--- /dev/null
+/*\r
+ LUFA Library\r
+ Copyright (C) Dean Camera, 2009.\r
+ \r
+ dean [at] fourwalledcubicle [dot] com\r
+ www.fourwalledcubicle.com\r
+*/\r
+\r
+/*\r
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+\r
+ Permission to use, copy, modify, and distribute this software\r
+ and its documentation for any purpose and without fee is hereby\r
+ granted, provided that the above copyright notice appear in all\r
+ copies and that both that the copyright notice and this\r
+ permission notice and warranty disclaimer appear in supporting\r
+ documentation, and that the name of the author not be used in\r
+ advertising or publicity pertaining to distribution of the\r
+ software without specific, written prior permission.\r
+\r
+ The author disclaim all warranties with regard to this\r
+ software, including all implied warranties of merchantability\r
+ and fitness. In no event shall the author be liable for any\r
+ special, indirect or consequential damages or any damages\r
+ whatsoever resulting from loss of use, data or profits, whether\r
+ in an action of contract, negligence or other tortious action,\r
+ arising out of or in connection with the use or performance of\r
+ this software.\r
+*/\r
+\r
+/** \file\r
+ *\r
+ * Main source file for the CDCHost demo. This file contains the main tasks of\r
+ * the demo and is responsible for the initial application hardware configuration.\r
+ */\r
+ \r
+#include "CDCHost.h"\r
+\r
+#if 0\r
+/* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in\r
+ * <stdio.h> can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string).\r
+ */\r
+ \r
+static int CDC_putchar(char c, FILE *stream)\r
+{ \r
+ Pipe_SelectPipe(CDC_DATAPIPE_OUT);\r
+ \r
+ if (Pipe_WaitUntilReady())\r
+ return -1;\r
+\r
+ Pipe_Write_Byte(c);\r
+ Pipe_ClearIN();\r
+ \r
+ return 0;\r
+}\r
+\r
+static int CDC_getchar(FILE *stream)\r
+{\r
+ int c;\r
+\r
+ Pipe_SelectPipe(CDC_DATAPIPE_IN);\r
+ \r
+ for (;;)\r
+ {\r
+ if (Pipe_WaitUntilReady())\r
+ return -1;\r
+ \r
+ if (!(Pipe_BytesInPipe()))\r
+ {\r
+ Pipe_ClearOUT();\r
+ }\r
+ else\r
+ {\r
+ c = Pipe_Read_Byte();\r
+ break;\r
+ }\r
+ }\r
+ \r
+ return c;\r
+}\r
+\r
+static FILE USBSerial = FDEV_SETUP_STREAM(CDC_putchar, CDC_getchar, _FDEV_SETUP_RW);\r
+#endif\r
+\r
+/** Main program entry point. This routine configures the hardware required by the application, then\r
+ * enters a loop to run the application tasks in sequence.\r
+ */\r
+int main(void)\r
+{\r
+ SetupHardware();\r
+\r
+ puts_P(PSTR(ESC_FG_CYAN "CDC Host Demo running.\r\n" ESC_FG_WHITE));\r
+\r
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
+\r
+ for (;;)\r
+ {\r
+ CDC_Host_Task();\r
+ USB_USBTask();\r
+ }\r
+}\r
+\r
+/** Configures the board hardware and chip peripherals for the demo's functionality. */\r
+void SetupHardware(void)\r
+{\r
+ /* Disable watchdog if enabled by bootloader/fuses */\r
+ MCUSR &= ~(1 << WDRF);\r
+ wdt_disable();\r
+\r
+ /* Disable clock division */\r
+ clock_prescale_set(clock_div_1);\r
+\r
+ /* Hardware Initialization */\r
+ SerialStream_Init(9600, false);\r
+ LEDs_Init();\r
+ USB_Init();\r
+}\r
+\r
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and\r
+ * starts the library USB task to begin the enumeration and USB management process.\r
+ */\r
+void EVENT_USB_Host_DeviceAttached(void)\r
+{\r
+ puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));\r
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
+}\r
+\r
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and\r
+ * stops the library USB task management process.\r
+ */\r
+void EVENT_USB_Host_DeviceUnattached(void)\r
+{\r
+ puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));\r
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
+}\r
+\r
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully\r
+ * enumerated by the host and is now ready to be used by the application.\r
+ */\r
+void EVENT_USB_Host_DeviceEnumerationComplete(void)\r
+{\r
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
+}\r
+\r
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */\r
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)\r
+{\r
+ USB_ShutDown();\r
+\r
+ printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"\r
+ " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);\r
+\r
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
+ for(;;);\r
+}\r
+\r
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while\r
+ * enumerating an attached USB device.\r
+ */\r
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
+{\r
+ printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"\r
+ " -- Error Code %d\r\n"\r
+ " -- Sub Error Code %d\r\n"\r
+ " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);\r
+ \r
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
+}\r
+\r
+/** Task to set the configuration of the attached device after it has been enumerated, and to read in\r
+ * data received from the attached CDC device and print it to the serial port.\r
+ */\r
+void CDC_Host_Task(void)\r
+{\r
+ uint8_t ErrorCode;\r
+\r
+ switch (USB_HostState)\r
+ {\r
+ case HOST_STATE_Addressed:\r
+ puts_P(PSTR("Getting Config Data.\r\n"));\r
+ \r
+ /* Get and process the configuration descriptor data */\r
+ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)\r
+ {\r
+ if (ErrorCode == ControlError)\r
+ puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));\r
+ else\r
+ puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));\r
+\r
+ printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
+ \r
+ /* Indicate error via status LEDs */\r
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
+\r
+ /* Wait until USB device disconnected */\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
+ break;\r
+ }\r
+ \r
+ /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */\r
+ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)\r
+ {\r
+ printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"\r
+ " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
+\r
+ /* Indicate error via status LEDs */\r
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
+\r
+ /* Wait until USB device disconnected */\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
+ break;\r
+ }\r
+\r
+ puts_P(PSTR("CDC Device Enumerated.\r\n"));\r
+\r
+ USB_HostState = HOST_STATE_Configured;\r
+ break;\r
+ case HOST_STATE_Configured:\r
+ /* Select the data IN pipe */\r
+ Pipe_SelectPipe(CDC_DATAPIPE_IN);\r
+ Pipe_SetPipeToken(PIPE_TOKEN_IN);\r
+ Pipe_Unfreeze();\r
+\r
+ /* Check to see if a packet has been received */\r
+ if (Pipe_IsINReceived())\r
+ {\r
+ /* Re-freeze IN pipe after the packet has been received */\r
+ Pipe_Freeze();\r
+\r
+ /* Check if data is in the pipe */\r
+ if (Pipe_IsReadWriteAllowed())\r
+ {\r
+ /* Get the length of the pipe data, and create a new buffer to hold it */\r
+ uint16_t BufferLength = Pipe_BytesInPipe();\r
+ uint8_t Buffer[BufferLength];\r
+ \r
+ /* Read in the pipe data to the temporary buffer */\r
+ Pipe_Read_Stream_LE(Buffer, BufferLength);\r
+ \r
+ /* Print out the buffer contents to the USART */\r
+ for (uint16_t BufferByte = 0; BufferByte < BufferLength; BufferByte++)\r
+ putchar(Buffer[BufferByte]);\r
+ }\r
+\r
+ /* Clear the pipe after it is read, ready for the next packet */\r
+ Pipe_ClearIN();\r
+ }\r
+\r
+ /* Re-freeze IN pipe after use */\r
+ Pipe_Freeze();\r
+\r
+ /* Select and unfreeze the notification pipe */\r
+ Pipe_SelectPipe(CDC_NOTIFICATIONPIPE);\r
+ Pipe_Unfreeze();\r
+ \r
+ /* Check if a packet has been received */\r
+ if (Pipe_IsINReceived())\r
+ {\r
+ /* Discard the unused event notification */\r
+ Pipe_ClearIN();\r
+ }\r
+ \r
+ /* Freeze notification IN pipe after use */\r
+ Pipe_Freeze();\r
+ \r
+ break;\r
+ }\r
+}\r
projects / pub / lufa.git / blobdiff