+/*\r
+ LUFA Library\r
+ Copyright (C) Dean Camera, 2009.\r
+ \r
+ dean [at] fourwalledcubicle [dot] com\r
+ www.fourwalledcubicle.com\r
+*/\r
+\r
+/*\r
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+\r
+ Permission to use, copy, modify, and distribute this software\r
+ and its documentation for any purpose and without fee is hereby\r
+ granted, provided that the above copyright notice appear in all\r
+ copies and that both that the copyright notice and this\r
+ permission notice and warranty disclaimer appear in supporting\r
+ documentation, and that the name of the author not be used in\r
+ advertising or publicity pertaining to distribution of the\r
+ software without specific, written prior permission.\r
+\r
+ The author disclaim all warranties with regard to this\r
+ software, including all implied warranties of merchantability\r
+ and fitness. In no event shall the author be liable for any\r
+ special, indirect or consequential damages or any damages\r
+ whatsoever resulting from loss of use, data or profits, whether\r
+ in an action of contract, negligence or other tortious action,\r
+ arising out of or in connection with the use or performance of\r
+ this software.\r
+*/\r
+\r
+#include "ConfigDescriptor.h"\r
+\r
+uint8_t ProcessConfigurationDescriptor(void)\r
+{\r
+ uint8_t* ConfigDescriptorData;\r
+ uint16_t ConfigDescriptorSize;\r
+ uint8_t ErrorCode;\r
+ uint8_t FoundEndpoints = 0;\r
+ uint8_t FoundEndpointMask;\r
+ \r
+ /* Get Configuration Descriptor size from the device */\r
+ if (USB_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, NULL) != HOST_SENDCONTROL_Successful)\r
+ return ControlError;\r
+ \r
+ /* Ensure that the Configuration Descriptor isn't too large */\r
+ if (ConfigDescriptorSize > MAX_CONFIG_DESCRIPTOR_SIZE)\r
+ return DescriptorTooLarge;\r
+ \r
+ /* Allocate enough memory for the entire config descriptor */\r
+ ConfigDescriptorData = alloca(ConfigDescriptorSize);\r
+\r
+ /* Retrieve the entire configuration descriptor into the allocated buffer */\r
+ USB_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData);\r
+ \r
+ /* Validate returned data - ensure first entry is a configuration header descriptor */\r
+ if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)\r
+ return InvalidConfigDataReturned;\r
+ \r
+ /* Get the printer interface from the configuration descriptor */\r
+ if ((ErrorCode = USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,\r
+ NextPrinterInterface)))\r
+ {\r
+ /* Descriptor not found, error out */\r
+ return NoInterfaceFound;\r
+ }\r
+\r
+ /* Get the printer's communication protocol */\r
+ PrinterProtocol = DESCRIPTOR_CAST(ConfigDescriptorData, USB_Descriptor_Interface_t).Protocol;\r
+ \r
+ /* Determine what endpoints to look for from the protocol */\r
+ switch (PrinterProtocol)\r
+ {\r
+ case PROTOCOL_UNIDIRECTIONAL:\r
+ FoundEndpointMask = (1 << PRINTER_DATA_OUT_PIPE);\r
+ break;\r
+ case PROTOCOL_BIDIRECTIONAL:\r
+ case PROTOCOL_IEEE1284:\r
+ FoundEndpointMask = ((1 << PRINTER_DATA_OUT_PIPE) | (1 << PRINTER_DATA_IN_PIPE));\r
+ break;\r
+ default:\r
+ return NoInterfaceFound;\r
+ }\r
+\r
+ /* Get the IN and OUT data endpoints for the mass storage interface */\r
+ while (FoundEndpoints != FoundEndpointMask)\r
+ {\r
+ /* Fetch the next bulk endpoint from the current printer interface */\r
+ if ((ErrorCode = USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,\r
+ NextInterfaceBulkDataEndpoint)))\r
+ {\r
+ /* Descriptor not found, error out */\r
+ return NoEndpointFound;\r
+ }\r
+ \r
+ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);\r
+\r
+ /* Check if the endpoint is a bulk IN or bulk OUT endpoint, set appropriate globals */\r
+ if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)\r
+ {\r
+ /* Configure the data IN pipe */\r
+ Pipe_ConfigurePipe(PRINTER_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,\r
+ EndpointData->EndpointAddress, EndpointData->EndpointSize,\r
+ PIPE_BANK_SINGLE);\r
+\r
+ Pipe_SetInfiniteINRequests();\r
+\r
+ /* Set the flag indicating that the data IN pipe has been found */\r
+ FoundEndpoints |= (1 << PRINTER_DATA_IN_PIPE);\r
+ }\r
+ else\r
+ {\r
+ /* Configure the data OUT pipe */\r
+ Pipe_ConfigurePipe(PRINTER_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,\r
+ EndpointData->EndpointAddress, EndpointData->EndpointSize,\r
+ PIPE_BANK_SINGLE);\r
+\r
+ /* Set the flag indicating that the data OUT pipe has been found */\r
+ FoundEndpoints |= (1 << PRINTER_DATA_OUT_PIPE);\r
+ } \r
+ }\r
+\r
+ /* Valid data found, return success */\r
+ return SuccessfulConfigRead;\r
+}\r
+\r
+uint8_t NextPrinterInterface(void* CurrentDescriptor)\r
+{\r
+ /* PURPOSE: Find next mass storage class interface descriptor */\r
+\r
+ if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)\r
+ {\r
+ /* Check the descriptor class and protocol, break out if correct class/protocol interface found */\r
+ if ((DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Class == PRINTER_CLASS) &&\r
+ (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).SubClass == PRINTER_SUBCLASS))\r
+ {\r
+ return DESCRIPTOR_SEARCH_Found;\r
+ }\r
+ }\r
+ \r
+ return DESCRIPTOR_SEARCH_NotFound;\r
+}\r
+\r
+uint8_t NextInterfaceBulkDataEndpoint(void* CurrentDescriptor)\r
+{\r
+ /* PURPOSE: Find next interface bulk endpoint descriptor before next interface descriptor */\r
+\r
+ if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint)\r
+ {\r
+ uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor,\r
+ USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK);\r
+\r
+ /* Check the endpoint type, break out if correct BULK type endpoint found */\r
+ if (EndpointType == EP_TYPE_BULK)\r
+ return DESCRIPTOR_SEARCH_Found;\r
+ }\r
+ else if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)\r
+ {\r
+ return DESCRIPTOR_SEARCH_Fail;\r
+ }\r
+\r
+ return DESCRIPTOR_SEARCH_NotFound;\r
+}\r
projects / pub / lufa.git / blobdiff