Alter the bootloader section sizes to all be 8KB, to be in line with the default...

[pub/lufa.git] / Bootloaders / DFU / BootloaderDFU.txt

diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt
index e10beea..2c9eaf1 100644 (file)
--- a/Bootloaders/DFU/BootloaderDFU.txt
+++ b/Bootloaders/DFU/BootloaderDFU.txt
@@ -47,9 +47,9 @@
  *  This bootloader enumerates to the host as a DFU Class device, allowing for DFU-compatible programming
  *  software to load firmware onto the AVR.
  *
- *  Out of the box this bootloader builds for the AT90USBUSB1287, and will fit into 4KB of bootloader space.
- *  If you wish to enlarge this space and/or change the AVR model, you will need to edit the MCU, FLASH_SIZE_KB
- *  and BOOT_SECTION_SIZE_KB values in the accompanying makefile.
+ *  Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit
+ *  into 4KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to
+ *  edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile.
  *
  *  When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the
  *  bootloader from the normal user application.