/** \page Page_ChangeLog Project Changelog
*
- * \section Sec_ChangeLogXXXXXX Version XXXXXX
+ * \section Sec_ChangeLog111009 Version 111009
+ * <b>New:</b>
+ * - Core:
+ * - Added USE_LUFA_CONFIG_HEADER compile time option to include a LUFAConfig.h header in the user director for LUFA configuration
+ * tokens as an alternative to tokens defined in the project makefile
+ * - Added new USB_Host_SetInterfaceAltSetting() convenience function for the selection of an interface's alternative setting
+ * - Added Audio class control request definitions
+ * - Added new CALLBACK_Audio_Device_GetSetEndpointProperty() callback to the Audio Device Class driver to allow for endpoint control manipulations
+ * such as data sample rates
+ * - Added support for the Audio class GET STATUS request in the Audio Device Class driver so that it is correctly ACKed when sent by the host
+ * - Added new EVENT_Audio_Device_StreamStartStop() event to the Audio Device Class driver to detect stream start/stop events
+ * - Added board driver support for the Busware TUL board
+ * - Added board hardware driver support for the EVK1100 board
+ * - Added board hardware driver support for the EVK1104 board
+ * - Added new Host mode Audio Class driver
+ * - Added new SPI_GetCurrentMode() function to the SPI peripheral driver
+ * - Added RingBuffer_GetFreeCount() function to the Ring Buffer driver
+ * - Added new HID_Host_SetIdlePeriod() function to the HID Host Class driver
+ * - Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device
+ * - Added new USB_Host_GetDeviceStatus() function to the host standard request function set
+ * - Added AVR USB XMEGA architecture port (currently incomplete/experimental)
+ * - Added new STRINGIFY() and STRINGIFY_EXPANDED() convenience macros
+ * - Added new JTAG_DISABLE() macro for the AVR8 architecture
+ * - Added Device Qualifier standard descriptor structure definitions USB_StdDescriptor_DeviceQualifier_t and USB_Descriptor_DeviceQualifier_t
+ * - Library Applications:
+ * - Added RNDIS device mode to the Webserver project
+ * - Added new incomplete AndroidAccessoryHost Host LowLevel demo
+ * - Added new HIDReportViewer project
+ * - Added new MediaControl project
+ * - Added new AudioInputHost Host ClassDriver demo
+ * - Added new AudioOutputHost Host ClassDriver demo
+ * - Added new AudioInputHost Host LowLevel demo
+ * - Added new AudioOutputHost Host LowLevel demo
+ * - Added new "checksource" target to all library project makefiles
+ * - Added new VTARGET_USE_INTERNAL_REF configuration option to the AVRISP-MKII clone project (thanks to Volker Bosch)
+ *
+ * <b>Changed:</b>
+ * - Core:
+ * - Altered the definition of the USB_Audio_Descriptor_Format_t descriptor so that the user is now responsible for supplying
+ * the supported audio sampling rates, to allow for multiple audio interfaces with different numbers of supported rates and/or
+ * continuous sample rates
+ * - Pipe_BoundEndpointNumber() has been renamed to Pipe_GetBoundEndpointAddress(), and now returns the correct endpoint direction
+ * as part of the endpoint address
+ * - Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to,
+ * by changing the USB_* prefix to USB_Device_* or USB_Host_*
+ * - Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required
+ * - Altered the USB_Host_SetDeviceConfiguration() function to update the global Host state machine state and the new
+ * USB_Host_ConfigurationNumber global as required
+ * - Added endian correcting code to the library USB class drivers for multiple architecture support
+ * - Removed the ENDPOINT_DESCRIPTOR_DIR_* macros, replaced by ENDPOINT_DIR_* instead
+ * - Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT()
+ * - Added variable number of axis to HID_DESCRIPTOR_JOYSTICK() for multi-axis joysticks above just X and Y
+ * - Renamed USB_Host_ClearPipeStall() to USB_Host_ClearEndpointStall() as the function works on an endpoint address within the attached device,
+ * and not a Pipe within the host
+ * - The MS_Host_ResetMSInterface() now performs a full Mass Storage reset sequence to prevent data corruption in the event of a device
+ * lock up or timeout (thanks to David Lyons)
+ * - Added endian-correction to the CDC driver's Line Encoding control request handlers.
+ * - Library Applications:
+ * - Modified the Low Level and Class Driver AudioInput and AudioOutput demos to support multiple audio sample rates
+ * - Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration
+ * instead of manual host state machine manipulations in the main application task
+ * - Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines
+ * - Added reliability patches to the AVRISP-MKII Clone project's ISP and PDI/TPI protocols (thanks to Justin Mattair)
+ *
+ * <b>Fixed:</b>
+ * - Core:
+ * - Large number of documentation and code comment corrections (thanks to Andrey from Microsin.ru)
+ * - Fixed possibility of the AVR's SPI interface being pulled out of master mode if the /SS pin is a input and pulled low (thanks
+ * to Andrey from Microsin.ru)
+ * - Fixed compile error when FIXED_CONTROL_ENDPOINT_SIZE compile time option was disabled, and a USE_*_DESCRIPTORS compile time
+ * option was not enabled on the AVR8s
+ * - Fixed lack of C++ compatibility in some internal header files causing compile errors when using LUFA in C++ projects
+ * - Fixed error in the pipe unordered allocation algorithm for the AVR8 devices breaking compatibility with some devices
+ * - Fixed USB_USBTask not being called internally in stream transfers between packets when Partial Stream Transfers are used
+ * - Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values
+ * - Fixed TWI_ReadPacket() not releasing the TWI bus on read completion
+ * - Fixed optimization error in the HID Parser item value USB_SetHIDReportItemInfo() and USB_GetHIDReportItemInfo() routines if the report item was
+ * \c NULL (which should be allowable according to the API)
+ * - Fixed HID Parser CALLBACK_HIDParser_FilterHIDReportItem() callback function not being passed a cacheable report item pointer
+ * - Fixed HID Parser's largest report size bit count not including the size of the last parsed report item
+ * - Fixed HID host driver's largest HID report size count corrupt when the number of report bits exceeds 255
+ * - Library Applications:
+ * - Fixed incorrect signature in the CDC and DFU class bootloaders for the ATMEGA8U2
+ * - Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed
+ * - Fixed compile errors in the incomplete BluetoothHost demo application (thanks to Timo Lindfors)
+ * - Fixed incorrect Dataflash buffer use in the DataflashManager_WriteBlocks_RAM() function of several demos/projects (thanks to Jeremy Willden)
+ * - Fixed incorrect logging interval (always 500ms longer than requested) in the TempDataLogger project
+ * - Fixed incorrect buffer size check in the USBtoSerial project (thanks to Yuri A Nikiforov)
+ * - Fixed port state table corruption in the TCP layer of the RNDIS Ethernet device demos
+ *
+ * \section Sec_ChangeLog110528 Version 110528
* <b>New:</b>
* - Core:
* - Added new ORDERED_EP_CONFIG compile time option to restrict endpoint/pipe configuration to ascending order
* - Added new Endpoint_Null_Stream() and Pipe_Null_Stream() functions
* - Added new ADC_GET_CHANNEL_MASK() convenience macro
* - Added new HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors
- * - Added new HID_DESCRIPTOR_MOUSE, HID_DESCRIPTOR_KEYBOARD, HID_DESCRIPTOR_JOYSTICK and HID_DESCRIPTOR_VENDOR macros
+ * - Added new HID_DESCRIPTOR_MOUSE(), HID_DESCRIPTOR_KEYBOARD(), HID_DESCRIPTOR_JOYSTICK() and HID_DESCRIPTOR_VENDOR() macros
* for easy automatic creation of basic USB HID device reports
* - Added new MAX() and MIN() convenience macros
* - Added new Serial_SendData() function to the Serial driver
* - Added board driver support for the Sparkfun ATMEGA8U2 breakout board
* - Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus)
* - Internal restructuring for eventual multiple architecture ports
- * - Added start of an AVR32 UC3 architecture port (currently incomplete/experimental)
+ * - Added AVR32 UC3 architecture port (currently incomplete/experimental)
+ * - Added new architecture independent functions to enable, disable, save and restore the Global Interrupt Enable flags
+ * - Added new RNDIS Device Class Driver packet send and receive functions
* - Library Applications:
* - Added ability to write protect Mass Storage disk write operations from the host OS
* - Added new MIDIToneGenerator project
* - Added new KeyboardMouseMultiReport Device ClassDriver demo
+ * - Added new VirtualSerialMassStorage Device ClassDriver demo
* - Added HID class bootloader, compatible with a modified version of the command line Teensy loader from PJRC.com
+ * - Added LED flashing to the CDC and DFU class bootloaders to indicate when they are running
*
* <b>Changed:</b>
* - Core:
* - Removed Pipe_ClearErrorFlags(), pipe error flags are now automatically cleared when Pipe_ClearError() is called
* - Endpoint_ResetFIFO() renamed to Endpoint_ResetEndpoint(), to be consistent with the Pipe_ResetPipe() function name
* - Implemented on-demand PLL clock generation for the U4, U6 and U7 series USB AVRs when automatic PLL mode is specified
+ * - F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports
+ * - Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of
+ * a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures
+ * - Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of
+ * a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures
+ * - Separated out board drivers by architecture in the library internals for better organisation
* - Library Applications:
* - Changed the XPLAINBridge software UART to use the regular timer CTC mode instead of the alternative CTC mode
* via the Input Capture register, to reduce user confusion
* - Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition
* - Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0
* for other uses
- * - Updated the software USART code in the XPLAIN Bridge application so that the incomming bits are sampled at their mid-point
- * instead of starting point, to give maximum reliability (thanks to Anton)
+ * - Updated the software USART code in the XPLAIN Bridge application so that the incoming bits are sampled at their mid-point
+ * instead of starting point, to give maximum reliability (thanks to Anton Staaf)
*
* <b>Fixed:</b>
* - Core:
* - Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.)
* - Fixed incorrect definition of the HID_KEYBOARD_SC_RIGHT_ARROW constant in the HID class driver (thanks to Joby Taffey)
* - Fixed incorrect endpoint initialisation order in the several device demos (thanks to Rick Drolet)
- * - Fixed inverted Minimum board LEDs
+ * - Fixed inverted Minimus board LEDs
* - Fixed incorrect byte ordering in the Audio_Device_WriteSample24 function (thanks to WZab)
* - Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect
* error code enum (thanks to Daniel Seibert)
* - Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used
- * - Fixed incorect BUTTONS_BUTTON1 definition for the Minimus board
+ * - Fixed incorrect BUTTONS_BUTTON1 definition for the Minimus board
* - Fixed Still Image Host class driver exiting the descriptor search routine prematurely if the data pipes (but not event pipe)
* is found
* - Fixed missing call to Pipe_SetInfiniteINRequests() in the Pipe_ConfigurePipe() routine
+ * - Fixed Remote Wakeup broken on the AVRs due to the mechanism only operating when the SUSPI bit is set (thanks to Holger Steinhaus)
+ * - Fixed possible invalid program execution when in host mode if corrupt descriptor lengths are supplied by the attached device
* - Library Applications:
* - Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy
* - Fixed broken DFU bootloader, added XPLAIN support for bootloader start when XCK jumpered to ground
* - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
* - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
* tasks for each driver is called
- * - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
+ * - Added standard keyboard HID report scan-code defines (thanks to Laszlo Monda)
* - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
* - Library Applications:
* - Added default test tone generation mode to the Device mode AudioInput demos
* - Pipe stream functions now automatically set the correct pipe token, so that bidirectional pipes can be used
* - Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling
* the existing Pipe_SetFiniteINRequests() function
- * - Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case
+ * - Changed F_USB entries in project makefiles to alias to F_CPU by default, as this is the most common case
* - Host mode demos now use sane terminal escape codes, so that text is always readable and events/program output is visually distinguished
* from one another using foreground colours
* - Internal per-device preprocessing conditions changed to per-device series rather than per-controller group for finer-grain
* - Fixed KeyboardMouse demo discarding the wIndex value in the REQ_GetReport request
* - USBtoSerial demo now discards all Rx data when not connected to a USB host, rather than buffering characters for transmission
* next time the device is attached to a host.
- * - Added new F_CLOCK compile time constant to the library and makefiles, to give the raw input clock (used to feed the PLL before any
+ * - Added new F_USB compile time constant to the library and makefiles, to give the raw input clock (used to feed the PLL before any
* clock prescaling is performed) frequency, so that the PLL prescale mask can be determined
* - Changed stream wait timeout counter to be 16-bit, so that very long timeout periods can be set for correct communications with
* badly designed hosts or devices which greatly exceed the USB specification limits
* - Library license changed from LGPLv3 to MIT license
*
*
- * \section Sec_ChangeLog151 Version 1.5.1 - Released 31st July, 2008
+ * \section Sec_ChangeLog151 Version 1.5.1 - Released 7th July, 2008
*
* - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event
* rather than the USB_DeviceAttached event
* - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names
*
*
- * \section Sec_ChangeLog141 Version 1.4.1 - Released 5 May, 2008
+ * \section Sec_ChangeLog141 Version 1.4.1 - Released 19 May, 2008
*
* - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo
* - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly
projects / pub / lufa.git / blobdiff