Upgrade doxygen configuration files to the latest version.

[pub/lufa.git] / Demos / Device / ClassDriver / MassStorage / MassStorage.txt

diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
index 3038862..5759efa 100644 (file)
--- a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
+++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
@@ -10,10 +10,13 @@
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
- *  - Series 7 USB AVRs (AT90USBxxx7)
- *  - Series 6 USB AVRs (AT90USBxxx6)
- *  - Series 4 USB AVRs (ATMEGAxxU4)
- *  - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
  *
  *  \section Sec_Info USB Information:
  *
@@ -40,31 +43,30 @@
  *        SCSI Block Commands Specification</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
  *
  *  \section Sec_Description Project Description:
  *
- *  Dual LUN Mass Storage demonstration application. This gives a simple
- *  reference application for implementing a multiple LUN USB Mass Storage
- *  device using the basic USB UFI drivers in all modern OSes (i.e. no
- *  special drivers required).
+ *  Mass Storage device demonstration application. This gives a simple
+ *  reference application for implementing a USB Mass Storage device using
+ *  the basic USB UFI drivers in all modern OSes (i.e. no special drivers
+ *  required).
  *
  *  On start-up the system will automatically enumerate and function as an
- *  external mass storage device with two LUNs (separate disks) which may
- *  be formatted and used in the same manner as commercial USB Mass Storage
- *  devices.
+ *  external mass storage device which may be formatted and used in the same
+ *  manner as commercial USB Mass Storage devices.
  *
- *  You will need to format the mass storage drives upon first run of this
+ *  You will need to format the mass storage drive upon first run of this
  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.
  *
- *  This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
- *  value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
- *  255), with each LUN being allocated an equal portion of the available
+ *  This demo is not restricted to only a single LUN (logical disk); by changing
+ *  the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
+ *  (from 1 to 255), with each LUN being allocated an equal portion of the available
  *  Dataflash memory.
  *
  *  The USB control endpoint is managed entirely by the library using endpoint
@@ -78,16 +80,21 @@
  *
  *  <table>
  *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
  *   </tr>
  *   <tr>
  *    <td>TOTAL_LUNS</td>
- *    <td>MassStorage.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
  *        this can be set to any positive non-zero amount.</td>
  *   </tr>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ *   </tr>
  *  </table>
  */