+ * the existing Pipe_SetFiniteINRequests() function\r
+ * - Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case\r
+ * - Host mode demos now use sane terminal escape codes, so that text is always readable and events/program output is visually distinguished\r
+ * from oneanother using foreground colours\r
+ * - Internal per-device preprocessing conditions changed to per-device series rather than per-controller group for finer-grain\r
+ * internal control\r
+ * - Interrupts are no longer disabled during the processing of Control Requests on the default endpoint while in device mode\r
+ * - AudioOutput demos now always output to board LEDs, regardless of output mode (removed AUDIO_OUT_LEDS project option)\r
+ * - Removed SINGLE_DEVICE_CONFIGURATION compile time option in favour of the new FIXED_NUM_CONFIGURATIONS option so that the exact number\r
+ * of device configurations can be defined statically\r
+ * - Removed VBUS events, as they are already exposed to the user application via the regular device connection and disconnection events\r
+ * - Renamed and altered existing events to properly seperate out Host and Device mode events\r
+ *\r
+ * <b>Fixed:</b>\r
+ * - Changed bootloaders to use FLASHEND rather than the existence of RAMPZ to determine if far FLASH pointers are needed to fix\r
+ * bootloaders on some of the USB AVR devices where avr-libc erronously defines RAMPZ\r
+ * - Fixes to MassStorageHost for better device compatibility (increase command timeout, change MassStore_WaitForDataReceived()\r
+ * to only unfreeze and check one data pipe at a time) to prevent incorrect device enumerations and freezes while trasferring data\r
+ * - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is\r
+ * cleared to prevent endpoint type corruption\r
+ * - Fixed issue opening CDC-ACM ports on hosts when the CDC device tries to send data before the host has set the line encoding\r
+ * - Fixed USB_OPT_MANUAL_PLL option being ignored during device disconnects on some models (thanks to Brian Dickman)\r
+ * - Fixed documentation mentioning Pipe_GetCurrentToken() function when correct function name is Pipe_GetPipeToken()\r
+ * - Fixed ADC driver for the ATMEGA32U4 and ATMEGA16U4 (thanks to Opendous Inc.)\r
+ * - Fixed CDCHost demo unfreezing the pipes at the point of configuration, rather than use\r
+ * - Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command\r
+ * - Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails\r
+ * - Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used\r
+ * - Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected\r
+ * - Fixed Mouse/Keyboard demos not performing the correct arithmetic on the Idle period at the right times (thanks to Brian Dickman)\r
+ * - Fixed GenericHID failing HID class tests due to incorrect Logical Minimum and Logical Maximum values (thanks to Søren Greiner)\r
+ * - Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews)\r
+ * - Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits\r
+ * - Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered\r
+ * - Fixed incorrect BUTTONS_BUTTON1 for the STK526 target\r
+ * - Fixed RNDIS demos freezing when more than one connection was attempted simultaneously, causing memory corruption\r
+ * - Fixed USBtoSerial demo receiving noise from the USART due to pullup not being enabled\r
projects / pub / lufa.git / blobdiff