All USB class drivers are now automatically included when LUFA/Drivers/USB.h is inclu...

[pub/lufa.git] / Demos / Host / LowLevel / MassStorageHost / Lib / SCSI_Codes.h

diff --git a/Demos/Host/LowLevel/MassStorageHost/Lib/SCSI_Codes.h b/Demos/Host/LowLevel/MassStorageHost/Lib/SCSI_Codes.h
deleted file mode 100644 (file)
index 6bcd578..0000000
--- a/Demos/Host/LowLevel/MassStorageHost/Lib/SCSI_Codes.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2010.
-
-  dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
-*/
-
-/*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaim all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header containing macros for possible SCSI commands and SENSE data. Refer to
- *  the SCSI standard documentation for more information on each SCSI command and
- *  the SENSE data.
- */
-
-#ifndef _SCSI_CODES_H_
-#define _SCSI_CODES_H_
-
-       /* Macros: */
-               #define SCSI_CMD_INQUIRY                               0x12
-               #define SCSI_CMD_REQUEST_SENSE                         0x03
-               #define SCSI_CMD_TEST_UNIT_READY                       0x00
-               #define SCSI_CMD_READ_CAPACITY_10                      0x25
-               #define SCSI_CMD_SEND_DIAGNOSTIC                       0x1D
-               #define SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL          0x1E
-               #define SCSI_CMD_WRITE_10                              0x2A
-               #define SCSI_CMD_READ_10                               0x28
-               #define SCSI_CMD_WRITE_6                               0x0A
-               #define SCSI_CMD_READ_6                                0x08
-               #define SCSI_CMD_VERIFY_10                             0x2F
-               #define SCSI_CMD_MODE_SENSE_6                          0x1A
-               #define SCSI_CMD_MODE_SENSE_10                         0x5A
-
-               #define SCSI_SENSE_KEY_GOOD                            0x00
-               #define SCSI_SENSE_KEY_RECOVERED_ERROR                 0x01
-               #define SCSI_SENSE_KEY_NOT_READY                       0x02
-               #define SCSI_SENSE_KEY_MEDIUM_ERROR                    0x03
-               #define SCSI_SENSE_KEY_HARDWARE_ERROR                  0x04
-               #define SCSI_SENSE_KEY_ILLEGAL_REQUEST                 0x05
-               #define SCSI_SENSE_KEY_UNIT_ATTENTION                  0x06
-               #define SCSI_SENSE_KEY_DATA_PROTECT                    0x07
-               #define SCSI_SENSE_KEY_BLANK_CHECK                     0x08
-               #define SCSI_SENSE_KEY_VENDOR_SPECIFIC                 0x09
-               #define SCSI_SENSE_KEY_COPY_ABORTED                    0x0A
-               #define SCSI_SENSE_KEY_ABORTED_COMMAND                 0x0B
-               #define SCSI_SENSE_KEY_VOLUME_OVERFLOW                 0x0D
-               #define SCSI_SENSE_KEY_MISCOMPARE                      0x0E
-
-               #define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION          0x00
-               #define SCSI_ASENSE_LOGICAL_UNIT_NOT_READY             0x04
-               #define SCSI_ASENSE_INVALID_COMMAND                    0x20
-               #define SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x21
-               #define SCSI_ASENSE_INVALID_FIELD_IN_CDB               0x24
-               #define SCSI_ASENSE_WRITE_PROTECTED                    0x27
-               #define SCSI_ASENSE_NOT_READY_TO_READY_CHANGE          0x28
-               #define SCSI_ASENSE_FORMAT_ERROR                       0x31
-               #define SCSI_ASENSE_MEDIUM_NOT_PRESENT                 0x3A
-
-               #define SCSI_ASENSEQ_NO_QUALIFIER                      0x00
-               #define SCSI_ASENSEQ_FORMAT_COMMAND_FAILED             0x01
-               #define SCSI_ASENSEQ_INITIALIZING_COMMAND_REQUIRED     0x02
-               #define SCSI_ASENSEQ_OPERATION_IN_PROGRESS             0x07
-
-#endif
-