Spell check more of the third party libraries used by LUFA.

[pub/lufa.git] / Projects / USBtoSerial / USBtoSerial.c

diff --git a/Projects/USBtoSerial/USBtoSerial.c b/Projects/USBtoSerial/USBtoSerial.c
index 7a0f686..d7df3d9 100644 (file)
--- a/Projects/USBtoSerial/USBtoSerial.c
+++ b/Projects/USBtoSerial/USBtoSerial.c
@@ -82,21 +82,23 @@ int main(void)
        for (;;)
        {
                /* Read bytes from the USB OUT endpoint into the USART transmit buffer */
        for (;;)
        {
                /* Read bytes from the USB OUT endpoint into the USART transmit buffer */

-               for (uint8_t DataBytesRem = CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface); DataBytesRem != 0; DataBytesRem--)
+               int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+               if (!(ReceivedByte < 0) && !(RingBuffer_IsFull(&USBtoUSART_Buffer)))
+                 RingBuffer_AtomicInsert(&USBtoUSART_Buffer, (uint8_t)ReceivedByte);           
+               
+               /* Check if the software USART flush timer has expired */
+               if (TIFR0 & (1 << TOV0))

                {
                {

-                       if (!(BUFFER_SIZE - USBtoUSART_Buffer.Count))
-                         break;
-                         
-                       RingBuffer_Insert(&USBtoUSART_Buffer, CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface));
+                       TIFR0 |= (1 << TOV0);
+
+                       /* Read bytes from the USART receive buffer into the USB IN endpoint */
+                       while (USARTtoUSB_Buffer.Count)
+                         CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_AtomicRemove(&USARTtoUSB_Buffer));

                }
                
                }
                

-               /* Read bytes from the USART receive buffer into the USB IN endpoint */
-               while (USARTtoUSB_Buffer.Count)
-                 CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&USARTtoUSB_Buffer));
-               
-               /* Load bytes from the USART transmit buffer into the USART */
-               while (USBtoUSART_Buffer.Count)
-                 Serial_TxByte(RingBuffer_Remove(&USBtoUSART_Buffer));
+               /* Load the next byte from the USART transmit buffer into the USART */
+               if (USBtoUSART_Buffer.Count)
+                 Serial_TxByte(RingBuffer_AtomicRemove(&USBtoUSART_Buffer));

                
                CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
                USB_USBTask();
                
                CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
                USB_USBTask();


@@ -114,9 +116,11 @@ void SetupHardware(void)
        clock_prescale_set(clock_div_1);
 
        /* Hardware Initialization */
        clock_prescale_set(clock_div_1);
 
        /* Hardware Initialization */

-       Serial_Init(9600, false);

        LEDs_Init();
        USB_Init();
        LEDs_Init();
        USB_Init();

+
+       /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */
+       TCCR0B = (1 << CS02);

 }
 
 /** Event handler for the library USB Connection event. */
 }
 
 /** Event handler for the library USB Connection event. */


@@ -190,9 +194,17 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
                        ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
                        break;
        }
                        ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
                        break;
        }

+
+       /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
+       UCSR1B = 0;
+       UCSR1A = 0;
+       UCSR1C = 0;
+
+       /* Set the new baud rate before configuring the USART */
+       UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);

        
        

+       /* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
+       UCSR1C = ConfigMask;

        UCSR1A = (1 << U2X1);   
        UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
        UCSR1A = (1 << U2X1);   
        UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));

-       UCSR1C = ConfigMask;    
-       UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);

 }
 }