* - Added TPI programming support for 6-pin ATTINY to the AVRISP programmer project\r
* - Added command timeout counter to the AVRISP project so that the device no longer freezes when incorrectly connected\r
* to a target\r
+ * - Added new TemperatureDataLogger application, a USB data logger which writes to the device's dataflash and appears to\r
+ * the host as a standard Mass Storage device when inserted\r
+ * - Added MIDI event packing support to the MIDI Device and Host mode Class drivers, allowing for multiple MIDI events to\r
+ * sent or received in packed form in a single USB packet\r
+ * - Added new MIDI send buffer flush routines to the MIDI Device and Host mode Class drivers, to flush packed events\r
+ * - Added master mode hardware TWI driver\r
+ * - Added ADC MUX masks for the standard ADC input channels on all AVR models with an ADC, altered demos to use these masks\r
+ * as on some models, the channel number is not identical to its single-ended ADC MUX mask\r
*\r
* <b>Changed:</b>\r
- * - Slowed down bit-banged PDI programming in the AVRISP project slightly to prevent transmission errors\r
+ * - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors\r
+ * - Renamed the AVRISP project folder to AVRISP-MKII to reduce confusion\r
+ * - Renamed the RESET_LINE_* makefile tokens in the AVRISP MKII Project to AUX_LINE_*, as they are not always used for target\r
+ * reset\r
+ * - Changed over the MassStorageKeyboard Class driver device demo to use Start of Frame events rather than a timer to keep track\r
+ * of elapsed milliseconds\r
+ * - Inlined currently unused (but standardized) maintenance functions in the Device and Host Class drivers to save space\r
+ * - The XPLAINBridge project now selects between a USB to Serial bridge and a PDI programmer on startup, reading the JTAG port's\r
+ * TDI pin to determine which mode to use\r
*\r
* <b>Fixed:</b>\r
* - Fixed AVRISP project not able to enter programming mode when ISP protocol is used\r
+ * - Fixed AVRISP PDI race condition where the guard time between direction changes could be interpreted as a start bit\r
+ * - Fixed ADC_IsReadingComplete() returning an inverted result\r
+ * - Fixed blocking CDC streams not aborting when the host is disconnected\r
+ * - Fixed XPLAIN board Dataflash driver broken due to incorrect preprocessor commands\r
+ * - Fixed inverted XPLAIN LED driver output (LED turned on when it was supposed to be turned off, and vice-versa)\r
+ * - Fixed Class Driver struct interface numbers in the KeyboardMouse and VirtualSerialMouse demos (thanks to Renaud Cerrato)\r
+ * - Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers\r
+ * - Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders\r
+ * - Fixed Benito project not resetting the target AVR automatically when programming has completed\r
+ * - Fixed DFU bootloader programming not discarding the correct number of filler bytes from the host when non-aligned programming\r
+ * ranges are specified (thanks to Thomas Bleeker)\r
*\r
* \section Sec_ChangeLog091223 Version 091223\r
*\r
projects / pub / lufa.git / blobdiff