Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing...

[pub/lufa.git] / LUFA / Drivers / Peripheral / AVR8 / SPI_AVR8.h

diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index 48b8740..d6dc248 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -70,7 +70,7 @@
  *      // Send a byte, and store the received byte from the same transaction
  *      uint8_t ResponseByte = SPI_TransferByte(0xDC);
  *  \endcode
- * 
+ *
  *  @{
  */
 
@@ -139,7 +139,7 @@
                        /** SPI data sample mode mask for \c SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
                        #define SPI_SAMPLE_TRAILING            (1 << CPHA)
                        //@}
-                       
+
                        /** \name SPI Data Ordering Configuration Masks */
                        //@{
                        /** SPI data order mask for \c SPI_Init(). Indicates that data should be shifted out MSB first. */
@@ -148,7 +148,7 @@
                        /** SPI data order mask for \c SPI_Init(). Indicates that data should be shifted out LSB first. */
                        #define SPI_ORDER_LSB_FIRST            (1 << DORD)
                        //@}
-                       
+
                        /** \name SPI Mode Configuration Masks */
                        //@{
                        /** SPI mode mask for \c SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
@@ -157,7 +157,7 @@
                        /** SPI mode mask for \c SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
                        #define SPI_MODE_MASTER                (1 << MSTR)
                        //@}
-                       
+
                /* Inline Functions: */
                        /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
                         *  SPI routines.
@@ -195,7 +195,7 @@
                                SPCR   = 0;
                                SPSR   = 0;
                        }
-                       
+
                        /** Retrieves the currently selected SPI mode, once the SPI interface has been configured.
                         *
                         *  \return \ref SPI_MODE_MASTER if the interface is currently in SPI Master mode, \ref SPI_MODE_SLAVE otherwise