Ensure new Benito Programmer project matches Don's established LED behaviour - flash...

[pub/lufa.git] / LUFA / ManPages / ChangeLog.txt

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 1610059..b7c1e28 100644 (file)
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -26,6 +26,12 @@
   *  - Added new FAST_STREAM_TRANSFERS compile time option for faster stream transfers via multiple bytes copied per stream loop\r
   *  - Added stdio stream demo code to the low-level CDC demo, to show how to create standard streams out of the virtual serial ports\r
   *  - Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions\r
   *  - Added new FAST_STREAM_TRANSFERS compile time option for faster stream transfers via multiple bytes copied per stream loop\r
   *  - Added stdio stream demo code to the low-level CDC demo, to show how to create standard streams out of the virtual serial ports\r
   *  - Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions\r

+  *  - Added new USE_FLASH_DESCRIPTORS and TOTAL_NUM_CONFIGURATIONS compile time options\r
+  *  - Added support for the new ATMEGA32U2, ATMEGA16U2 and ATMEGA8U2 AVR models\r
+  *  - Added new PrinterHost demo (thanks to John Andrews)\r
+  *  - Added new USB_DeviceState variable to keep track of the current Device mode USB state\r
+  *  - Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers\r
+  *  - Added new Benito Arduino Programmer project\r

   *  \r
   *  <b>Changed:</b>\r
   *  - Deprecated psuedo-scheduler and removed dynamic memory allocator from the library (first no longer needed and second unused)\r
   *  \r
   *  <b>Changed:</b>\r
   *  - Deprecated psuedo-scheduler and removed dynamic memory allocator from the library (first no longer needed and second unused)\r


@@ -40,12 +46,18 @@
   *  - Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning,\r
   *    no need to call Dataflash_ToggleSelectedChipCS() afterwards\r
   *  - Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case\r
   *  - Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning,\r
   *    no need to call Dataflash_ToggleSelectedChipCS() afterwards\r
   *  - Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case\r

+  *  - The device-mode CALLBACK_USB_GetDescriptor() function now has an extra parameter so that the memory space in which the requested\r
+  *    descriptor is located can be specified. This means that descriptors can now be located in multiple memory spaces within a device.\r
+  *  - Host mode demos now use sane terminal escape codes, so that text is always readable and events/program output is visually distinguished\r
+  *    from oneanother using foreground colours\r
+  *  - Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality\r
+  *  - Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead\r

   *\r
   *  <b>Fixed:</b>\r
   *  - Changed bootloaders to use FLASHEND rather than the existence of RAMPZ to determine if far FLASH pointers are needed to fix\r
   *    bootloaders on some of the USB AVR devices where avr-libc erronously defines RAMPZ\r
   *  - Fixes to MassStorageHost for better device compatibility (increase command timeout, change MassStore_WaitForDataReceived()\r
   *\r
   *  <b>Fixed:</b>\r
   *  - Changed bootloaders to use FLASHEND rather than the existence of RAMPZ to determine if far FLASH pointers are needed to fix\r
   *    bootloaders on some of the USB AVR devices where avr-libc erronously defines RAMPZ\r
   *  - Fixes to MassStorageHost for better device compatibility (increase command timeout, change MassStore_WaitForDataReceived()\r

-  *    to only unfreeze and check one data pipe at a time) to prevent incorrect enumerations and freezes\r
+  *    to only unfreeze and check one data pipe at a time) to prevent incorrect device enumerations and freezes while trasferring data\r

   *  - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is\r
   *    cleared to prevent endpoint type corruption\r
   *  - Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken()\r
   *  - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is\r
   *    cleared to prevent endpoint type corruption\r
   *  - Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken()\r


@@ -55,6 +67,9 @@
   *  - Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails\r
   *  - Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used\r
   *  - Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected\r
   *  - Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails\r
   *  - Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used\r
   *  - Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected\r

+  *  - Fixed Mouse/Keyboard demos not performing the correct arithmetic on the Idle period at the right times (thanks to Brian Dickman)\r
+  *  - Fixed GenericHID failing HID class tests due to incorrect Logical Minimum and Logical Maximum values (thanks to Søren Greiner)\r
+  *  - Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews)\r

   *\r
   *\r
   *  \section Sec_ChangeLog090605 Version 090605\r
   *\r
   *\r
   *  \section Sec_ChangeLog090605 Version 090605\r


@@ -81,6 +96,8 @@
   *    LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preperation for the new USB class APIs\r
   *  - Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure\r
   *  - Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt\r
   *    LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preperation for the new USB class APIs\r
   *  - Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure\r
   *  - Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt\r

+  *  - Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition\r
+  *    becomes true\r

   *\r
   *\r
   *  \section Sec_ChangeLog090510 Version 090510\r
   *\r
   *\r
   *  \section Sec_ChangeLog090510 Version 090510\r