Update ModuleTest to compile for each sub-family within each architecture, to ensure...

[pub/lufa.git] / Projects / Magstripe / Magstripe.txt

diff --git a/Projects/Magstripe/Magstripe.txt b/Projects/Magstripe/Magstripe.txt
index 29258ed..34825ae 100644 (file)
--- a/Projects/Magstripe/Magstripe.txt
+++ b/Projects/Magstripe/Magstripe.txt
@@ -3,17 +3,17 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage Denver Gingerich's USBSnoop Magnetic Card Reader Project
  *
- *  \section SSec_Compat Project Compatibility:
+ *  \section Sec_Compat Project Compatibility:
  *
  *  The following list indicates what microcontrollers are compatible with this project.
  *
  *  - AT90USB1287
  *  - AT90USB1286
  *
- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:
  *
  *  The following table gives a rundown of the USB utilization of this project.
  *
@@ -26,7 +26,7 @@
  *   <td><b>USB Class:</b></td>
  *   <td>Human Interface Device (HID)</td>
  *  </tr>
- *  <tr> 
+ *  <tr>
  *   <td><b>USB Subclass:</b></td>
  *   <td>Keyboard</td>
  *  </tr>
@@ -40,18 +40,18 @@
  *  </tr>
  * </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:
  *
  *  Firmware for a USB AVR powered USB TTL magnetic stripe reader (using a card
  *  reader such as the Omron V3B-4K) by Denver Gingerich. This project is designed
  *  to be used with the open source Stripe Snoop project at <a>http://stripesnoop.sourceforge.net/</a>.
- * 
+ *
  *  See <a>http://ossguy.com/ss_usb/</a> for the USB reader hardware project website,
  *  including construction and support details.
- * 
+ *
  *  To use, connect your magnetic card reader device to the USB AVR as follows (pin and port mapping may be adjusted
  *  from the project makefile):
- * 
+ *
  *  <table>
  *   <tr>
  *    <td><b>Signal:</b></td>
@@ -87,15 +87,13 @@
  *   </tr>
  *  </table>
  *
- *  This project is based on the LUFA Keyboard projectnstration application,
- *  written by Denver Gingerich.
+ *  This project is based on the LUFA Keyboard project demonstration application, written by Denver Gingerich.
  *
- *  This application uses a keyboard HID driver to communicate the data collected
- *  a TTL magnetic stripe reader to the connected computer. The raw bitstream
- *  obtained from the magnetic stripe reader is "typed" through the keyboard
- *  driver as 0's and 1's. After every card swipe, the project will send a return key.
+ *  This application uses a keyboard HID driver to communicate the data collected a TTL magnetic stripe reader
+ *  to the connected computer. The raw bitstream obtained from the magnetic stripe reader is "typed" through
+ *  the keyboard driver as 0's and 1's. After every card swipe, the project will send a return key.
  *
- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
  *
@@ -162,3 +160,4 @@
  *   </tr>
  *  </table>
  */
+