Moved all source to the trunk directory.

[pub/lufa.git] / Projects / AVRISP_Programmer / Sample_Programming_Session.txt

diff --git a/Projects/AVRISP_Programmer/Sample_Programming_Session.txt b/Projects/AVRISP_Programmer/Sample_Programming_Session.txt
new file mode 100644 (file)
index 0000000..b5af76e
--- /dev/null
+++ b/Projects/AVRISP_Programmer/Sample_Programming_Session.txt
@@ -0,0 +1,104 @@
+ubuntu@ubuntu:~/LUFA/Bootloaders/LUFA_DFU_Bootloader_AT90USB162$  sudo avrdude -vv -F -P /dev/ttyACM0 -c avr910 -p usb162 -U flash:w:BootloaderDFU.hex\r
+\r
+avrdude: Version 5.5, compiled on May  9 2008 at 13:04:46\r
+         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/\r
+\r
+         System wide configuration file is "/etc/avrdude.conf"\r
+         User configuration file is "/home/ubuntu/.avrduderc"\r
+         User configuration file does not exist or is not a regular file, skipping\r
+\r
+         Using Port            : /dev/ttyACM0\r
+         Using Programmer      : avr910\r
+         AVR Part              : AT90USB162\r
+         Chip Erase delay      : 9000 us\r
+         PAGEL                 : PD7\r
+         BS2                   : PA0\r
+         RESET disposition     : dedicated\r
+         RETRY pulse           : SCK\r
+         serial program mode   : yes\r
+         parallel program mode : yes\r
+         Timeout               : 200\r
+         StabDelay             : 100\r
+         CmdexeDelay           : 25\r
+         SyncLoops             : 32\r
+         ByteDelay             : 0\r
+         PollIndex             : 3\r
+         PollValue             : 0x53\r
+         Memory Detail         :\r
+\r
+                                  Block Poll               Page                       Polled\r
+           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack\r
+           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------\r
+           eeprom        65    10     8    0 no        512    4      0  9000  9000 0x00 0x00\r
+           flash         65     6   128    0 yes     16384  128    128  4500  4500 0x00 0x00\r
+           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00\r
+           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00\r
+           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00\r
+           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00\r
+           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00\r
+           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00\r
+\r
+         Programmer Type : avr910\r
+         Description     : Atmel Low Cost Serial Programmer\r
+\r
+Found programmer: Id = "AVR ISP"; type = S\r
+    Software Version = 2.3; Hardware Version = 1.0\r
+Programmer supports auto addr increment.\r
+\r
+Programmer supports the following devices:\r
+    Device code: 0x55 = ATtiny12\r
+    Device code: 0x56 = ATtiny15\r
+    Device code: 0x5e = ATtiny2313\r
+    Device code: 0x76 = ATMEGA8\r
+    Device code: 0x74 = ATMEGA6450\r
+    Device code: 0x72 = ATMEGA32\r
+    Device code: 0x45 = ATMEGA64\r
+    Device code: 0x74 = ATMEGA6450\r
+    Device code: 0x43 = ATMEGA128\r
+    Device code: 0x63 = ATMEGA162\r
+    Device code: 0x78 = ATMEGA169\r
+    Device code: 0x6c = AT90S4434\r
+    Device code: 0x38 = AT90S8515\r
+    Device code: 0x65 = (unknown)\r
+\r
+avrdude: warning: selected device is not supported by programmer: usb162\r
+avrdude: AVR device initialized and ready to accept instructions\r
+\r
+Reading | ################################################## | 100% 0.00s\r
+\r
+avrdude: Device signature = 0x1e9482\r
+avrdude: safemode: lfuse reads as 5E\r
+avrdude: safemode: hfuse reads as D9\r
+avrdude: safemode: efuse reads as F4\r
+avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed\r
+         To disable this feature, specify the -D option.\r
+avrdude: erasing chip\r
+avrdude: reading input file "BootloaderDFU.hex"\r
+avrdude: input file BootloaderDFU.hex auto detected as Intel Hex\r
+avrdude: writing flash (16066 bytes):\r
+\r
+Writing | ################################################## | 100% 33.39s\r
+\r
+\r
+\r
+avrdude: 16066 bytes of flash written\r
+avrdude: verifying flash memory against BootloaderDFU.hex:\r
+avrdude: load data flash data from input file BootloaderDFU.hex:\r
+avrdude: input file BootloaderDFU.hex auto detected as Intel Hex\r
+avrdude: input file BootloaderDFU.hex contains 16066 bytes\r
+avrdude: reading on-chip flash data:\r
+\r
+Reading | ################################################## | 100% 16.07s\r
+\r
+\r
+\r
+avrdude: verifying ...\r
+avrdude: 16066 bytes of flash verified\r
+\r
+avrdude: safemode: lfuse reads as 5E\r
+avrdude: safemode: hfuse reads as D9\r
+avrdude: safemode: efuse reads as F4\r
+avrdude: safemode: Fuses OK\r
+\r
+avrdude done.  Thank you.
+