Added extra note about missing OUT endpoint configuration to the HID Device mode...

[pub/lufa.git] / Projects / AVRISP / AVRISP.txt

diff --git a/Projects/AVRISP/AVRISP.txt b/Projects/AVRISP/AVRISP.txt
index 8d299e2..a9d5507 100644 (file)
--- a/Projects/AVRISP/AVRISP.txt
+++ b/Projects/AVRISP/AVRISP.txt
@@ -66,6 +66,42 @@
  *  set to an appropriate ADC channel number in the project makefile for VTARGET detection to operate correctly. On models\r
  *  without an ADC converter, VTARGET will report at a fixed 5V level.\r
  *\r
+ *  Connections to the device are simple:\r
+ *\r
+ *  <table>\r
+ *   <tr>\r
+ *    <td><b>Programmer Pin:</b></td>\r
+ *    <td><b>Target Device Pin:</b></td>\r
+ *   </tr>\r
+ *   <tr>\r
+ *    <td>MOSI</td>\r
+ *    <td>PDI</td>\r
+ *   </tr>\r
+ *   <tr>\r
+ *    <td>MISO</td>\r
+ *    <td>PDO</td>\r
+ *   </tr>\r
+ *   <tr>\r
+ *    <td>SCLK</td>\r
+ *    <td>SCLK</td>\r
+ *   </tr>\r
+ *   <tr>\r
+ *    <td>GND</td>\r
+ *    <td>GND</td>\r
+ *   </tr>\r
+ *   <tr>\r
+ *    <td>ADCx <b><sup>1</sup></b></td>\r
+ *    <td>VTARGET</td>\r
+ *   </tr>\r
+ *   <tr>\r
+ *    <td>PORTx.y <b><sup>2</sup></b></td>\r
+ *    <td>/RESET</td>\r
+ *   </tr>\r
+ *  </table>\r
+ *\r
+ *  <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n\r
+ *  <b><sup>2</sup></b> <i>See \ref SSec_Options section</i>\r
+ *\r
  *  \section SSec_Options Project Options\r
  *\r
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.\r
@@ -89,7 +125,7 @@
  *   <tr>\r
  *    <td>RESET_LINE_MASK</td>\r
  *    <td>Makefile CDEFS</td>\r
- *    <td>Mask for the programmer's target RESET line on the chosen port.</td>\r
+ *    <td>Mask for the programmer's target RESET line on the chosen port. <b>Must not be the AVR's /SS pin.</b></td>\r
  *   </tr>\r
  *   <tr>\r
  *    <td>VTARGET_ADC_CHANNEL</td>\r