Standardized the naming scheme given to configuration descriptor sub-elements in...

[pub/lufa.git] / Projects / XPLAINBridge / XPLAINBridge.txt

diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt
index a117560..f967d3b 100644 (file)
--- a/Projects/XPLAINBridge/XPLAINBridge.txt
+++ b/Projects/XPLAINBridge/XPLAINBridge.txt
@@ -47,20 +47,21 @@
  *  \section SSec_Description Project Description: \r
  *\r
  *  This project serves a dual purpose. When loaded into the USB AVR on the XPLAIN board, it will act as either a USB to Serial\r
- *  converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or a PDI programmer for the XMEGA. This project replaces\r
- *  the firmware preloaded onto the XPLAIN's onboard AT90USB1287 microcontroller.\r
+ *  converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or an AVRStudio compaible PDI programmer for the XMEGA.\r
+ *  This project replaces the firmware preloaded onto the XPLAIN's onboard AT90USB1287 microcontroller.\r
  *\r
- *  When inserted, the JTAG port's TDI pin is read. If the pin is left high, the device will enumerate as a regular COM port on\r
- *  the host, which can then be opened and data exchanged between the XMEGA and Host as if the XMEGA was connected directly to\r
- *  the host's serial port. If the pin is pulled low, the device will enumerate as an AVRISP-MKII to the host, so that the XMEGA\r
- *  can be reprogrammed by AVRStudio or other compatible software such as avrdude.\r
+ *  When power to the board is applied, the TDI pin (pin 9) of the USB AVR's JTAG port is read. If the pin is left high, the device\r
+ *  will enumerate as a regular COM port on the host, which can then be opened and data exchanged between the XMEGA and Host as if\r
+ *  the XMEGA was connected directly to the host's serial port. If the pin is pulled low by shorting it to GND (pin 10), the device\r
+ *  will enumerate as an AVRISP-MKII to the host, so that the XMEGA can be reprogrammed by AVRStudio or other compatible software\r
+ *  such as avrdude.\r
  *\r
  *  After running this project for the first time on a new computer, you will need to supply the .INF file located in this project\r
  *  project's directory as the device's driver when running under Windows. This will enable Windows to use its inbuilt CDC drivers,\r
  *  negating the need for custom drivers for the device. Other Operating Systems should automatically use their own inbuilt CDC-ACM\r
  *  drivers.\r
  *\r
- *  This project relies on files from the LUFA AVRISP-MKII project.\r
+ *  This project relies on files from the LUFA AVRISP-MKII project for compilation.\r
  *\r
  *  \section SSec_Options Project Options\r
  *\r