Combined Mouse, MouseViaInt and MouseFullInt demos into a single unified demo.

[pub/lufa.git] / Demos / TestApp / TestApp.txt

diff --git a/Demos/TestApp/TestApp.txt b/Demos/TestApp/TestApp.txt
index e5b268a..aef55b7 100644 (file)
--- a/Demos/TestApp/TestApp.txt
+++ b/Demos/TestApp/TestApp.txt
@@ -6,25 +6,9 @@
  \r
 /** \mainpage Test Application for the LUFA library\r
  *\r
  \r
 /** \mainpage Test Application for the LUFA library\r
  *\r

- *  Test application. Demonstrates several aspects of the LUFA\r
- *  Library. On startup the current temperature will be printed\r
- *  through the USART every 10 seconds, and the current joystick\r
- *  position will be indicated via the LEDs on the selected board.\r
- *  Pressing the HWB will initiate the USB subsystem, enumerating\r
- *  the device (which has <b>no actual functionality beyond\r
- *  enumeration as a device or as a host in this demo</b>, and serves\r
- *  only to demonstrate the USB portion of the library). It will\r
- *  also suspend the joystick and temperature monitoring tasks.\r
- * \r
- *  Pressing the HWB a second time will turn off the USB system\r
- *  and resume the temperature printing task (but not the joystick\r
- *  monitoring task).\r
- *\r
- *  When activated, the USB events will be printed through the\r
- *  serial USART.\r
+ *  \section SSec_Info USB Information:\r

  *\r
  *\r

- *  When the USB subsystem is activated, the board LEDs will show\r
- *  the current USB status.\r
+ *  The following table gives a rundown of the USB utilization of this demo.\r

  *\r
  *  <table>\r
  *   <tr>\r
  *\r
  *  <table>\r
  *   <tr>\r


@@ -48,4 +32,38 @@
  *    <td>Low Speed Mode, Full Speed Mode</td>\r
  *   </tr>\r
  *  </table>\r
  *    <td>Low Speed Mode, Full Speed Mode</td>\r
  *   </tr>\r
  *  </table>\r

+ *\r
+ *  \section SSec_Description Project Description: \r
+ *\r
+ *  Test application. Demonstrates several aspects of the LUFA\r
+ *  Library. On startup the current temperature will be printed\r
+ *  through the USART every 10 seconds, and the current joystick\r
+ *  position will be indicated via the LEDs on the selected board.\r
+ *  Pressing the HWB will initiate the USB subsystem, enumerating\r
+ *  the device (which has <b>no actual functionality beyond\r
+ *  enumeration as a device or as a host in this demo</b>, and serves\r
+ *  only to demonstrate the USB portion of the library). It will\r
+ *  also suspend the joystick and temperature monitoring tasks.\r
+ * \r
+ *  Pressing the HWB a second time will turn off the USB system\r
+ *  and resume the temperature printing task (but not the joystick\r
+ *  monitoring task).\r
+ *\r
+ *  When activated, the USB events will be printed through the\r
+ *  serial USART.\r
+ *\r
+ *  When the USB subsystem is activated, the board LEDs will show\r
+ *  the current USB status.\r
+ *\r
+ *  \section SSec_Options Project Options\r
+ *\r
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.\r
+ *\r
+ *  <table>\r
+ *   <tr>\r
+ *    <td>\r
+ *     None\r
+ *    </td>\r
+ *   </tr>\r
+ *  </table>\r

  */
\ No newline at end of file
  */
\ No newline at end of file