Combined Mouse, MouseViaInt and MouseFullInt demos into a single unified demo.

[pub/lufa.git] / Bootloaders / CDC / BootloaderCDC.txt

diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt
index cb6f9f0..1f8970d 100644 (file)
--- a/Bootloaders/CDC/BootloaderCDC.txt
+++ b/Bootloaders/CDC/BootloaderCDC.txt
@@ -5,15 +5,10 @@
  */\r
  \r
 /** \mainpage CDC Class USB AVR Bootloader\r
- * \r
- * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109\r
- * protocol compatible programming software to load firmware onto the AVR.     \r
- *  \r
- * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If\r
- * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU\r
- * values in the accompanying makefile.\r
- *  \r
- * This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.\r
+ *\r
+ *  \section SSec_Info USB Information:\r
+ *\r
+ *  The following table gives a rundown of the USB utilization of this demo.\r
  *\r
  * <table>\r
  *  <tr>\r
@@ -37,4 +32,27 @@
  *   <td>Full Speed Mode</td>\r
  *  </tr>\r
  * </table>\r
- */\r
+ *\r
+ *  \section SSec_Description Project Description: \r
+ *\r
+ * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109\r
+ * protocol compatible programming software to load firmware onto the AVR.     \r
+ *  \r
+ * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If\r
+ * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU\r
+ * values in the accompanying makefile.\r
+ *  \r
+ * This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.\r
+ *\r
+ *  \section SSec_Options Project Options\r
+ *\r
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.\r
+ *\r
+ *  <table>\r
+ *   <tr>\r
+ *    <td>\r
+ *     None\r
+ *    </td>\r
+ *   </tr>\r
+ *  </table>\r
+ */
\ No newline at end of file