Upgrade doxygen configuration files to the latest version.

[pub/lufa.git] / Projects / XPLAINBridge / XPLAINBridge.txt

diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt
index 45557ef..ce9784f 100644 (file)
--- a/Projects/XPLAINBridge/XPLAINBridge.txt
+++ b/Projects/XPLAINBridge/XPLAINBridge.txt
@@ -47,13 +47,13 @@
  *  \section Sec_Description Project Description:
  *
  *  This project serves a dual purpose. When loaded into the USB AVR on the XPLAIN board, it will act as either a USB to Serial
- *  converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or an AVRStudio compatible PDI programmer for the XMEGA.
+ *  converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or an Atmel Studio compatible PDI programmer for the XMEGA.
  *  This project replaces the firmware preloaded onto the XPLAIN's onboard AT90USB1287 microcontroller.
  *
  *  When power to the board is applied, the TDI pin (pin 9) of the USB AVR's JTAG port is read. If the pin is left high, the device
  *  will enumerate as a regular COM port on the host, which can then be opened and data exchanged between the XMEGA and Host as if
  *  the XMEGA was connected directly to the host's serial port. If the pin is pulled low by shorting it to GND (pin 10), the device
- *  will enumerate as an AVRISP-MKII to the host, so that the XMEGA can be reprogrammed by AVRStudio or other compatible software
+ *  will enumerate as an AVRISP-MKII to the host, so that the XMEGA can be reprogrammed by Atmel Studio or other compatible software
  *  such as avrdude by connecting to the board as if it was an Atmel AVRISP-MKII programmer.
  *
  *  After running this project in serial bridge mode for the first time on a new computer, you will need to supply the .INF file
@@ -79,26 +79,6 @@
  *    <th><b>Description:</b></th>
  *   </tr>
  *   <tr>
- *    <td>LIBUSB_DRIVER_COMPAT</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making
- *        the code compatible with software such as avrdude (all platforms) that use the libUSB driver.
- *
- *        \note This option is incompatible with \c RESET_TOGGLES_LIBUSB_COMPAT.</td>
- *   </tr>
- *   <tr>
- *    <td>RESET_TOGGLES_LIBUSB_COMPAT</td>
- *    <td>Makefile LUFA_OPTS</td>
- *    <td>Define to make the /RESET line of the AVR toggle between Jungo and libUSB driver compatibility modes. Each time the AVR is
- *        reset externally via the reset pin, the compatibility mode will be toggled. The compatibility mode is preserved between
- *        power cycles and is not toggled via other forms of reset such as Watchdog or Brown Out.
- *
- *        When this option is enabled, all board LEDs will flash twice on startup for Jungo compatibility mode, and five times for
- *        libUSB compatibility mode.
- *
- *        \note This option is incompatible with \c LIBUSB_DRIVER_COMPAT.</td>
- *   </tr>
- *   <tr>
  *    <td>FIRMWARE_VERSION_MINOR</td>
  *    <td>AppConfig.h</td>
  *    <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible