Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new...

[pub/lufa.git] / LUFA / Drivers / USB / HighLevel / Events.h

diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h
index e8984a4..7e82ff3 100644 (file)
--- a/LUFA/Drivers/USB/HighLevel/Events.h
+++ b/LUFA/Drivers/USB/HighLevel/Events.h
@@ -188,7 +188,7 @@
                         *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
                         *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

-                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by

                         *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n
                         *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n


@@ -206,7 +206,7 @@
                         *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
                         *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

-                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by

                         *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n
                         *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n


@@ -226,7 +226,7 @@
                         *  This event is time-critical; each packet within the request transaction must be acknowledged or
                         *  sent within 50ms or the host will abort the transfer.
                         *
                         *  This event is time-critical; each packet within the request transaction must be acknowledged or
                         *  sent within 50ms or the host will abort the transfer.
                         *

-                        *  The library interally handles all standard control requests with the exceptions of SYNC FRAME,
+                        *  The library internally handles all standard control requests with the exceptions of SYNC FRAME,

                         *  SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left
                         *  for the user to process via this event if desired. If not handled in the user application, requests
                         *  are automatically STALLed.
                         *  SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left
                         *  for the user to process via this event if desired. If not handled in the user application, requests
                         *  are automatically STALLed.


@@ -307,7 +307,7 @@
                         *  millisecond timer source when the USB bus is enumerated in device mode to a USB host.
                         *
                         *  This event is time-critical; it is run once per millisecond and thus long handlers will significantly
                         *  millisecond timer source when the USB bus is enumerated in device mode to a USB host.
                         *
                         *  This event is time-critical; it is run once per millisecond and thus long handlers will significantly

-                        *  degrade device performance. This event should only be enabled when needed to reduce device wakeups.
+                        *  degrade device performance. This event should only be enabled when needed to reduce device wake-ups.

                         *
                         *  \note This event is not normally active - it must be manually enabled and disabled via the
                         *        \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration.
                         *
                         *  \note This event is not normally active - it must be manually enabled and disabled via the
                         *        \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration.