+++ /dev/null
-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2009.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, and distribute this software\r
- and its documentation for any purpose and without fee is hereby\r
- granted, provided that the above copyright notice appear in all\r
- copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- *\r
- * Target-related functions for the XMEGA target's NVM module.\r
- */\r
-\r
-#define INCLUDE_FROM_XMEGA_NVM_C\r
-#include "XMEGANVM.h"\r
-\r
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)\r
-\r
-/** Sends the given NVM register address to the target.\r
- *\r
- * \param[in] Register NVM register whose absolute address is to be sent\r
- */\r
-void XMEGANVM_SendNVMRegAddress(const uint8_t Register)\r
-{\r
- /* Determine the absolute register address from the NVM base memory address and the NVM register address */\r
- uint32_t Address = XPROG_Param_NVMBase | Register;\r
-\r
- /* Send the calculated 32-bit address to the target, LSB first */\r
- XMEGANVM_SendAddress(Address);\r
-}\r
-\r
-/** Sends the given 32-bit absolute address to the target.\r
- *\r
- * \param[in] AbsoluteAddress Absolute address to send to the target\r
- */\r
-void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress)\r
-{\r
- /* Send the given 32-bit address to the target, LSB first */\r
- XPROGTarget_SendByte(((uint8_t*)&AbsoluteAddress)[0]);\r
- XPROGTarget_SendByte(((uint8_t*)&AbsoluteAddress)[1]);\r
- XPROGTarget_SendByte(((uint8_t*)&AbsoluteAddress)[2]);\r
- XPROGTarget_SendByte(((uint8_t*)&AbsoluteAddress)[3]);\r
-}\r
-\r
-/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC\r
- * calculation.\r
- *\r
- * \return Boolean true if the NVM controller became ready within the timeout period, false otherwise\r
- */\r
-bool XMEGANVM_WaitWhileNVMBusBusy(void)\r
-{\r
- /* Poll the STATUS register to check to see if NVM access has been enabled */\r
- while (TimeoutMSRemaining)\r
- {\r
- /* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */\r
- XPROGTarget_SendByte(PDI_CMD_LDCS | PDI_STATUS_REG);\r
- if (XPROGTarget_ReceiveByte() & PDI_STATUS_NVM)\r
- return true;\r
- }\r
- \r
- return false;\r
-}\r
-\r
-/** Waits while the target's NVM controller is busy performing an operation, exiting if the\r
- * timeout period expires.\r
- *\r
- * \return Boolean true if the NVM controller became ready within the timeout period, false otherwise\r
- */\r
-bool XMEGANVM_WaitWhileNVMControllerBusy(void)\r
-{\r
- /* Poll the NVM STATUS register while the NVM controller is busy */\r
- while (TimeoutMSRemaining)\r
- {\r
- /* Send a LDS command to read the NVM STATUS register to check the BUSY flag */\r
- XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS);\r
- \r
- /* Check to see if the BUSY flag is still set */\r
- if (!(XPROGTarget_ReceiveByte() & (1 << 7)))\r
- return true;\r
- }\r
- \r
- return false;\r
-}\r
-\r
-/** Retrieves the CRC value of the given memory space.\r
- *\r
- * \param[in] CRCCommand NVM CRC command to issue to the target\r
- * \param[out] CRCDest CRC Destination when read from the target\r
- *\r
- * \return Boolean true if the command sequence complete successfully\r
- */\r
-bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)\r
-{\r
- /* Wait until the NVM controller is no longer busy */\r
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))\r
- return false;\r
- \r
- /* Set the NVM command to the correct CRC read command */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);\r
- XPROGTarget_SendByte(CRCCommand);\r
-\r
- /* Set CMDEX bit in NVM CTRLA register to start the CRC generation */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);\r
- XPROGTarget_SendByte(1 << 0);\r
-\r
- /* Wait until the NVM bus is ready again */\r
- if (!(XMEGANVM_WaitWhileNVMBusBusy()))\r
- return false;\r
-\r
- /* Wait until the NVM controller is no longer busy */\r
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))\r
- return false;\r
- \r
- uint32_t MemoryCRC = 0;\r
- \r
- /* Read the first generated CRC byte value */\r
- XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT0);\r
- MemoryCRC = XPROGTarget_ReceiveByte();\r
-\r
- /* Read the second generated CRC byte value */\r
- XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT1);\r
- MemoryCRC |= ((uint16_t)XPROGTarget_ReceiveByte() << 8);\r
-\r
- /* Read the third generated CRC byte value */\r
- XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT2);\r
- MemoryCRC |= ((uint32_t)XPROGTarget_ReceiveByte() << 16);\r
- \r
- *CRCDest = MemoryCRC;\r
- \r
- return true;\r
-}\r
-\r
-/** Reads memory from the target's memory spaces.\r
- *\r
- * \param[in] ReadAddress Start address to read from within the target's address space\r
- * \param[out] ReadBuffer Buffer to store read data into\r
- * \param[in] ReadSize Number of bytes to read\r
- *\r
- * \return Boolean true if the command sequence complete successfully\r
- */\r
-bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize)\r
-{\r
- /* Wait until the NVM controller is no longer busy */\r
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))\r
- return false;\r
- \r
- /* Send the READNVM command to the NVM controller for reading of an arbitrary location */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);\r
- XPROGTarget_SendByte(XMEGA_NVM_CMD_READNVM);\r
-\r
- /* Load the PDI pointer register with the start address we want to read from */\r
- XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);\r
- XMEGANVM_SendAddress(ReadAddress);\r
-\r
- /* Send the REPEAT command with the specified number of bytes to read */\r
- XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);\r
- XPROGTarget_SendByte(ReadSize - 1);\r
- \r
- /* Send a LD command with indirect access and postincrement to read out the bytes */\r
- XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);\r
- while (ReadSize--)\r
- *(ReadBuffer++) = XPROGTarget_ReceiveByte();\r
- \r
- return true;\r
-}\r
-\r
-/** Writes byte addressed memory to the target's memory spaces.\r
- *\r
- * \param[in] WriteCommand Command to send to the device to write each memory byte\r
- * \param[in] WriteAddress Start address to write to within the target's address space\r
- * \param[in] WriteBuffer Buffer to source data from\r
- *\r
- * \return Boolean true if the command sequence complete successfully\r
- */\r
-bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)\r
-{\r
- /* Wait until the NVM controller is no longer busy */\r
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))\r
- return false;\r
-\r
- /* Send the memory write command to the target */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);\r
- XPROGTarget_SendByte(WriteCommand);\r
- \r
- /* Send new memory byte to the memory to the target */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendAddress(WriteAddress);\r
- XPROGTarget_SendByte(*(WriteBuffer++));\r
- \r
- return true;\r
-}\r
-\r
-/** Writes page addressed memory to the target's memory spaces.\r
- *\r
- * \param[in] WriteBuffCommand Command to send to the device to write a byte to the memory page buffer\r
- * \param[in] EraseBuffCommand Command to send to the device to erase the memory page buffer\r
- * \param[in] WritePageCommand Command to send to the device to write the page buffer to the destination memory\r
- * \param[in] PageMode Bitfield indicating what operations need to be executed on the specified page\r
- * \param[in] WriteAddress Start address to write the page data to within the target's address space\r
- * \param[in] WriteBuffer Buffer to source data from\r
- * \param[in] WriteSize Number of bytes to write\r
- *\r
- * \return Boolean true if the command sequence complete successfully\r
- */\r
-bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t EraseBuffCommand,\r
- const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress,\r
- const uint8_t* WriteBuffer, uint16_t WriteSize)\r
-{\r
- if (PageMode & XPRG_PAGEMODE_ERASE)\r
- {\r
- /* Wait until the NVM controller is no longer busy */\r
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))\r
- return false;\r
-\r
- /* Send the memory buffer erase command to the target */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);\r
- XPROGTarget_SendByte(EraseBuffCommand);\r
-\r
- /* Set CMDEX bit in NVM CTRLA register to start the buffer erase */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);\r
- XPROGTarget_SendByte(1 << 0);\r
- }\r
-\r
- if (WriteSize)\r
- {\r
- /* Wait until the NVM controller is no longer busy */\r
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))\r
- return false;\r
-\r
- /* Send the memory buffer write command to the target */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);\r
- XPROGTarget_SendByte(WriteBuffCommand);\r
-\r
- /* Load the PDI pointer register with the start address we want to write to */\r
- XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);\r
- XMEGANVM_SendAddress(WriteAddress);\r
-\r
- /* Send the REPEAT command with the specified number of bytes to write */\r
- XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);\r
- XPROGTarget_SendByte(WriteSize - 1);\r
- \r
- /* Send a ST command with indirect access and postincrement to write the bytes */\r
- XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);\r
- while (WriteSize--)\r
- XPROGTarget_SendByte(*(WriteBuffer++));\r
- }\r
- \r
- if (PageMode & XPRG_PAGEMODE_WRITE)\r
- {\r
- /* Wait until the NVM controller is no longer busy */\r
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))\r
- return false;\r
-\r
- /* Send the memory write command to the target */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);\r
- XPROGTarget_SendByte(WritePageCommand);\r
- \r
- /* Send the address of the first page location to write the memory page */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendAddress(WriteAddress);\r
- XPROGTarget_SendByte(0x00);\r
- }\r
-\r
- return true;\r
-}\r
-\r
-/** Erases a specific memory space of the target.\r
- *\r
- * \param[in] EraseCommand NVM erase command to send to the device\r
- * \param[in] Address Address inside the memory space to erase\r
- *\r
- * \return Boolean true if the command sequence complete successfully\r
- */\r
-bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)\r
-{\r
- /* Wait until the NVM controller is no longer busy */\r
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))\r
- return false;\r
- \r
- /* Send the memory erase command to the target */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);\r
- XPROGTarget_SendByte(EraseCommand);\r
- \r
- /* Chip erase is handled separately, since it's procedure is different to other erase types */\r
- if (EraseCommand == XMEGA_NVM_CMD_CHIPERASE)\r
- {\r
- /* Set CMDEX bit in NVM CTRLA register to start the chip erase */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);\r
- XPROGTarget_SendByte(1 << 0); \r
- }\r
- else\r
- {\r
- /* Other erase modes just need us to address a byte within the target memory space */\r
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));\r
- XMEGANVM_SendAddress(Address); \r
- XPROGTarget_SendByte(0x00);\r
- }\r
- \r
- /* Wait until the NVM bus is ready again */\r
- if (!(XMEGANVM_WaitWhileNVMBusBusy()))\r
- return false;\r
- \r
- return true;\r
-}\r
-\r
-#endif\r
projects / pub / lufa.git / blobdiff