Add option to the USB XMEGAs to set the USB bus interrupt priority level.

[pub/lufa.git] / LUFA / ManPages / ChangeLog.txt

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 93ccce1..b46ab4d 100644 (file)
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -13,27 +13,60 @@
   *     tokens as an alternative to tokens defined in the project makefile
   *   - Added new USB_Host_SetInterfaceAltSetting() convenience function for the selection of an interface's alternative setting
   *   - Added Audio class control request definitions
   *     tokens as an alternative to tokens defined in the project makefile
   *   - Added new USB_Host_SetInterfaceAltSetting() convenience function for the selection of an interface's alternative setting
   *   - Added Audio class control request definitions

-  *   - Added new callback to the Audio Class driver to allow for endpoint control manipulations such as data sample rates
+  *   - Added new CALLBACK_Audio_Device_GetSetEndpointProperty() callback to the Audio Device Class driver to allow for endpoint control manipulations
+  *     such as data sample rates
+  *   - Added support for the Audio class GET STATUS request in the Audio Device Class driver so that it is correctly ACKed when sent by the host
+  *   - Added new EVENT_Audio_Device_StreamStartStop() event to the Audio Device Class driver to detect stream start/stop events

   *   - Added board driver support for the Busware TUL board
   *   - Added board driver support for the Busware TUL board

+  *   - Added board hardware driver support for the EVK1100 board
+  *   - Added board hardware driver support for the EVK1104 board
+  *   - Added new Host mode Audio Class driver
+  *   - Added new SPI_GetCurrentMode() function to the SPI peripheral driver
+  *   - Added RingBuffer_GetFreeCount() function to the Ring Buffer driver
+  *   - Added new HID_Host_SetIdlePeriod() function to the HID Host Class driver
+  *   - Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device
+  *   - Added new USB_Host_GetDeviceStatus() function to the host standard request function set
+  *   - Added AVR USB XMEGA architecture port (currently incomplete/experimental)
+  *   - Added new STRINGIFY() and STRINGIFY_EXPANDED() convenience macros
+  *   - Added Device Qualifier standard descriptor structure definitions USB_StdDescriptor_DeviceQualifier_t and USB_Descriptor_DeviceQualifier_t

   *  - Library Applications:
   *   - Added RNDIS device mode to the Webserver project
   *  - Library Applications:
   *   - Added RNDIS device mode to the Webserver project

-  *   - Added new MediaControl project

   *   - Added new incomplete AndroidAccessoryHost Host LowLevel demo
   *   - Added new incomplete AndroidAccessoryHost Host LowLevel demo

-  *   - Added new incomplete AudioInputHost Host LowLevel demo
-  *   - Added new incomplete AudioOutputHost Host LowLevel demo
+  *   - Added new HIDReportViewer project
+  *   - Added new MediaControl project
+  *   - Added new AudioInputHost Host ClassDriver demo
+  *   - Added new AudioOutputHost Host ClassDriver demo
+  *   - Added new AudioInputHost Host LowLevel demo
+  *   - Added new AudioOutputHost Host LowLevel demo
+  *   - Added new "checksource" target to all library project makefiles

   *
   *  <b>Changed:</b>
   *  - Core:
   *
   *  <b>Changed:</b>
   *  - Core:

-  *   - Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host

   *   - Altered the definition of the USB_Audio_Descriptor_Format_t descriptor so that the user is now responsible for supplying
   *     the supported audio sampling rates, to allow for multiple audio interfaces with different numbers of supported rates and/or
   *     continuous sample rates
   *   - Altered the definition of the USB_Audio_Descriptor_Format_t descriptor so that the user is now responsible for supplying
   *     the supported audio sampling rates, to allow for multiple audio interfaces with different numbers of supported rates and/or
   *     continuous sample rates

+  *   - Pipe_BoundEndpointNumber() has been renamed to Pipe_GetBoundEndpointAddress(), and now returns the correct endpoint direction
+  *     as part of the endpoint address
+  *   - Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to,
+  *     by changing the USB_* prefix to USB_Device_* or USB_Host_*
+  *   - Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required
+  *   - Altered the USB_Host_SetDeviceConfiguration() function to update the global Host state machine state and the new
+  *     USB_Host_ConfigurationNumber global as required
+  *   - Added endian correcting code to the library USB class drivers for multiple architecture support

   *  - Library Applications:
   *  - Library Applications:

-  *   - Modified the Class Driver AudioInput and AudioOutput demos to support multiple sample rates
+  *   - Modified the Low Level and Class Driver AudioInput and AudioOutput demos to support multiple audio sample rates
+  *   - Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration
+  *     instead of manual host state machine manipulations in the main application task

   *
   *  <b>Fixed:</b>
   *  - Core:
   *
   *  <b>Fixed:</b>
   *  - Core:

-  *   - <i>None</i>
+  *   - Large number of documentation and code comment corrections (thanks to Andrey from Microsin.ru)
+  *   - Fixed possibility of the AVR's SPI interface being pulled out of master mode if the /SS pin is a input and pulled low (thanks
+  *     to Andrey from Microsin.ru)
+  *   - Fixed compile error when FIXED_CONTROL_ENDPOINT_SIZE compile time option was disabled, and a USE_*_DESCRIPTORS compile time
+  *     option was not enabled on the AVR8s
+  *   - Fixed lack of C++ compatibility in some internal header files causing compile errors when using LUFA in C++ projects
+  *   - Fixed error in the pipe unordered allocation algorithm for the AVR8 devices breaking compatibility with some devices

   *  - Library Applications:
   *   - Fixed incorrect signature in the CDC and DFU class bootloaders for the ATMEGA8U2
   *   - Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed
   *  - Library Applications:
   *   - Fixed incorrect signature in the CDC and DFU class bootloaders for the ATMEGA8U2
   *   - Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed


@@ -122,7 +155,7 @@
   *   - Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.)
   *   - Fixed incorrect definition of the HID_KEYBOARD_SC_RIGHT_ARROW constant in the HID class driver (thanks to Joby Taffey)
   *   - Fixed incorrect endpoint initialisation order in the several device demos (thanks to Rick Drolet)
   *   - Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.)
   *   - Fixed incorrect definition of the HID_KEYBOARD_SC_RIGHT_ARROW constant in the HID class driver (thanks to Joby Taffey)
   *   - Fixed incorrect endpoint initialisation order in the several device demos (thanks to Rick Drolet)

-  *   - Fixed inverted Minimum board LEDs
+  *   - Fixed inverted Minimus board LEDs

   *   - Fixed incorrect byte ordering in the Audio_Device_WriteSample24 function (thanks to WZab)
   *   - Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect
   *     error code enum (thanks to Daniel Seibert)
   *   - Fixed incorrect byte ordering in the Audio_Device_WriteSample24 function (thanks to WZab)
   *   - Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect
   *     error code enum (thanks to Daniel Seibert)


@@ -1016,7 +1049,7 @@
   *  - Library license changed from LGPLv3 to MIT license
   *
   *
   *  - Library license changed from LGPLv3 to MIT license
   *
   *

-  *  \section Sec_ChangeLog151 Version 1.5.1 - Released 31st July, 2008
+  *  \section Sec_ChangeLog151 Version 1.5.1 - Released 7th July, 2008

   *
   *  - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event
   *    rather than the USB_DeviceAttached event
   *
   *  - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event
   *    rather than the USB_DeviceAttached event


@@ -1095,7 +1128,7 @@
   *  - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names
   *
   *
   *  - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names
   *
   *

-  *  \section Sec_ChangeLog141 Version 1.4.1 - Released 5 May, 2008
+  *  \section Sec_ChangeLog141 Version 1.4.1 - Released 19 May, 2008

   *
   *  - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo
   *  - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly
   *
   *  - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo
   *  - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly