/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage uIP Powered Webserver Project * * \section SSec_Compat Project Compatibility: * * The following list indicates what microcontrollers are compatible with this project. * * - Series 7 USB AVRs * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this project. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Dual Mode Host/Device
USB Class:Communications Device Class (CDC) \n * Mass Storage Device
USB Subclass:Remote NDIS (Microsoft Proprietary CDC Class Networking Standard) \n * Bulk-Only Transport
Relevant Standards:Microsoft RNDIS Specification \n * USBIF Mass Storage Standard \n * USB Bulk-Only Transport Standard \n * SCSI Primary Commands Specification \n * SCSI Block Commands Specification
Usable Speeds:Full Speed Mode
* * \section SSec_Description Project Description: * * Simple HTTP webserver project. This project combines the LUFA library with the uIP TCP/IP full network stack and FatFS * library to create a RNDIS host capable of serving out HTTP web pages to multiple hosts simultaneously. This project * demonstrates how the libraries can be combined into a robust network enabled application, with the addition of a RNDIS * network device. * * To use this project, plug the USB AVR into a computer, so that it enumerates as a standard Mass Storage device. Load * HTML files onto the disk, so that they can be served out to clients -- the default file to serve should be called * index.htm. Filenames must be in 8.3 format for them to be retrieved correctly by the webserver, and the total * requested file path must be equal to or less than the maximum URI length (\see \ref SSec_Options). * * When attached to a RNDIS class device, such as a USB (desktop) modem, the system will enumerate the device, set the * appropriate parameters needed for connectivity and begin listening for new HTTP connections on port 80 and TELNET * connections on port 23. The device IP, netmask and default gateway IP must be set to values appropriate for the RNDIS * device being used for this project to work if the DHCP client is disabled (see \ref SSec_Options) - otherwise, the device * will query the network's DHCP server for these parameters automatically. * * When properly configured, the webserver can be accessed from any HTTP web browser by typing in the device's statically or * dynamically allocated IP address. The TELNET client can be accessed via any network socket app by connecting to the device * on port 23 on the device's statically or dynamically allocated IP address. * * \section SSec_Options Project Options * * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Define Name:Location:Description:
ENABLE_TELNET_SERVERMakefile LUFA_OPTSWhen defined, this enables the TELNET server in addition to the HTTP webserver, which listens for incoming connections * and processes user commands.
ENABLE_DHCP_CLIENTMakefile LUFA_OPTSWhen defined, this enables the DHCP client for dynamic IP allocation of the network settings from a DHCP server.
DEVICE_IP_ADDRESSLib/uIPManagement.hIP address that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).
DEVICE_NETMASKLib/uIPManagement.hNetmask that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).
DEVICE_GATEWAYLib/uIPManagement.hDefault routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT * is not defined).
MAX_URI_LENGTHMakefile LUFA_OPTSMaximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and separators.
*/