Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2010.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6       www.fourwalledcubicle.com
   7 */
   8
   9 /*
  10   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaim all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *
  33  *  Target-related functions for the ISP Protocol decoder.
  34  */
  35
  36 #include "ISPTarget.h"
  37
  38 #if defined(ENABLE_ISP_PROTOCOL) || defined(__DOXYGEN__)
  39
  40 /** Converts the given AVR Studio SCK duration parameter (set by a SET PARAM command from the host) to the nearest
  41  *  possible SPI clock prescaler mask for passing to the SPI_Init() routine.
  42  *
  43  *  \return Nearest SPI prescaler mask for the given SCK frequency
  44  */
  45 uint8_t ISPTarget_GetSPIPrescalerMask(void)
  46 {
  47         static const uint8_t SPIMaskFromSCKDuration[] =
  48         {
  49         #if (F_CPU == 8000000)
  50                 SPI_SPEED_FCPU_DIV_2,    // AVRStudio =   8MHz SPI, Actual =   4MHz SPI
  51                 SPI_SPEED_FCPU_DIV_2,    // AVRStudio =   4MHz SPI, Actual =   4MHz SPI
  52                 SPI_SPEED_FCPU_DIV_4,    // AVRStudio =   2MHz SPI, Actual =   2MHz SPI
  53                 SPI_SPEED_FCPU_DIV_8,    // AVRStudio =   1MHz SPI, Actual =   1MHz SPI
  54                 SPI_SPEED_FCPU_DIV_16,   // AVRStudio = 500KHz SPI, Actual = 500KHz SPI
  55                 SPI_SPEED_FCPU_DIV_32,   // AVRStudio = 250KHz SPI, Actual = 250KHz SPI
  56                 SPI_SPEED_FCPU_DIV_64,   // AVRStudio = 125KHz SPI, Actual = 125KHz SPI
  57         #elif (F_CPU == 16000000)
  58                 SPI_SPEED_FCPU_DIV_2,    // AVRStudio =   8MHz SPI, Actual =   8MHz SPI
  59                 SPI_SPEED_FCPU_DIV_4,    // AVRStudio =   4MHz SPI, Actual =   4MHz SPI
  60                 SPI_SPEED_FCPU_DIV_8,    // AVRStudio =   2MHz SPI, Actual =   2MHz SPI
  61                 SPI_SPEED_FCPU_DIV_16,   // AVRStudio =   1MHz SPI, Actual =   1MHz SPI
  62                 SPI_SPEED_FCPU_DIV_32,   // AVRStudio = 500KHz SPI, Actual = 500KHz SPI
  63                 SPI_SPEED_FCPU_DIV_64,   // AVRStudio = 250KHz SPI, Actual = 250KHz SPI
  64                 SPI_SPEED_FCPU_DIV_128   // AVRStudio = 125KHz SPI, Actual = 125KHz SPI
  65         #else
  66                 #error No SPI prescaler masks for chosen F_CPU speed.
  67         #endif
  68         };
  69
  70         uint8_t SCKDuration = V2Params_GetParameterValue(PARAM_SCK_DURATION);
  71
  72         if (SCKDuration >= sizeof(SPIMaskFromSCKDuration))
  73           SCKDuration = (sizeof(SPIMaskFromSCKDuration) - 1);
  74
  75         return SPIMaskFromSCKDuration[SCKDuration];
  76 }
  77
  78 /** Asserts or deasserts the target's reset line, using the correct polarity as set by the host using a SET PARAM command.
  79  *  When not asserted, the line is tristated so as not to interfere with normal device operation.
  80  *
  81  *  \param[in] ResetTarget Boolean true when the target should be held in reset, false otherwise
  82  */
  83 void ISPTarget_ChangeTargetResetLine(const bool ResetTarget)
  84 {
  85         if (ResetTarget)
  86         {
  87                 AUX_LINE_DDR |= AUX_LINE_MASK;
  88
  89                 if (!(V2Params_GetParameterValue(PARAM_RESET_POLARITY)))
  90                   AUX_LINE_PORT |= AUX_LINE_MASK;
  91         }
  92         else
  93         {
  94                 AUX_LINE_DDR  &= ~AUX_LINE_MASK;
  95                 AUX_LINE_PORT &= ~AUX_LINE_MASK;
  96         }
  97 }
  98
  99 /** Waits until the last issued target memory programming command has completed, via the check mode given and using
 100  *  the given parameters.
 101  *
 102  *  \param[in] ProgrammingMode  Programming mode used and completion check to use, a mask of PROG_MODE_* constants
 103  *  \param[in] PollAddress  Memory address to poll for completion if polling check mode used
 104  *  \param[in] PollValue  Poll value to check against if polling check mode used
 105  *  \param[in] DelayMS  Milliseconds to delay before returning if delay check mode used
 106  *  \param[in] ReadMemCommand  Device low-level READ MEMORY command to send if value check mode used
 107  *
 108  *  \return V2 Protocol status \ref STATUS_CMD_OK if the no timeout occurred, \ref STATUS_RDY_BSY_TOUT or
 109  *          \ref STATUS_CMD_TOUT otherwise
 110  */
 111 uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode, const uint16_t PollAddress, const uint8_t PollValue,
 112                                       const uint8_t DelayMS, const uint8_t ReadMemCommand)
 113 {
 114         uint8_t ProgrammingStatus  = STATUS_CMD_OK;
 115
 116         /* Determine method of Programming Complete check */
 117         switch (ProgrammingMode & ~(PROG_MODE_PAGED_WRITES_MASK | PROG_MODE_COMMIT_PAGE_MASK))
 118         {
 119                 case PROG_MODE_WORD_TIMEDELAY_MASK:
 120                 case PROG_MODE_PAGED_TIMEDELAY_MASK:
 121                         ISPProtocol_DelayMS(DelayMS);
 122                         break;
 123                 case PROG_MODE_WORD_VALUE_MASK:
 124                 case PROG_MODE_PAGED_VALUE_MASK:
 125                         do
 126                         {
 127                                 SPI_SendByte(ReadMemCommand);
 128                                 SPI_SendByte(PollAddress >> 8);
 129                                 SPI_SendByte(PollAddress & 0xFF);
 130                         }
 131                         while ((SPI_TransferByte(0x00) == PollValue) && TimeoutMSRemaining);
 132
 133                         if (!(TimeoutMSRemaining))
 134                          ProgrammingStatus = STATUS_CMD_TOUT;
 135
 136                         break;
 137                 case PROG_MODE_WORD_READYBUSY_MASK:
 138                 case PROG_MODE_PAGED_READYBUSY_MASK:
 139                         ProgrammingStatus = ISPTarget_WaitWhileTargetBusy();
 140                         break;
 141         }
 142
 143         if (ProgrammingStatus == STATUS_CMD_OK)
 144           TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
 145
 146         return ProgrammingStatus;
 147 }
 148
 149 /** Waits until the target has completed the last operation, by continuously polling the device's
 150  *  BUSY flag until it is cleared, or until the command timeout period has expired.
 151  *
 152  *  \return V2 Protocol status \ref STATUS_CMD_OK if the no timeout occurred, \ref STATUS_RDY_BSY_TOUT otherwise
 153  */
 154 uint8_t ISPTarget_WaitWhileTargetBusy(void)
 155 {
 156         do
 157         {
 158                 SPI_SendByte(0xF0);
 159                 SPI_SendByte(0x00);
 160                 SPI_SendByte(0x00);
 161         }
 162         while ((SPI_ReceiveByte() & 0x01) && TimeoutMSRemaining);
 163
 164         if (TimeoutMSRemaining)
 165         {
 166                 TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
 167                 return STATUS_CMD_OK;
 168         }
 169         else
 170         {
 171                 return STATUS_RDY_BSY_TOUT;
 172         }
 173 }
 174
 175 /** Sends a low-level LOAD EXTENDED ADDRESS command to the target, for addressing of memory beyond the
 176  *  64KB boundary. This sends the command with the correct address as indicated by the current address
 177  *  pointer variable set by the host when a SET ADDRESS command is issued.
 178  */
 179 void ISPTarget_LoadExtendedAddress(void)
 180 {
 181         SPI_SendByte(LOAD_EXTENDED_ADDRESS_CMD);
 182         SPI_SendByte(0x00);
 183         SPI_SendByte((CurrentAddress & 0x00FF0000) >> 16);
 184         SPI_SendByte(0x00);
 185 }
 186
 187 #endif