add additional USBasp-Commands

[pub/USBaspLoader.git] / firmware / Makefile

diff --git a/firmware/Makefile b/firmware/Makefile
index 01f5307..36b9cae 100644 (file)
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -2,6 +2,8 @@
 # Project: USBaspLoader
 # Author: Christian Starkjohann
 # Creation Date: 2007-12-10
+# Author: Stephan Bärwolf
+# Improvement Date: 2012-07-31
 # Tabsize: 4
 # Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
 # License: GNU GPL v2 (see License.txt)
@@ -15,15 +17,23 @@
 
 F_CPU = 16000000
 DEVICE = atmega8
+
 # BOOTLOADER_ADDRESS is 1800 for 8k devices, 3800 for 16k and 7800 for 32k.
 BOOTLOADER_ADDRESS = 1800
-FUSEOPT = $(FUSEOPT_8)
-LOCKOPT = -U lock:w:0x2f:m
 
-PROGRAMMER = -c pony-stk200
 # PROGRAMMER contains AVRDUDE options to address your programmer
+# PROGRAMMER = -c pony-stk200
+PROGRAMMER = -c usbasp
+
+#  since USBaspLoader supports HAVE_BLB11_SOFTW_LOCKBIT...
+LOCKOPT = -U lock:w:0x3f:m
+FUSEOPT = $(FUSEOPT_8)
+
+
+# standard atmega8 needs BODLEVEL to be programed, since it is a 5V device
+# you may also want to UNprogram  SUT1 to get a SLOWER bootup (lfuse then would be 0x3f)
+FUSEOPT_8 = -U hfuse:w:0xc0:m -U lfuse:w:0x1f:m
 
-FUSEOPT_8 = -U hfuse:w:0xc0:m -U lfuse:w:0x9f:m
 FUSEOPT_88 = -U hfuse:w:0xd6:m -U lfuse:w:0xdf:m -U efuse:w:0x00:m
 FUSEOPT_168 = -U hfuse:w:0xd6:m -U lfuse:w:0xdf:m -U efuse:w:0x00:m
 FUSEOPT_328 = -U lfuse:w:0xf7:m -U hfuse:w:0xda:m -U efuse:w:0x03:m
@@ -113,6 +123,9 @@ OBJECTS =  usbdrv/usbdrvasm.o usbdrv/oddebug.o main.o
 # symbolic targets:
 all: main.hex
 
+install: main.hex
+       cp -Rvp main.hex ./hexfiles/usbasploader.hex
+
 .c.o:
        $(CC) $(CFLAGS) -c $< -o $@