extend "spminterface.h" for support of multiple ATmegas

[pub/USBaspLoader.git] / firmware / bootloaderconfig.h

diff --git a/firmware/bootloaderconfig.h b/firmware/bootloaderconfig.h
index 32b6654..97311dd 100644 (file)
--- a/firmware/bootloaderconfig.h
+++ b/firmware/bootloaderconfig.h
@@ -93,34 +93,15 @@ these macros are defined, the boot loader usees them.
  * to erase itself from the bootregion
  */
 
-#define HAVE_DOSPM_TUNNELCMD       1
+#define HAVE_SPMINTEREFACE         1
 /*
- * When enabled, "HAVE_DOSPM_TUNNELCMD" will implement an PROGMEM ARRAY 
- * with up to 15 opcodes within BLS.
- * This array will be called "bootloader__do_spm", and implements the 
- * "do_spm" subroutine from atmels "Instruction Set Manual" Rev.0856I, page 140.
- * 
-do_spm:
-;input:        spmcrval determines SPM action
-;disable interrupts if enabled, store status
-;temp1 will be register:       r7
-;temp2 will be register:       r8
-;spmcrval will be register:    r9
-
-in     temp2, SREG     ; --> has to be done before calling
-cli                    ; --> has to be done before calling
-                       ;check for previous SPM complete
-wait:
-in     temp1, SPMCR
-sbrc   temp1, SPMEN
-rjmp   wait
-                       ;SPM timed sequence
-out    SPMCR, spmcrval
-spm
-                       ;restore SREG (to enable interrupts if originally enabled)
-out    SREG, temp2
-ret
- * 
+ * Since code within normal section of application memory (rww-section) is
+ * not able to call spm for programming flash-pages, this option (when
+ * enabled) will insert a small subroutine into the bootloader-section
+ * to enable applications to circumvent this limitation and make them
+ * able to program the flash in a similar way as the bootloader does, too.
+ * For further details see "spminterface.h", which implements this 
+ * feature.
  */
 
 #define HAVE_EEPROM_PAGED_ACCESS    1
@@ -184,7 +165,8 @@ ret
 
 static inline void  bootLoaderInit(void)
 {
-    PORTD |= (1 << JUMPER_BIT);     /* activate pull-up */
+    DDRD   = 0;
+    PORTD  = (1 << JUMPER_BIT);     /* activate pull-up */
 //     deactivated by Stephan - reset after each avrdude op is annoing!
 //     if(!(MCUCSR & (1 << EXTRF)))    /* If this was not an external reset, ignore */
 //         leaveBootloader();