USBaspLoader ninth and a half stable release v0.95

[pub/USBaspLoader.git] / firmware / spminterface.h

diff --git a/firmware/spminterface.h b/firmware/spminterface.h
index 1b96e20..8026aca 100644 (file)
--- a/firmware/spminterface.h
+++ b/firmware/spminterface.h
@@ -4,7 +4,7 @@
  * Creation Date: 2012-08-01
  * Copyright: (c) 2012 by Stephan Baerwolf
  * License: GNU GPL v2 (see License.txt)
  * Creation Date: 2012-08-01
  * Copyright: (c) 2012 by Stephan Baerwolf
  * License: GNU GPL v2 (see License.txt)

- * Version: 0.8
+ * Version: 0.95

  */
 
 #ifndef SPMINTERFACE_H_f70ba6adf7624275947e859bdbff0599
  */
 
 #ifndef SPMINTERFACE_H_f70ba6adf7624275947e859bdbff0599


@@ -37,6 +37,9 @@ bootloader__do_spm:
 ;you may also want to disable wdt, since this routine may busy-loop
 ;==================================================================
 ;-->INPUT:
 ;you may also want to disable wdt, since this routine may busy-loop
 ;==================================================================
 ;-->INPUT:

+;#if HAVE_SPMINTEREFACE_MAGICVALUE
+;magicvalue in                                    r23:r22:r21:r20
+;#endif

 ;spmcr (spmcrval determines SPM action) will be register:      r18
 ;MCU dependend RA(MPZ should be transfered within register:    r11
 ;lo8(Z) should be transfered within register:                  r12
 ;spmcr (spmcrval determines SPM action) will be register:      r18
 ;MCU dependend RA(MPZ should be transfered within register:    r11
 ;lo8(Z) should be transfered within register:                  r12


@@ -55,7 +58,7 @@ bootloader__do_spm:
 ;==================================================================
 ; TODO: waitA and waitB could be merged to subroutine saving 2 opc
 ;==================================================================
 ;==================================================================
 ; TODO: waitA and waitB could be merged to subroutine saving 2 opc
 ;==================================================================

-
+;<magicvalue specific code (not depicted here)>

 ;load pageaddress (Z) from (r11:)r13:12 since it may was used for icall
 mov    rampZ,  r11
 mov    r30,    r12
 ;load pageaddress (Z) from (r11:)r13:12 since it may was used for icall
 mov    rampZ,  r11
 mov    r30,    r12


@@ -86,6 +89,7 @@ ret
 */ 
 
 #include <avr/io.h>
 */ 
 
 #include <avr/io.h>

+#include "bootloaderconfig.h"

 
 
 
 
 
 


@@ -108,7 +112,24 @@ ret
   #else
     #if defined (__AVR_ATmega8__) || defined (__AVR_ATmega8A__) || defined (__AVR_ATmega8HVA__)
       #define  funcaddr___bootloader__do_spm 0x1826
   #else
     #if defined (__AVR_ATmega8__) || defined (__AVR_ATmega8A__) || defined (__AVR_ATmega8HVA__)
       #define  funcaddr___bootloader__do_spm 0x1826

-      
+    #elif defined (__AVR_ATmega32__)
+      #define  funcaddr___bootloader__do_spm 0x7054
+    #elif defined (__AVR_ATmega88__) || defined (__AVR_ATmega88P__) || defined (__AVR_ATmega88A__) || defined (__AVR_ATmega88PA__)  
+      #define  funcaddr___bootloader__do_spm 0x1834
+    #elif defined (__AVR_ATmega164A__) || defined (__AVR_ATmega164P__) || defined (__AVR_ATmega164PA__)  
+      #define  funcaddr___bootloader__do_spm 0x387c
+    #elif defined (__AVR_ATmega168__) || defined (__AVR_ATmega168P__) || defined (__AVR_ATmega168A__) || defined (__AVR_ATmega168PA__)  
+      #define  funcaddr___bootloader__do_spm 0x3868
+    #elif defined (__AVR_ATmega324A__) || defined (__AVR_ATmega324P__) || defined (__AVR_ATmega324PA__)
+      #define  funcaddr___bootloader__do_spm 0x707c
+    #elif defined (__AVR_ATmega328__) || defined (__AVR_ATmega328P__)
+      #define  funcaddr___bootloader__do_spm 0x7068
+    #elif defined (__AVR_ATmega644__) || defined (__AVR_ATmega644A__) || defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644PA__)
+      #define  funcaddr___bootloader__do_spm 0xe07c
+    #elif defined (__AVR_ATmega128__)
+      #define  funcaddr___bootloader__do_spm 0x1e08c
+    #elif defined (__AVR_ATmega1284__) || defined (__AVR_ATmega1284P__)
+      #define  funcaddr___bootloader__do_spm 0x1e08c

     #else
       #error "unknown MCU - where is bootloader__do_spm located?"
     #endif
     #else
       #error "unknown MCU - where is bootloader__do_spm located?"
     #endif


@@ -116,6 +137,10 @@ ret
 #endif
 
 
 #endif
 
 

+#ifndef SPMEN
+#define SPMEN SELFPRGEN
+#endif
+

 /*
  * Call the "bootloader__do_spm"-function, located within the BLS via comfortable C-interface
  * During operation code will block - disable or reset watchdog before call.
 /*
  * Call the "bootloader__do_spm"-function, located within the BLS via comfortable C-interface
  * During operation code will block - disable or reset watchdog before call.


@@ -129,7 +154,13 @@ ret
  * REMEMBER: interrupts have to be disabled! (otherwise code may crash non-deterministic)
  * 
  */
  * REMEMBER: interrupts have to be disabled! (otherwise code may crash non-deterministic)
  * 
  */

-#define __do_spm_Ex(flash_wordaddress, spmcrval, dataword, ___bootloader__do_spm__ptr)         \
+#if HAVE_SPMINTEREFACE_MAGICVALUE
+#define __do_spm_Ex    __do_spm_Ex_magic
+#else
+#define __do_spm_Ex    __do_spm_Ex_
+#endif
+  
+#define __do_spm_Ex_(flash_wordaddress, spmcrval, dataword, ___bootloader__do_spm__ptr)        \

 ({                                                                                             \
     asm volatile (                                                                             \
     "push r0\n\t"                                                                              \
 ({                                                                                             \
     asm volatile (                                                                             \
     "push r0\n\t"                                                                              \


@@ -147,17 +178,82 @@ ret
     "mov r0, %A[data]\n\t"                                                                     \
                                                                                                \
     /* finally call the bootloader-function */                                                 \
     "mov r0, %A[data]\n\t"                                                                     \
                                                                                                \
     /* finally call the bootloader-function */                                                 \

-    "icall\n\r"                                                                                        \
+    "icall\n\t"                                                                                        \
+                                                                                               \
+    /*                                                                                         \
+     * bootloader__do_spm should change spmcrval (r18) to                                      \
+     * "((1<<RWWSRE) | (1<<SPMEN))" in case of success                                         \
+     */                                                                                                \
+    "cpi r18, %[spmret]\n\t"                                                                   \
+     /* loop infitinte if not so, most likely we called an bootloader__do_spm                  \
+      * with wrong magic! To avoid calls to wrong initialized pages, better crash here...    \
+      */                                                                                       \
+"loop%=: \n\t"                                                                                 \
+    "brne loop%= \n\t"                                                                         \

                                                                                                \
     "pop  r1\n\t"                                                                              \
     "pop  r0\n\t"                                                                              \
                                                                                                \
     :                                                                                          \
     : [flashaddress] "r" (flash_wordaddress),                                                  \
                                                                                                \
     "pop  r1\n\t"                                                                              \
     "pop  r0\n\t"                                                                              \
                                                                                                \
     :                                                                                          \
     : [flashaddress] "r" (flash_wordaddress),                                                  \

-      [spmfunctionaddress] "z" (___bootloader__do_spm__ptr),                                   \
+      [spmfunctionaddress] "z" ((uint16_t)(___bootloader__do_spm__ptr)),                       \

       [spmcrval] "r" (spmcrval),                                                               \
       [spmcrval] "r" (spmcrval),                                                               \

-      [data] "r" (dataword)                                                                    \
-    : "r0","r1","r11","r12","r13","r18"                                                                \
+      [data] "r" (dataword),                                                                   \
+      [spmret] "M" ((1<<RWWSRE) | (1<<SPMEN))                                                  \
+    : "r0","r1","r11","r12","r13","r18"                                                        \
+    );                                                                                         \
+})
+
+#define __do_spm_Ex_magic(flash_wordaddress, spmcrval, dataword, ___bootloader__do_spm__ptr)   \
+({                                                                                             \
+    asm volatile (                                                                             \
+    "push r0\n\t"                                                                              \
+    "push r1\n\t"                                                                              \
+                                                                                               \
+    "ldi r23, %[magicD] \n\t"                                                                  \
+    "ldi r22, %[magicC] \n\t"                                                                  \
+    "ldi r21, %[magicB] \n\t"                                                                  \
+    "ldi r20, %[magicA] \n\t"                                                                  \
+                                                                                               \
+    "mov r13, %B[flashaddress]\n\t"                                                            \
+    "mov r12, %A[flashaddress]\n\t"                                                            \
+    "mov r11, %C[flashaddress]\n\t"                                                            \
+                                                                                               \
+    /* also load the spmcrval */                                                               \
+    "mov r18, %[spmcrval]\n\t"                                                                 \
+                                                                                               \
+                                                                                               \
+    "mov r1, %B[data]\n\t"                                                                     \
+    "mov r0, %A[data]\n\t"                                                                     \
+                                                                                               \
+    /* finally call the bootloader-function */                                                 \
+    "icall\n\t"                                                                                        \
+                                                                                               \
+    /*                                                                                         \
+     * bootloader__do_spm should change spmcrval (r18) to                                      \
+     * "((1<<RWWSRE) | (1<<SPMEN))" in case of success                                         \
+     */                                                                                                \
+    "cpi r18, %[spmret]\n\t"                                                                   \
+     /* loop infitinte if not so, most likely we called an bootloader__do_spm                  \
+      * with wrong magic! To avoid calls to wrong initialized pages, better crash here...    \
+      */                                                                                       \
+"loop%=: \n\t"                                                                                 \
+    "brne loop%= \n\t"                                                                         \
+                                                                                               \
+    "pop  r1\n\t"                                                                              \
+    "pop  r0\n\t"                                                                              \
+                                                                                               \
+    :                                                                                          \
+    : [flashaddress] "r" (flash_wordaddress),                                                  \
+      [spmfunctionaddress] "z" ((uint16_t)(___bootloader__do_spm__ptr)),                       \
+      [spmcrval] "r" (spmcrval),                                                               \
+      [data] "r" (dataword),                                                                   \
+      [spmret] "M" ((1<<RWWSRE) | (1<<SPMEN)),                                                 \
+      [magicD] "M" ((HAVE_SPMINTEREFACE_MAGICVALUE>>24)&0xff),                         \
+      [magicC] "M" ((HAVE_SPMINTEREFACE_MAGICVALUE>>16)&0xff),                         \
+      [magicB] "M" ((HAVE_SPMINTEREFACE_MAGICVALUE>> 8)&0xff),                         \
+      [magicA] "M" ((HAVE_SPMINTEREFACE_MAGICVALUE>> 0)&0xff)                                  \
+    : "r0","r1","r11","r12","r13","r18","r20","r21","r22","r23"                                \

     );                                                                                         \
 })
 
     );                                                                                         \
 })
 


@@ -168,8 +264,11 @@ void do_spm(const uint32_t flash_byteaddress, const uint8_t spmcrval, const uint
 }
 #endif
 
 }
 #endif
 

-
-#include "bootloaderconfig.h"
+#if HAVE_SPMINTEREFACE_NORETMAGIC
+  #define bootloader__do_spm_magic_exitstrategy(a) (0xf7f9)
+#else
+  #define bootloader__do_spm_magic_exitstrategy(a) (a)
+#endif

 
 #if (HAVE_SPMINTEREFACE) && (defined(BOOTLOADER_ADDRESS)) && (!(defined(NEW_BOOTLOADER_ADDRESS)))
 
 
 #if (HAVE_SPMINTEREFACE) && (defined(BOOTLOADER_ADDRESS)) && (!(defined(NEW_BOOTLOADER_ADDRESS)))
 


@@ -179,17 +278,40 @@ void do_spm(const uint32_t flash_byteaddress, const uint8_t spmcrval, const uint
  * try to make this array as big as possible
  * (so bootloader always uses 2kbytes flash)
  */
  * try to make this array as big as possible
  * (so bootloader always uses 2kbytes flash)
  */

-#if defined (__AVR_ATmega8__) || defined (__AVR_ATmega8A__) || defined (__AVR_ATmega8HVA__)
+#if defined (__AVR_ATmega8__) || defined (__AVR_ATmega8A__) || defined (__AVR_ATmega8HVA__) || defined (__AVR_ATmega32__)

 
 

-#if (BOOTLOADER_ADDRESS != 0x1800)
-  #error BOOTLOADER_ADDRESS!=0x1800, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+#if defined (__AVR_ATmega8__) || defined (__AVR_ATmega8A__) || defined (__AVR_ATmega8HVA__)
+  #if (BOOTLOADER_ADDRESS != 0x1800)
+    #error BOOTLOADER_ADDRESS!=0x1800, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#elif defined (__AVR_ATmega32__)
+  #if (BOOTLOADER_ADDRESS != 0x7000)
+    #error BOOTLOADER_ADDRESS!=0x7000, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#else
+  #error undefined device selection - this should not happen! 

 #endif
 #endif

+

 //assume  SPMCR==0x37, SPMEN==0x0, RWWSRE=0x4, RWWSB=0x6
 //assume  SPMCR==0x37, SPMEN==0x0, RWWSRE=0x4, RWWSB=0x6

-const uint16_t bootloader__do_spm[17] BOOTLIBLINK = {0x0000, 0x2dec, 0x2dfd, 0xb6b7, 0xfcb0, 0xcffd, 0xbf27, 0x95e8, 0xb6b7,
-                                                    0xfcb0, 0xcffd, 0xe121, 0xb6b7, 0xfcb6, 0xcff4, 0x9508, 0xFFFF};
+#if HAVE_SPMINTEREFACE_MAGICVALUE
+const uint16_t bootloader__do_spm[23] BOOTLIBLINK = {
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 28) & 0xf))<<8) | (0x70 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 24) & 0xf))), // r23
+  bootloader__do_spm_magic_exitstrategy(0xf4a1), // brne +20
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 20) & 0xf))<<8) | (0x60 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 16) & 0xf))), // r22
+  bootloader__do_spm_magic_exitstrategy(0xf491), // brne +18
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 12) & 0xf))<<8) | (0x50 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  8) & 0xf))), // r21
+  bootloader__do_spm_magic_exitstrategy(0xf481), // brne +16
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  4) & 0xf))<<8) | (0x40 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  0) & 0xf))), // r20
+  bootloader__do_spm_magic_exitstrategy(0xf471), // brne +14
+#else
+const uint16_t bootloader__do_spm[15] BOOTLIBLINK = {
+#endif
+  0x2dec, 0x2dfd, 0xb6b7, 0xfcb0, 0xcffd, 0xbf27, 0x95e8, 0xb6b7,
+  0xfcb0, 0xcffd, 0xe121, 0xb6b7, 0xfcb6, 0xcff4, 0x9508
+};
+

 /*
 00001826 <bootloader__do_spm>:
 /*
 00001826 <bootloader__do_spm>:

-    1826:      00 00           nop

     1828:      ec 2d           mov     r30, r12
     182a:      fd 2d           mov     r31, r13
 
     1828:      ec 2d           mov     r30, r12
     182a:      fd 2d           mov     r31, r13
 


@@ -216,12 +338,38 @@ const uint16_t bootloader__do_spm[17] BOOTLIBLINK = {0x0000, 0x2dec, 0x2dfd, 0xb
 
 
 #elif defined (__AVR_ATmega48__) || defined (__AVR_ATmega48P__) || defined (__AVR_ATmega88__) || defined (__AVR_ATmega88P__) || defined (__AVR_ATmega168__) || defined (__AVR_ATmega168P__)
 
 
 #elif defined (__AVR_ATmega48__) || defined (__AVR_ATmega48P__) || defined (__AVR_ATmega88__) || defined (__AVR_ATmega88P__) || defined (__AVR_ATmega168__) || defined (__AVR_ATmega168P__)

+
+#if defined (__AVR_ATmega88__) || defined (__AVR_ATmega88P__)
+  #if (BOOTLOADER_ADDRESS != 0x1800)
+    #error BOOTLOADER_ADDRESS!=0x1800, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#elif defined (__AVR_ATmega168__) || defined (__AVR_ATmega168P__)
+  #if (BOOTLOADER_ADDRESS != 0x3800)
+    #error BOOTLOADER_ADDRESS!=0x3800, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#else
+  #error undefined device selection - this should not happen! 
+#endif
+

 //assume  SPMCR:=SPMCSR==0x37, SPMEN:=SELFPRGEN==0x0, RWWSRE=0x4, RWWSB=0x6
 //assume  SPMCR:=SPMCSR==0x37, SPMEN:=SELFPRGEN==0x0, RWWSRE=0x4, RWWSB=0x6

-const uint16_t bootloader__do_spm[17] BOOTLIBLINK = {0x0000, 0x2dec, 0x2dfd, 0xb6b7, 0xfcb0, 0xcffd, 0xbf27, 0x95e8, 0xb6b7,
-                                                    0xfcb0, 0xcffd, 0xe121, 0xb6b7, 0xfcb6, 0xcff4, 0x9508, 0xFFFF};
+#if HAVE_SPMINTEREFACE_MAGICVALUE
+const uint16_t bootloader__do_spm[23] BOOTLIBLINK = {
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 28) & 0xf))<<8) | (0x70 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 24) & 0xf))), // r23
+  bootloader__do_spm_magic_exitstrategy(0xf4a1), // brne +20
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 20) & 0xf))<<8) | (0x60 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 16) & 0xf))), // r22
+  bootloader__do_spm_magic_exitstrategy(0xf491), // brne +18
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 12) & 0xf))<<8) | (0x50 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  8) & 0xf))), // r21
+  bootloader__do_spm_magic_exitstrategy(0xf481), // brne +16
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  4) & 0xf))<<8) | (0x40 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  0) & 0xf))), // r20
+  bootloader__do_spm_magic_exitstrategy(0xf471), // brne +14
+#else
+const uint16_t bootloader__do_spm[15] BOOTLIBLINK = {
+#endif
+  0x2dec, 0x2dfd, 0xb6b7, 0xfcb0, 0xcffd, 0xbf27, 0x95e8, 0xb6b7,
+  0xfcb0, 0xcffd, 0xe121, 0xb6b7, 0xfcb6, 0xcff4, 0x9508
+};

 /*
 00001826 <bootloader__do_spm>:
 /*
 00001826 <bootloader__do_spm>:

-    1826:      00 00           nop

     1828:      ec 2d           mov     r30, r12
     182a:      fd 2d           mov     r31, r13
 
     1828:      ec 2d           mov     r30, r12
     182a:      fd 2d           mov     r31, r13
 


@@ -248,12 +396,42 @@ const uint16_t bootloader__do_spm[17] BOOTLIBLINK = {0x0000, 0x2dec, 0x2dfd, 0xb
 
 
 #elif defined (__AVR_ATmega48A__) || defined (__AVR_ATmega48PA__) || defined (__AVR_ATmega88A__) || defined (__AVR_ATmega88PA__) || defined (__AVR_ATmega168A__) || defined (__AVR_ATmega168PA__) || defined (__AVR_ATmega328__) || defined (__AVR_ATmega328P__)
 
 
 #elif defined (__AVR_ATmega48A__) || defined (__AVR_ATmega48PA__) || defined (__AVR_ATmega88A__) || defined (__AVR_ATmega88PA__) || defined (__AVR_ATmega168A__) || defined (__AVR_ATmega168PA__) || defined (__AVR_ATmega328__) || defined (__AVR_ATmega328P__)

+
+#if defined (__AVR_ATmega88A__) || defined (__AVR_ATmega88PA__)
+  #if (BOOTLOADER_ADDRESS != 0x1800)
+    #error BOOTLOADER_ADDRESS!=0x1800, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#elif defined (__AVR_ATmega168A__) || defined (__AVR_ATmega168PA__)
+  #if (BOOTLOADER_ADDRESS != 0x3800)
+    #error BOOTLOADER_ADDRESS!=0x3800, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#elif defined (__AVR_ATmega328__) || defined (__AVR_ATmega328P__)
+  #if (BOOTLOADER_ADDRESS != 0x7000)
+    #error BOOTLOADER_ADDRESS!=0x7000, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#else
+  #error undefined device selection - this should not happen! 
+#endif
+

 //assume  SPMCR:=SPMCSR==0x37, SPMEN:=SELFPRGEN==0x0, RWWSRE=0x4, RWWSB=0x6
 //assume  SPMCR:=SPMCSR==0x37, SPMEN:=SELFPRGEN==0x0, RWWSRE=0x4, RWWSB=0x6

-const uint16_t bootloader__do_spm[17] BOOTLIBLINK = {0x0000, 0x2dec, 0x2dfd, 0xb6b7, 0xfcb0, 0xcffd, 0xbf27, 0x95e8, 0xb6b7,
-                                                    0xfcb0, 0xcffd, 0xe121, 0xb6b7, 0xfcb6, 0xcff4, 0x9508, 0xFFFF};
+#if HAVE_SPMINTEREFACE_MAGICVALUE
+const uint16_t bootloader__do_spm[23] BOOTLIBLINK = {
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 28) & 0xf))<<8) | (0x70 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 24) & 0xf))), // r23
+  bootloader__do_spm_magic_exitstrategy(0xf4a1), // brne +20
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 20) & 0xf))<<8) | (0x60 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 16) & 0xf))), // r22
+  bootloader__do_spm_magic_exitstrategy(0xf491), // brne +18
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 12) & 0xf))<<8) | (0x50 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  8) & 0xf))), // r21
+  bootloader__do_spm_magic_exitstrategy(0xf481), // brne +16
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  4) & 0xf))<<8) | (0x40 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  0) & 0xf))), // r20
+  bootloader__do_spm_magic_exitstrategy(0xf471), // brne +14
+#else
+const uint16_t bootloader__do_spm[15] BOOTLIBLINK = {
+#endif
+  0x2dec, 0x2dfd, 0xb6b7, 0xfcb0, 0xcffd, 0xbf27, 0x95e8, 0xb6b7,
+  0xfcb0, 0xcffd, 0xe121, 0xb6b7, 0xfcb6, 0xcff4, 0x9508
+};

 /*
 00001826 <bootloader__do_spm>:
 /*
 00001826 <bootloader__do_spm>:

-    1826:      00 00           nop

     1828:      ec 2d           mov     r30, r12
     182a:      fd 2d           mov     r31, r13
 
     1828:      ec 2d           mov     r30, r12
     182a:      fd 2d           mov     r31, r13
 


@@ -279,10 +457,102 @@ const uint16_t bootloader__do_spm[17] BOOTLIBLINK = {0x0000, 0x2dec, 0x2dfd, 0xb
 
 
 
 
 
 

-#elif defined (__AVR_ATmega164A__) || defined (__AVR_ATmega164PA__) || defined (__AVR_ATmega324A__) || defined (__AVR_ATmega324PA__) || defined (__AVR_ATmega644A__) || defined (__AVR_ATmega644PA__) || defined (__AVR_ATmega1284__) || defined (__AVR_ATmega1284P__)
+#elif defined (__AVR_ATmega128__)
+
+#if defined (__AVR_ATmega128__)
+  #if (BOOTLOADER_ADDRESS != 0x1E000)
+    #error BOOTLOADER_ADDRESS!=0x1E000, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#else
+  #error undefined device selection - this should not happen! 
+#endif
+
+//assume  SPMCR:=SPMCSR==0x68, SPMEN==0x0, RWWSRE=0x4, RWWSB=0x6 and rampZ=0x3b
+#if HAVE_SPMINTEREFACE_MAGICVALUE
+const uint16_t bootloader__do_spm[28] BOOTLIBLINK = {
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 28) & 0xf))<<8) | (0x70 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 24) & 0xf))), // r23
+  bootloader__do_spm_magic_exitstrategy(0xf4c9), // brne +21+4
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 20) & 0xf))<<8) | (0x60 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 16) & 0xf))), // r22
+  bootloader__do_spm_magic_exitstrategy(0xf4b9), // brne +19+4
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 12) & 0xf))<<8) | (0x50 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  8) & 0xf))), // r21
+  bootloader__do_spm_magic_exitstrategy(0xf4a9), // brne +17+4
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  4) & 0xf))<<8) | (0x40 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  0) & 0xf))), // r20
+  bootloader__do_spm_magic_exitstrategy(0xf499), // brne +15+4
+#else
+const uint16_t bootloader__do_spm[20] BOOTLIBLINK = {
+#endif
+  0xbebb, 0x2dec, 0x2dfd, 0x90b0, 0x0068, 0xfcb0, 0xcffc, 0x9320, 0x0068,
+  0x95e8, 0x90b0, 0x0068, 0xfcb0, 0xcffc, 0xe121, 0x90b0, 0x0068, 0xfcb6,
+  0xcff0, 0x9508
+};
+/*
+0001e08c <bootloader__do_spm>:
+   1e08c:       bb be           out     0x3b, r11       ; 59
+   1e08e:       ec 2d           mov     r30, r12
+   1e090:       fd 2d           mov     r31, r13
+
+0001e092 <waitA>:
+   1e092:       b0 90 68 00     lds     r11, 0x0068
+   1e096:       b0 fc           sbrc    r11, 0
+   1e098:       fc cf           rjmp    .-8             ; 0x1e092 <waitA>
+   1e09a:       20 93 68 00     sts     0x0068, r18
+   1e09e:       e8 95           spm
+
+0001e0a0 <waitB>:
+   1e0a0:       b0 90 68 00     lds     r11, 0x0068
+   1e0a4:       b0 fc           sbrc    r11, 0
+   1e0a6:       fc cf           rjmp    .-8             ; 0x1e0a0 <waitB>
+   1e0a8:       21 e1           ldi     r18, 0x11       ; 17
+   1e0aa:       b0 90 68 00     lds     r11, 0x0068
+   1e0ae:       b6 fc           sbrc    r11, 6
+   1e0b0:       f0 cf           rjmp    .-32            ; 0x1e092 <waitA>
+   1e0b2:       08 95           ret
+*/
+
+
+
+
+
+#elif defined (__AVR_ATmega164A__) || defined (__AVR_ATmega164P__) || defined (__AVR_ATmega164PA__) || defined (__AVR_ATmega324A__) || defined (__AVR_ATmega324P__) || defined (__AVR_ATmega324PA__) || defined (__AVR_ATmega644__) || defined (__AVR_ATmega644A__) || defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644PA__) || defined (__AVR_ATmega1284__) || defined (__AVR_ATmega1284P__)
+
+#if defined (__AVR_ATmega164A__) || defined (__AVR_ATmega164P__) || defined (__AVR_ATmega164PA__)
+  #if (BOOTLOADER_ADDRESS != 0x3800)
+    #error BOOTLOADER_ADDRESS!=0x3800, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#elif defined (__AVR_ATmega324A__) || defined (__AVR_ATmega324P__) || defined (__AVR_ATmega324PA__)
+  #if (BOOTLOADER_ADDRESS != 0x7000)
+    #error BOOTLOADER_ADDRESS!=0x7000, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#elif defined (__AVR_ATmega644__) || defined (__AVR_ATmega644A__) || defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644PA__)
+  #if (BOOTLOADER_ADDRESS != 0xE000)
+    #error BOOTLOADER_ADDRESS!=0xE000, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#elif defined (__AVR_ATmega1284__) || defined (__AVR_ATmega1284P__)
+  #if (BOOTLOADER_ADDRESS != 0x1E000)
+    #error BOOTLOADER_ADDRESS!=0x1E000, on current MCU "funcaddr___bootloader__do_spm" might be currupted - please edit spminterface.h for nonstandard use
+  #endif
+#else
+  #error undefined device selection - this should not happen! 
+#endif
+

 //assume  SPMCR:=SPCSR==0x37, SPMEN==0x0, RWWSRE=0x4, RWWSB=0x6 and rampZ=0x3b
 //assume  SPMCR:=SPCSR==0x37, SPMEN==0x0, RWWSRE=0x4, RWWSB=0x6 and rampZ=0x3b

-const uint16_t bootloader__do_spm[17] BOOTLIBLINK = {0xbebb, 0x2dec, 0x2dfd, 0xb6b7, 0xfcb0, 0xcffd, 0xbf27, 0x95e8, 0xb6b7,
-                                                    0xfcb0, 0xcffd, 0xe121, 0xb6b7, 0xfcb6, 0xcff4, 0x9508, 0xFFFF};
+#if HAVE_SPMINTEREFACE_MAGICVALUE
+const uint16_t bootloader__do_spm[24] BOOTLIBLINK = {
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 28) & 0xf))<<8) | (0x70 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 24) & 0xf))), // r23
+  bootloader__do_spm_magic_exitstrategy(0xf4a9), // brne +21
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 20) & 0xf))<<8) | (0x60 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 16) & 0xf))), // r22
+  bootloader__do_spm_magic_exitstrategy(0xf499), // brne +19
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >> 12) & 0xf))<<8) | (0x50 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  8) & 0xf))), // r21
+  bootloader__do_spm_magic_exitstrategy(0xf489), // brne +17
+  (((0x30 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  4) & 0xf))<<8) | (0x40 | ((HAVE_SPMINTEREFACE_MAGICVALUE >>  0) & 0xf))), // r20
+  bootloader__do_spm_magic_exitstrategy(0xf479), // brne +15
+#else
+const uint16_t bootloader__do_spm[16] BOOTLIBLINK = {
+#endif
+  0xbebb,
+  0x2dec, 0x2dfd, 0xb6b7, 0xfcb0, 0xcffd, 0xbf27, 0x95e8, 0xb6b7,
+  0xfcb0, 0xcffd, 0xe121, 0xb6b7, 0xfcb6, 0xcff4, 0x9508
+};

 /*
 00001826 <bootloader__do_spm>:
     1826:      bb be           out     0x3b,r11        ; rampZ=r11; (rampZ is at IO 0x3b)
 /*
 00001826 <bootloader__do_spm>:
     1826:      bb be           out     0x3b,r11        ; rampZ=r11; (rampZ is at IO 0x3b)