From: Dean Camera <dean@fourwalledcubicle.com>
Date: Wed, 20 May 2015 07:20:27 +0000 (+1000)
Subject: Add conflict warning to the AVRISP-MKII Clone project.
X-Git-Tag: LUFA-151115~32
X-Git-Url: http://git.linex4red.de/pub/USBasp.git/commitdiff_plain/8fb0b4905ae95a1c5dce72a1b679dd1aea6481f0?ds=sidebyside;hp=--cc

Add conflict warning to the AVRISP-MKII Clone project.
---

8fb0b4905ae95a1c5dce72a1b679dd1aea6481f0
diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.c b/Projects/AVRISP-MKII/AVRISP-MKII.c
index 82325e55e..6d4bc89ae 100644
--- a/Projects/AVRISP-MKII/AVRISP-MKII.c
+++ b/Projects/AVRISP-MKII/AVRISP-MKII.c
@@ -36,6 +36,16 @@
 
 #include "AVRISP-MKII.h"
 
+#if (BOARD != BOARD_NONE)
+  /* Some board hardware definitions (e.g. the Arduino Micro) have their LEDs defined on the same pins
+     as the ISP, PDI or TPI interfaces (see the accompanying project documentation). If a board other
+     than NONE is selected (to enable the LED driver with the programmer) you should double-check that
+     no conflicts will occur. If there is a conflict, turn off the LEDs (set BOARD to NONE in the makefile)
+     or define a custom board driver (see the LUFA manual) with alternative LED mappings.
+  */
+  #warning Board specific drivers have been selected; make sure the board LED driver does not conflict with the programmer ISP/PDI/TPI interfaces.
+#endif
+
 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.
  */