Fix up some missing target dependencies and output messages in the LUFA build system...

diff --git a/LUFA/Build/lufa_cppcheck.mk b/LUFA/Build/lufa_cppcheck.mk
index b247ee7..65f7db8 100644 (file)
--- a/LUFA/Build/lufa_cppcheck.mk
+++ b/LUFA/Build/lufa_cppcheck.mk
@@ -93,12 +93,12 @@ endif
 MSG_CPPCHECK_CMD         := ' [CPPCHECK]:'
 
 # Checks the CPPCheck configuration as used in the user project, to determine if any paths are missing or invalid
 MSG_CPPCHECK_CMD         := ' [CPPCHECK]:'
 
 # Checks the CPPCheck configuration as used in the user project, to determine if any paths are missing or invalid

-cppcheck-config:
+cppcheck-config: $(MAKEFILE_LIST)

        @echo $(MSG_CPPCHECK_CMD) Checking cppcheck configuration check on source files
        cppcheck $(BASE_CPPCHECK_FLAGS) --check-config $(CPPCHECK_FLAGS) $(SRC)
 
 # Runs a static analysis using CPPCheck to determine if there are any issues
        @echo $(MSG_CPPCHECK_CMD) Checking cppcheck configuration check on source files
        cppcheck $(BASE_CPPCHECK_FLAGS) --check-config $(CPPCHECK_FLAGS) $(SRC)
 
 # Runs a static analysis using CPPCheck to determine if there are any issues

-cppcheck:
+cppcheck: $(MAKEFILE_LIST)

        @echo $(MSG_CPPCHECK_CMD) Performing static analysis on source files
        cppcheck $(BASE_CPPCHECK_FLAGS) --enable=$(CPPCHECK_ENABLE) $(CPPCHECK_SUPPRESS:%=--suppress=%) $(CPPCHECK_FLAGS) $(SRC)
 
        @echo $(MSG_CPPCHECK_CMD) Performing static analysis on source files
        cppcheck $(BASE_CPPCHECK_FLAGS) --enable=$(CPPCHECK_ENABLE) $(CPPCHECK_SUPPRESS:%=--suppress=%) $(CPPCHECK_FLAGS) $(SRC)
 

diff --git a/LUFA/Build/lufa_dfu.mk b/LUFA/Build/lufa_dfu.mk
index ddb7aab..36c8461 100644 (file)
--- a/LUFA/Build/lufa_dfu.mk
+++ b/LUFA/Build/lufa_dfu.mk
@@ -71,13 +71,13 @@ flip: $(TARGET).hex $(MAKEFILE_LIST)
 
 # Programs in the target EEPROM memory using BATCHISP, the command line tool used by FLIP
 flip-ee: $(TARGET).eep $(MAKEFILE_LIST)
 
 # Programs in the target EEPROM memory using BATCHISP, the command line tool used by FLIP
 flip-ee: $(TARGET).eep $(MAKEFILE_LIST)

-       @echo $(MSG_DFU_CMD) Copying EEP file to temporary file \"$<.hex\"
+       @echo $(MSG_COPY_CMD) Copying EEP file to temporary file \"$<.hex\"

        cp $< $<.hex
        @echo $(MSG_DFU_CMD) Programming EEPROM with batchisp using \"$<.hex\"
        batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
        batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $<.hex program
        batchisp -hardware usb -device $(MCU) -operation start reset 0
        cp $< $<.hex
        @echo $(MSG_DFU_CMD) Programming EEPROM with batchisp using \"$<.hex\"
        batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
        batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $<.hex program
        batchisp -hardware usb -device $(MCU) -operation start reset 0

-       @echo $(MSG_DFU_CMD) Removing temporary file \"$<.hex\"
+       @echo $(MSG_REMOVE_CMD) Removing temporary file \"$<.hex\"

        rm $<.hex
        
 # Programs in the target FLASH memory using DFU-PROGRAMMER
        rm $<.hex
        
 # Programs in the target FLASH memory using DFU-PROGRAMMER

diff --git a/LUFA/Build/lufa_doxygen.mk b/LUFA/Build/lufa_doxygen.mk
index fe53b25..cf66cf4 100644 (file)
--- a/LUFA/Build/lufa_doxygen.mk
+++ b/LUFA/Build/lufa_doxygen.mk
@@ -82,17 +82,17 @@ $(DOXYGEN_CONF):
        $(error Doxygen configuration file $@ does not exist)
 
 # Builds the project documentation using the specified configuration file and the DOXYGEN tool
        $(error Doxygen configuration file $@ does not exist)
 
 # Builds the project documentation using the specified configuration file and the DOXYGEN tool

-doxygen: $(DOXYGEN_CONF)
+doxygen: $(DOXYGEN_CONF) $(MAKEFILE_LIST)

        @echo $(MSG_DOXYGEN_CMD) Configuration file \"$(DOXYGEN_CONF)\" with parameters \"$(DOXYGEN_OVERRIDE_PARAMS)\"
        $(DOXYGEN_CMD)
 
 # Upgrades an existing Doxygen configuration file to the latest Doxygen template, preserving settings
        @echo $(MSG_DOXYGEN_CMD) Configuration file \"$(DOXYGEN_CONF)\" with parameters \"$(DOXYGEN_OVERRIDE_PARAMS)\"
        $(DOXYGEN_CMD)
 
 # Upgrades an existing Doxygen configuration file to the latest Doxygen template, preserving settings

-doxygen_upgrade: $(DOXYGEN_CONF)
+doxygen_upgrade: $(DOXYGEN_CONF) $(MAKEFILE_LIST)

        @echo $(MSG_DOXYGEN_CMD) Upgrading configuration file \"$(DOXYGEN_CONF)\" with latest template
        doxygen -u $(DOXYGEN_CONF) > /dev/null
 
 # Creates a new Doxygen configuration file with the set file name
        @echo $(MSG_DOXYGEN_CMD) Upgrading configuration file \"$(DOXYGEN_CONF)\" with latest template
        doxygen -u $(DOXYGEN_CONF) > /dev/null
 
 # Creates a new Doxygen configuration file with the set file name

-doxygen_create:
+doxygen_create: $(MAKEFILE_LIST)

        @echo $(MSG_DOXYGEN_CMD) Creating new configuration file \"$(DOXYGEN_CONF)\" with latest template
        doxygen -g $(DOXYGEN_CONF) > /dev/null
 
        @echo $(MSG_DOXYGEN_CMD) Creating new configuration file \"$(DOXYGEN_CONF)\" with latest template
        doxygen -g $(DOXYGEN_CONF) > /dev/null