Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
Fix allowable F_CPU values comment in project makefiles.
# make program = Download the hex file to the device, using avrdude.\r
# Please customize the avrdude settings below first!\r
#\r
+# make dfu = Download the hex file to the device, using dfu-programmer (must\r
+# have dfu-programmer installed).\r
+#\r
+# make flip = Download the hex file to the device, using Atmel FLIP (must\r
+# have Atmel FLIP installed).\r
+#\r
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer\r
+# (must have dfu-programmer installed).\r
+#\r
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP\r
+# (must have Atmel FLIP installed).\r
+#\r
# make doxygen = Generate DoxyGen documentation for the project (must have\r
# DoxyGen installed)\r
#\r
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
# -Map: create map file\r
# --cref: add cross reference to map file\r
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
-LDFLAGS += -Wl,--relax\r
-LDFLAGS += -Wl,--gc-sections\r
LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)\r
+LDFLAGS += -Wl,--relax \r
+LDFLAGS += -Wl,--gc-sections\r
LDFLAGS += $(EXTMEMOPTS)\r
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))\r
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
clean_list clean_binary gdb-config doxygen
\ No newline at end of file
# make program = Download the hex file to the device, using avrdude.\r
# Please customize the avrdude settings below first!\r
#\r
+# make dfu = Download the hex file to the device, using dfu-programmer (must\r
+# have dfu-programmer installed).\r
+#\r
+# make flip = Download the hex file to the device, using Atmel FLIP (must\r
+# have Atmel FLIP installed).\r
+#\r
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer\r
+# (must have dfu-programmer installed).\r
+#\r
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP\r
+# (must have Atmel FLIP installed).\r
+#\r
# make doxygen = Generate DoxyGen documentation for the project (must have\r
# DoxyGen installed)\r
#\r
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
# -Map: create map file\r
# --cref: add cross reference to map file\r
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
-LDFLAGS += -Wl,--relax\r
-LDFLAGS += -Wl,--gc-sections\r
LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)\r
+LDFLAGS += -Wl,--relax \r
+LDFLAGS += -Wl,--gc-sections\r
LDFLAGS += $(EXTMEMOPTS)\r
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))\r
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)\r
\r
# Uncomment the following if you do /not/ wish a verification to be\r
# performed after programming the device.\r
-AVRDUDE_NO_VERIFY = -V\r
+#AVRDUDE_NO_VERIFY = -V\r
\r
# Increase verbosity level. Please use this when submitting bug\r
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> \r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
clean_list clean_binary gdb-config doxygen
\ No newline at end of file
# make program = Download the hex file to the device, using avrdude.\r
# Please customize the avrdude settings below first!\r
#\r
+# make dfu = Download the hex file to the device, using dfu-programmer (must\r
+# have dfu-programmer installed).\r
+#\r
+# make flip = Download the hex file to the device, using Atmel FLIP (must\r
+# have Atmel FLIP installed).\r
+#\r
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer\r
+# (must have dfu-programmer installed).\r
+#\r
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP\r
+# (must have Atmel FLIP installed).\r
+#\r
# make doxygen = Generate DoxyGen documentation for the project (must have\r
# DoxyGen installed)\r
#\r
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 16000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
# -Map: create map file\r
# --cref: add cross reference to map file\r
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
+LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)\r
LDFLAGS += -Wl,--relax \r
LDFLAGS += -Wl,--gc-sections\r
-LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)\r
LDFLAGS += $(EXTMEMOPTS)\r
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))\r
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
# Place -D or -U options here for C sources\r
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)\r
-CDEFS += -DAUDIO_OUT_STEREO\r
\r
\r
# Place -D or -U options here for ASM sources\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
# -Map: create map file\r
# --cref: add cross reference to map file\r
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
-LDFLAGS += -Wl,--relax\r
+LDFLAGS += -Wl,--relax \r
LDFLAGS += -Wl,--gc-sections\r
LDFLAGS += $(EXTMEMOPTS)\r
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
# -Map: create map file\r
# --cref: add cross reference to map file\r
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
-LDFLAGS += -Wl,--relax\r
+LDFLAGS += -Wl,--relax \r
LDFLAGS += -Wl,--gc-sections\r
LDFLAGS += $(EXTMEMOPTS)\r
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
# To rebuild project do "make clean" then "make all".\r
#----------------------------------------------------------------------------\r
\r
+\r
# MCU name\r
MCU = at90usb1287\r
\r
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt\r
\r
# If this is left blank, then it will use the Standard printf version.\r
-#PRINTF_LIB = \r
-PRINTF_LIB = $(PRINTF_LIB_MIN)\r
+PRINTF_LIB = \r
+#PRINTF_LIB = $(PRINTF_LIB_MIN)\r
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)\r
\r
\r
# -Map: create map file\r
# --cref: add cross reference to map file\r
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
-LDFLAGS += -Wl,--relax\r
+LDFLAGS += -Wl,--relax \r
LDFLAGS += -Wl,--gc-sections\r
LDFLAGS += $(EXTMEMOPTS)\r
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
* - The HID report parser now always processed FEATURE items - HID_ENABLE_FEATURE_PROCESSING token now has no effect\r
* - The HID report parser now always ignores constant-data items, HID_INCLUDE_CONSTANT_DATA_ITEMS token now has no effect\r
* - The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool\r
+ * - Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names\r
+ * are used in a project\r
*\r
* <b>Fixed:</b>\r
* - Fixed possible lockup in the CDC device class driver, when the host sends data that is a multiple of the\r
* - Fixed StillImageHost not correctly freezing and unfreezing data pipes while waiting for a response block header\r
* - Fixed error in PrinterHost preventing the full page data from being sent to the attached device\r
* - CDC based demos and project now work under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker)\r
+ * - Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)\r
+ * - Fix allowable F_CPU values comment in project makefiles\r
*\r
*\r
* \section Sec_ChangeLog090810 Version 090810\r
*\r
* <b>Targeted for This Release:</b>\r
* - Finish HID and Still Image Host Mode Class Drivers, add demo summaries\r
- * - Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles\r
- * - Add in new invalid event hook check targets to project makefiles\r
- * - Fix allowable F_CPU values comment in project makefiles\r
*\r
* <b>Targeted for Future Releases:</b>\r
* - Add hub support to match Atmel's stack\r
./Drivers/Peripheral/Serial.c \\r
./Drivers/Peripheral/SerialStream.c \\r
\r
-all:\r
- \r
+LUFA_Events.lst:\r
+ @echo\r
+ @echo Generating LUFA event name list...\r
+ @$(shell) cat `find ./ -name "*.h"` | egrep "EVENT_[^\(]*\(" | \\r
+ sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ cut -d'(' -f1 | sort | uniq > LUFA_Events.lst\r
+ \r
+all: LUFA_Events.lst\r
+\r
clean:\r
rm -f $(LUFA_SRC_FILES:%.c=%.o)\r
+ rm -f LUFA_Events.lst\r
\r
clean_list:\r
\r
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
# List C source files here. (C dependencies are automatically generated.)\r
SRC = $(TARGET).c \\r
- Descriptors.c \
+ Descriptors.c \\r
Lib/V2Protocol.c \\r
Lib/V2ProtocolParams.c \\r
Lib/V2ProtocolTarget.c \\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency. You can then use this symbol in your source code to
+# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
-# Typical values are:
-# F_CPU = 1000000
-# F_CPU = 1843200
-# F_CPU = 2000000
-# F_CPU = 3686400
-# F_CPU = 4000000
-# F_CPU = 7372800
-# F_CPU = 8000000
-# F_CPU = 11059200
-# F_CPU = 14745600
-# F_CPU = 16000000
-# F_CPU = 18432000
-# F_CPU = 20000000
+#
+# This will be an integer division of F_CLOCK below, as it is sourced by
+# F_CLOCK after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
F_CPU = 16000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
-# input clock frequency (before any prescaling is performed). This value may
+# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
# Default target.
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-showeventhooks: build
- @echo
- @echo -------- Unhooked LUFA Events --------
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
- echo "(None)"
- @echo --------------------------------------
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
+ @echo
+ @echo Checking for invalid events...
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
+ @if test -s InvalidEvents.tmp; then exit 1; fi
+
showliboptions:
@echo
@echo ---- Compile Time Library Options ----
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
@echo --------------------------------------
+
# Display compiler version information.
gccversion :
@$(CC) --version
-
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+flip: $(TARGET).hex
+ batchisp -hardware usb -device $(MCU) -operation erase f
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+ batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+ dfu-programmer $(MCU) erase
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) reset
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+ batchisp -hardware usb -device $(MCU) -operation start reset 0
+ $(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
+ $(REMOVE) InvalidEvents.tmp
$(REMOVEDIR) .dep
-
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
# Listing of phony targets.
-.PHONY : all showeventhooks showliboptions showtarget \
-begin finish end sizebefore sizeafter gccversion build \
-elf hex eep lss sym coff extcoff program clean debug \
-clean_list clean_binary gdb-config doxygen dfu flip \
-flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions \
+showtarget begin finish end sizebefore sizeafter \
+gccversion build elf hex eep lss sym coff extcoff \
+program dfu flip flip-ee dfu-ee clean debug \
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
\r
# Processor frequency.\r
# This will define a symbol, F_CPU, in all source code files equal to the \r
-# processor frequency. You can then use this symbol in your source code to \r
+# processor frequency in Hz. You can then use this symbol in your source code to \r
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
# automatically to create a 32-bit value in your source code.\r
-# Typical values are:\r
-# F_CPU = 1000000\r
-# F_CPU = 1843200\r
-# F_CPU = 2000000\r
-# F_CPU = 3686400\r
-# F_CPU = 4000000\r
-# F_CPU = 7372800\r
-# F_CPU = 8000000\r
-# F_CPU = 11059200\r
-# F_CPU = 14745600\r
-# F_CPU = 16000000\r
-# F_CPU = 18432000\r
-# F_CPU = 20000000\r
+#\r
+# This will be an integer division of F_CLOCK below, as it is sourced by\r
+# F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
F_CPU = 8000000\r
\r
\r
# Input clock frequency.\r
# This will define a symbol, F_CLOCK, in all source code files equal to the \r
-# input clock frequency (before any prescaling is performed). This value may\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
# differ from F_CPU if prescaling is used on the latter, and is required as the\r
# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-showeventhooks: build\r
- @echo\r
- @echo -------- Unhooked LUFA Events --------\r
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
- echo "(None)"\r
- @echo --------------------------------------\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+ @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r
+ @echo\r
+ @echo Checking for invalid events...\r
+ @$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+ grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+ @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+ @if test -s InvalidEvents.tmp; then exit 1; fi\r
+ \r
showliboptions:\r
@echo\r
@echo ---- Compile Time Library Options ----\r
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
@echo --------------------------------------\r
\r
+\r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
\r
\r
-\r
# Program the device. \r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
+flip: $(TARGET).hex\r
+ batchisp -hardware usb -device $(MCU) -operation erase f\r
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+\r
+dfu: $(TARGET).hex\r
+ dfu-programmer $(MCU) erase\r
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+ dfu-programmer $(MCU) reset\r
+\r
+flip-ee: $(TARGET).hex $(TARGET).eep\r
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
+ batchisp -hardware usb -device $(MCU) -operation start reset 0\r
+ $(REMOVE) $(TARGET)eep.hex\r
+\r
+dfu-ee: $(TARGET).hex $(TARGET).eep\r
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+ dfu-programmer $(MCU) reset\r
+\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
+ $(REMOVE) InvalidEvents.tmp\r
$(REMOVEDIR) .dep\r
\r
-\r
doxygen:\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all showeventhooks showliboptions showtarget \\r
-begin finish end sizebefore sizeafter gccversion build \\r
-elf hex eep lss sym coff extcoff program clean debug \\r
-clean_list clean_binary gdb-config doxygen dfu flip \\r
-flip-ee dfu-ee\r
+.PHONY : all checkinvalidevents showliboptions \\r
+showtarget begin finish end sizebefore sizeafter \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
projects / pub / USBasp.git / commitdiff