X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/feabfd12ce3d14b43d2decb2b2f1c5b27e9d6181..a56d95e8c2f77e0099014689221ca6881ef5563d:/Bootloaders/TeensyHID/makefile

diff --git a/Bootloaders/TeensyHID/makefile b/Bootloaders/TeensyHID/makefile
index ea528fb00..c7210f0e8 100644
--- a/Bootloaders/TeensyHID/makefile
+++ b/Bootloaders/TeensyHID/makefile
@@ -32,6 +32,18 @@
 # make program = Download the hex file to the device, using avrdude.
 #                Please customize the avrdude settings below first!
 #
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #
@@ -48,39 +60,32 @@
 
 
 # MCU name
-MCU = at90usb162
+MCU = atmega32u4
 
 
 # Target board (see library "Board Types" documentation, USER or blank for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD  = 
 
 
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the 
-#     processor frequency. You can then use this symbol in your source code to 
+#     processor frequency in Hz. You can then use this symbol in your source code to 
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
-#     Typical values are:
-#         F_CPU =  1000000
-#         F_CPU =  1843200
-#         F_CPU =  2000000
-#         F_CPU =  3686400
-#         F_CPU =  4000000
-#         F_CPU =  7372800
-#         F_CPU =  8000000
-#         F_CPU = 11059200
-#         F_CPU = 14745600
-#         F_CPU = 16000000
-#         F_CPU = 18432000
-#         F_CPU = 20000000
+#
+#     This will be an integer division of F_CLOCK below, as it is sourced by
+#     F_CLOCK after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
 F_CPU = 16000000
 
 
 # Input clock frequency.
 #     This will define a symbol, F_CLOCK, in all source code files equal to the 
-#     input clock frequency (before any prescaling is performed). This value may
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
@@ -89,7 +94,11 @@ F_CPU = 16000000
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_CLOCK = 16000000
+F_CLOCK = $(F_CPU)
+
+
+# Starting byte address of the bootloader
+BOOT_START = 0x7000
 
 
 # Output format. (can be srec, ihex, binary)
@@ -112,12 +121,14 @@ LUFA_PATH = ../..
 
 # LUFA library compile-time options
 LUFA_OPTS  = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D USE_NONSTANDARD_DESCRIPTOR_NAMES
-LUFA_OPTS += -D CONTROL_ONLY_DEVICE
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D USE_SINGLE_DEVICE_CONFIGURATION
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=64
+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 LUFA_OPTS += -D USE_RAM_DESCRIPTORS
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS += -D NO_INTERNAL_SERIAL
+LUFA_OPTS += -D NO_DEVICE_SELF_POWER
+LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
 
 
 # List C source files here. (C dependencies are automatically generated.)
@@ -177,10 +188,6 @@ EXTRAINCDIRS = $(LUFA_PATH)/
 CSTANDARD = -std=gnu99
 
 
-# Starting byte address of the bootloader
-BOOT_START = 0xC000
-
-
 # Place -D or -U options here for C sources
 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
@@ -318,9 +325,9 @@ EXTMEMOPTS =
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)
 LDFLAGS += -Wl,--relax 
 LDFLAGS += -Wl,--gc-sections
-LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
@@ -457,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 # Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
 
 # Change the build target to build a HEX file or a library.
 build: elf hex eep lss sym
@@ -500,38 +507,64 @@ sizeafter:
 	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 	2>/dev/null; echo; fi
 
-checkhooks: build
-	@echo
-	@echo ------- Unhooked LUFA Events -------
-	@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
-	           cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
-			   echo "(None)"
-	@echo ------------------------------------
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:
+	@make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
 
-checklibmode:
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
+	@echo
+	@echo Checking for invalid events...
+	@$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
+	                 grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
+	@sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
+	@if test -s InvalidEvents.tmp; then exit 1; fi
+	
+showliboptions:
 	@echo
-	@echo ----------- Library Mode -----------
-	@$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
-	          | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
-	          || echo "No specific mode (both device and host mode allowable)."
-	@echo ------------------------------------
+	@echo ---- Compile Time Library Options ----
+	@for i in $(LUFA_OPTS:-D%=%); do \
+		echo $$i; \
+	done
+	@echo --------------------------------------
 
-checkboard:
+showtarget:
 	@echo
-	@echo ---------- Selected Board ----------
-	@echo Selected board model is $(BOARD).
-	@echo ------------------------------------
+	@echo --------- Target Information ---------
+	@echo AVR Model: $(MCU)
+	@echo Board:     $(BOARD)
+	@echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+	@echo --------------------------------------
 	
+
 # Display compiler version information.
 gccversion : 
 	@$(CC) --version
 
 
-
 # Program the device.  
 program: $(TARGET).hex $(TARGET).eep
 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
+flip: $(TARGET).hex
+	batchisp -hardware usb -device $(MCU) -operation erase f
+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) reset
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+	$(COPY) $(TARGET).eep $(TARGET)eep.hex
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+	$(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) reset
+
 
 # Generate avr-gdb config/init file which does the following:
 #     define the reset signal, load the target file, connect to target, and set 
@@ -686,9 +719,9 @@ clean_list:
 	$(REMOVE) $(SRC:.c=.s)
 	$(REMOVE) $(SRC:.c=.d)
 	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVE) InvalidEvents.tmp
 	$(REMOVEDIR) .dep
 
-
 doxygen:
 	@echo Generating Project Documentation...
 	@doxygen Doxygen.conf
@@ -706,8 +739,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 
 
 # Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard   \
-begin finish end sizebefore sizeafter gccversion  \
-build elf hex eep lss sym coff extcoff clean      \
-clean_list clean_binary program debug gdb-config  \
-doxygen
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions    \
+showtarget begin finish end sizebefore sizeafter  \
+gccversion build elf hex eep lss sym coff extcoff \
+program dfu flip flip-ee dfu-ee clean debug       \
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file