X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/fe62770a1ea8078ec6234ef9f92e39a7f542ce9e..70fd816b094ccb28c03c798cc0625630f207a8ac:/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
index aa9a74fae..ff1d3c26e 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
+++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
@@ -1,87 +1,86 @@
-/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo
- *
- * \section Sec_Compat Demo Compatibility:
- *
- * The following list indicates what microcontrollers are compatible with this demo.
- *
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *
- * \section Sec_Info USB Information:
- *
- * The following table gives a rundown of the USB utilization of this demo.
- *
- *
- *
- * USB Mode: |
- * Device |
- *
- *
- * USB Class: |
- * Communications Device Class (CDC) \n
- * Mass Storage Device |
- *
- *
- * USB Subclass: |
- * Abstract Control Model (ACM) \n
- * Bulk-Only Transport |
- *
- *
- * Relevant Standards: |
- * USBIF CDC Class Standard \n
- * USBIF Mass Storage Standard \n
- * USB Bulk-Only Transport Standard \n
- * SCSI Primary Commands Specification \n
- * SCSI Block Commands Specification |
- *
- *
- * Usable Speeds: |
- * Full Speed Mode |
- *
- *
- *
- * \section Sec_Description Project Description:
- *
- * Combined Communications Device Class/Mass Storage demonstration application.
- * This gives a simple reference application for implementing a combined
- * CDC and Mass Storage device acting as a both a virtual serial port and a flash
- * drive. Joystick actions are transmitted to the host as strings, and data can be
- * written to or read from the exposed flash drive interface in the same manner as
- * other USB flash drives. The device does not respond to serial data sent from the
- * host.
- *
- * After running this demo for the first time on a new computer,
- * you will need to supply the .INF file located in this demo
- * project's directory as the device's driver when running under
- * Windows. This will enable Windows to use its inbuilt CDC drivers,
- * negating the need for custom drivers for the device. Other
- * Operating Systems should automatically use their own inbuilt
- * CDC-ACM drivers.
- *
- * \section Sec_Options Project Options
- *
- * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *
- *
- * Define Name: |
- * Location: |
- * Description: |
- *
- *
- * TOTAL_LUNS |
- * MassStorage.h |
- * Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
- * this can be set to any positive non-zero amount. |
- *
- *
- */
-
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo
+ *
+ * \section Sec_Compat Demo Compatibility:
+ *
+ * The following list indicates what microcontrollers are compatible with this demo.
+ *
+ * - Series 7 USB AVRs (AT90USBxxx7)
+ * - Series 6 USB AVRs (AT90USBxxx6)
+ * - Series 4 USB AVRs (ATMEGAxxU4)
+ *
+ * \section Sec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this demo.
+ *
+ *
+ *
+ * USB Mode: |
+ * Device |
+ *
+ *
+ * USB Class: |
+ * Communications Device Class (CDC) \n
+ * Mass Storage Device |
+ *
+ *
+ * USB Subclass: |
+ * Abstract Control Model (ACM) \n
+ * Bulk-Only Transport |
+ *
+ *
+ * Relevant Standards: |
+ * USBIF CDC Class Standard \n
+ * USBIF Mass Storage Standard \n
+ * USB Bulk-Only Transport Standard \n
+ * SCSI Primary Commands Specification \n
+ * SCSI Block Commands Specification |
+ *
+ *
+ * Usable Speeds: |
+ * Full Speed Mode |
+ *
+ *
+ *
+ * \section Sec_Description Project Description:
+ *
+ * Combined Communications Device Class/Mass Storage demonstration application.
+ * This gives a simple reference application for implementing a combined
+ * CDC and Mass Storage device acting as a both a virtual serial port and a flash
+ * drive. Joystick actions are transmitted to the host as strings, and data can be
+ * written to or read from the exposed flash drive interface in the same manner as
+ * other USB flash drives. The device does not respond to serial data sent from the
+ * host.
+ *
+ * After running this demo for the first time on a new computer,
+ * you will need to supply the .INF file located in this demo
+ * project's directory as the device's driver when running under
+ * Windows. This will enable Windows to use its inbuilt CDC drivers,
+ * negating the need for custom drivers for the device. Other
+ * Operating Systems should automatically use their own inbuilt
+ * CDC-ACM drivers.
+ *
+ * \section Sec_Options Project Options
+ *
+ * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *
+ *
+ * Define Name: |
+ * Location: |
+ * Description: |
+ *
+ *
+ * TOTAL_LUNS |
+ * MassStorage.h |
+ * Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
+ * this can be set to any positive non-zero amount. |
+ *
+ *
+ */
+