X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/fdcb486e225f75ebc9fdc10685b1bb7570d481e6..6d2a08f1b77208de1f71dd4035d21f13e3f90462:/Bootloaders/CDC/BootloaderCDC.txt

diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt
index f4208ee4c..81e454d0e 100644
--- a/Bootloaders/CDC/BootloaderCDC.txt
+++ b/Bootloaders/CDC/BootloaderCDC.txt
@@ -3,10 +3,10 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage CDC Class USB AVR Bootloader
  *
- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
@@ -15,7 +15,7 @@
  *  - Series 4 USB AVRs (ATMEGAxxU4)
  *  - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
  *
- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
@@ -28,7 +28,7 @@
  *    <td><b>USB Class:</b></td>
  *    <td>Communications Device Class (CDC)</td>
  *   </tr>
- *   <tr> 
+ *   <tr>
  *    <td><b>USB Subclass:</b></td>
  *    <td>Abstract Control Model (ACM)</td>
  *   </tr>
@@ -42,15 +42,15 @@
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:
  *
  *  This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
- *  protocol compatible programming software to load firmware onto the AVR.	
- *  
+ *  protocol compatible programming software to load firmware onto the AVR.
+ *
  *  Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
  *  you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
  *  values in the accompanying makefile.
- *  
+ *
  *  This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.
  *
  *  After running this bootloader for the first time on a new computer, you will need to supply the .INF
@@ -58,15 +58,34 @@
  *  This will enable Windows to use its inbuilt CDC drivers, negating the need for custom drivers for the
  *  device. Other Operating Systems should automatically use their own inbuilt CDC-ACM drivers.
  *
- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
  *  <table>
  *   <tr>
- *    <td>
- *     None
- *    </td>
+ *    <td>NO_BLOCK_SUPPORT</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made
+ *        using the byte-level commands.
+ *   </tr>
+ *   <tr>
+ *    <td>NO_EEPROM_BYTE_SUPPORT</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes
+ *        to be made using the block-level commands.
+ *   </tr>
+ *   <tr>
+ *    <td>NO_FLASH_BYTE_SUPPORT</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes
+ *        to be made using the block-level commands.
+ *   </tr>
+ *   <tr>
+ *    <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set progmatically.
  *   </tr>
  *  </table>
  */
+