X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/fc92f9969c1fcc2f952f0bd6d09a309a9b3ce02f..e4f3d9957efee6d2259f3b9f19a26ce0c8bee95d:/LUFA/Drivers/USB/Class/Host/CDC.h
diff --git a/LUFA/Drivers/USB/Class/Host/CDC.h b/LUFA/Drivers/USB/Class/Host/CDC.h
index 562d081aa..5f59e0c3a 100644
--- a/LUFA/Drivers/USB/Class/Host/CDC.h
+++ b/LUFA/Drivers/USB/Class/Host/CDC.h
@@ -1,21 +1,21 @@
/*
LUFA Library
- Copyright (C) Dean Camera, 2010.
-
+ Copyright (C) Dean Camera, 2011.
+
dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
+ www.lufa-lib.org
*/
/*
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
@@ -33,8 +33,8 @@
*
* Host mode driver for the library USB CDC Class driver.
*
- * \note This file should not be included directly. It is automatically included as needed by the class driver
- * dispatch header located in LUFA/Drivers/USB/Class/CDC.h.
+ * \note This file should not be included directly. It is automatically included as needed by the USB module driver
+ * dispatch header located in LUFA/Drivers/USB.h.
*/
/** \ingroup Group_USBClassCDC
@@ -42,9 +42,9 @@
*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/CDC.c
+ * - LUFA/Drivers/USB/Class/Host/CDC.c (Makefile source module name: LUFA_SRC_USBCLASS)
*
- * \section Module Description
+ * \section Sec_ModDescription Module Description
* Host Mode USB Class driver framework interface, for the CDC USB Class driver.
*
* @{
@@ -59,7 +59,7 @@
#include
#include
-
+
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
@@ -67,7 +67,7 @@
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_CDC_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/Class/CDC.h instead.
+ #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
#endif
/* Public Interface - May be used in end-application: */
@@ -75,21 +75,21 @@
/** \brief CDC Class Host Mode Configuration and State Structure.
*
* Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the CDC class driver functions as the CDCInterfaceInfo parameter. This
+ * and passed to each of the CDC class driver functions as the \c CDCInterfaceInfo parameter. This
* stores each CDC interface's configuration and state information.
*/
typedef struct
{
const struct
{
- uint8_t DataINPipeNumber; /**< Pipe number of the CDC interface's IN data pipe */
- bool DataINPipeDoubleBank; /**< Indicates if the CDC interface's IN data pipe should use double banking */
+ uint8_t DataINPipeNumber; /**< Pipe number of the CDC interface's IN data pipe. */
+ bool DataINPipeDoubleBank; /**< Indicates if the CDC interface's IN data pipe should use double banking. */
- uint8_t DataOUTPipeNumber; /**< Pipe number of the CDC interface's OUT data pipe */
- bool DataOUTPipeDoubleBank; /**< Indicates if the CDC interface's OUT data pipe should use double banking */
+ uint8_t DataOUTPipeNumber; /**< Pipe number of the CDC interface's OUT data pipe. */
+ bool DataOUTPipeDoubleBank; /**< Indicates if the CDC interface's OUT data pipe should use double banking. */
- uint8_t NotificationPipeNumber; /**< Pipe number of the CDC interface's IN notification endpoint, if used */
- bool NotificationPipeDoubleBank; /**< Indicates if the CDC interface's notification pipe should use double banking */
+ uint8_t NotificationPipeNumber; /**< Pipe number of the CDC interface's IN notification endpoint, if used. */
+ bool NotificationPipeDoubleBank; /**< Indicates if the CDC interface's notification pipe should use double banking. */
} Config; /**< Config data for the USB class interface within the device. All elements in this section
* must be set or the interface will fail to enumerate and operate correctly.
*/
@@ -97,235 +97,250 @@
{
bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
* after \ref CDC_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state
+ * Configured state.
*/
- uint8_t ControlInterfaceNumber; /**< Interface index of the CDC-ACM control interface within the attached device */
-
- uint16_t DataINPipeSize; /**< Size in bytes of the CDC interface's IN data pipe */
- uint16_t DataOUTPipeSize; /**< Size in bytes of the CDC interface's OUT data pipe */
- uint16_t NotificationPipeSize; /**< Size in bytes of the CDC interface's IN notification pipe, if used */
-
+ uint8_t ControlInterfaceNumber; /**< Interface index of the CDC-ACM control interface within the attached device. */
+
+ uint16_t DataINPipeSize; /**< Size in bytes of the CDC interface's IN data pipe. */
+ uint16_t DataOUTPipeSize; /**< Size in bytes of the CDC interface's OUT data pipe. */
+ uint16_t NotificationPipeSize; /**< Size in bytes of the CDC interface's IN notification pipe, if used. */
+
struct
{
- uint8_t HostToDevice; /**< Control line states from the host to device, as a set of CDC_CONTROL_LINE_OUT_*
+ uint8_t HostToDevice; /**< Control line states from the host to device, as a set of \c CDC_CONTROL_LINE_OUT_*
* masks - to notify the device of changes to these values, call the
* \ref CDC_Host_SendControlLineStateChange() function.
*/
- uint8_t DeviceToHost; /**< Control line states from the device to host, as a set of CDC_CONTROL_LINE_IN_*
+ uint8_t DeviceToHost; /**< Control line states from the device to host, as a set of \c CDC_CONTROL_LINE_IN_*
* masks. This value is updated each time \ref CDC_Host_USBTask() is called.
*/
} ControlLineStates; /**< Current states of the virtual serial port's control lines between the device and host. */
-
- struct
- {
- uint32_t BaudRateBPS; /**< Baud rate of the virtual serial port, in bits per second */
- uint8_t CharFormat; /**< Character format of the virtual serial port, a value from the
- * CDCDevice_CDC_LineCodingFormats_t enum
- */
- uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the
- * CDCDevice_LineCodingParity_t enum
- */
- uint8_t DataBits; /**< Bits of data per character of the virtual serial port */
- } LineEncoding; /**< Line encoding used in the virtual serial port, for the device's information. This is generally
- * only used if the virtual serial port data is to be reconstructed on a physical UART. When set
- * by the host application, the \ref CDC_Host_SetLineEncoding() function must be called to push
- * the changes to the device.
- */
+
+ CDC_LineEncoding_t LineEncoding; /**< Line encoding used in the virtual serial port, for the device's information.
+ * This is generally only used if the virtual serial port data is to be
+ * reconstructed on a physical UART. When set by the host application, the
+ * \ref CDC_Host_SetLineEncoding() function must be called to push the changes
+ * to the device.
+ */
} State; /**< State data for the USB class interface within the device. All elements in this section
* may be set to initial values, but may also be ignored to default to sane values when
* the interface is enumerated.
*/
} USB_ClassInfo_CDC_Host_t;
-
+
/* Enums: */
/** Enum for the possible error codes returned by the \ref CDC_Host_ConfigurePipes() function. */
- enum CDCHost_EnumerationFailure_ErrorCodes_t
+ enum CDC_Host_EnumerationFailure_ErrorCodes_t
{
- CDC_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully */
- CDC_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor */
- CDC_ENUMERROR_NoCDCInterfaceFound = 2, /**< A compatible CDC interface was not found in the device's Configuration Descriptor */
- CDC_ENUMERROR_EndpointsNotFound = 3, /**< Compatible CDC endpoints were not found in the device's CDC interface */
+ CDC_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
+ CDC_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
+ CDC_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible CDC interface was not found in the device's Configuration Descriptor. */
+ CDC_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
};
-
+
/* Function Prototypes: */
/** General management task for a given CDC host class interface, required for the correct operation of the interface. This should
* be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state.
*/
void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
+
/** Host interface configuration routine, to configure a given CDC host interface instance using the Configuration
* Descriptor read from an attached USB device. This function automatically updates the given CDC Host instance's
* state values and configures the pipes required to communicate with the interface if it is found within the device.
* This should be called once after the stack has enumerated the attached device, while the host state machine is in
* the Addressed state.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
- * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
+ * \note The pipe index numbers as given in the interface's configuration structure must not overlap with any other
+ * interface, or pipe bank corruption will occur. Gaps in the allocated pipe numbers or non-sequential indexes
+ * within a single interface is allowed, but no two interfaces of any type have have interleaved pipe indexes.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state.
+ * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
+ * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor.
*
- * \return A value from the \ref CDCHost_EnumerationFailure_ErrorCodes_t enum
+ * \return A value from the \ref CDC_Host_EnumerationFailure_ErrorCodes_t enum.
*/
- uint8_t CDC_Host_ConfigurePipes(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, uint16_t ConfigDescriptorSize,
+ uint8_t CDC_Host_ConfigurePipes(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
+ uint16_t ConfigDescriptorSize,
void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Sets the line encoding for the attached device's virtual serial port. This should be called when the LineEncoding
+
+ /** Sets the line encoding for the attached device's virtual serial port. This should be called when the \c LineEncoding
* values of the interface have been changed to push the new settings to the USB device.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
*
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
*/
uint8_t CDC_Host_SetLineEncoding(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/** Sends a Serial Control Line State Change notification to the device. This should be called when the virtual serial
* control lines (DTR, RTS, etc.) have changed states. Line states persist until they are cleared via a second
- * notification. This should be called each time the CDC class driver's ControlLineStates.HostToDevice value is updated
+ * notification. This should be called each time the CDC class driver's \c ControlLineStates.HostToDevice value is updated
* to push the new states to the USB device.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
*
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
*/
uint8_t CDC_Host_SendControlLineStateChange(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a Send Break request to the device. This is generally used to seperate data data or to indicate a special condition
+
+ /** Sends a Send Break request to the device. This is generally used to separate data data or to indicate a special condition
* to the receiving device.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
- * \param[in] Duration Duration of the break, in milliseconds
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
+ * \param[in] Duration Duration of the break, in milliseconds.
*
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
*/
- uint8_t CDC_Host_SendBreak(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, const uint8_t Duration) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a given string to the attached USB device, if connected. If a device is not connected when the function is called, the
- * string is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the
- * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
- * packed into a single pipe packet, increasing data throughput.
+ uint8_t CDC_Host_SendBreak(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
+ const uint8_t Duration) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Sends a given data buffer to the attached USB device, if connected. If a device is not connected when the function is
+ * called, the data will be discarded. Bytes will be queued for transmission to the device until either the pipe bank
+ * becomes full, or the \ref CDC_Host_Flush() function is called to flush the pending data to the device. This allows for
+ * multiple bytes to be packed into a single pipe packet, increasing data throughput.
*
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
- * call will fail.
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
+ * call will fail.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
- * \param[in] Data Pointer to the string to send to the device
- * \param[in] Length Size in bytes of the string to send to the device
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
+ * \param[in] Buffer Pointer to a buffer containing the data to send to the device.
+ * \param[in] Length Length of the data to send to the device.
*
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t CDC_Host_SendString(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, char* Data, const uint16_t Length)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
+ uint8_t CDC_Host_SendData(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
+ const uint8_t* const Buffer,
+ const uint16_t Length);
+
+ /** Sends a given null-terminated string to the attached USB device, if connected. If a device is not connected when the
+ * function is called, the string is discarded. Bytes will be queued for transmission to the device until either the pipe
+ * bank becomes full, or the \ref CDC_Host_Flush() function is called to flush the pending data to the device. This allows
+ * for multiple bytes to be packed into a single pipe packet, increasing data throughput.
+ *
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
+ * \param[in] String Pointer to the null terminated string to send to the device.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t CDC_Host_SendString(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
+ const char* const String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
/** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the
* byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the
- * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
+ * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
* packed into a single pipe packet, increasing data throughput.
*
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
- * call will fail.
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
+ * call will fail.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
- * \param[in] Data Byte of data to send to the device
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
+ * \param[in] Data Byte of data to send to the device.
*
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum
+ * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
*/
- uint8_t CDC_Host_SendByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t CDC_Host_SendByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
+ const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
- /** Determines the number of bytes received by the CDC interface from the device, waiting to be read.
+ /** Determines the number of bytes received by the CDC interface from the device, waiting to be read. This indicates the number
+ * of bytes in the IN pipe bank only, and thus the number of calls to \ref CDC_Host_ReceiveByte() which are guaranteed to succeed
+ * immediately. If multiple bytes are to be received, they should be buffered by the user application, as the pipe bank will not be
+ * released back to the USB controller until all bytes are read.
*
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
- * call will fail.
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
+ * call will fail.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
*
- * \return Total number of buffered bytes received from the device
+ * \return Total number of buffered bytes received from the device.
*/
uint16_t CDC_Host_BytesReceived(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/** Reads a byte of data from the device. If no data is waiting to be read of if a USB device is not connected, the function
- * returns 0. The \ref CDC_Host_BytesReceived() function should be queried before data is received to ensure that no data
- * underflow occurs.
+ * returns a negative value. The \ref CDC_Host_BytesReceived() function may be queried in advance to determine how many bytes
+ * are currently buffered in the CDC interface's data receive pipe.
*
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
- * call will fail.
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
+ * call will fail.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
*
- * \return Next received byte from the device, or 0 if no data received
+ * \return Next received byte from the device, or a negative value if no data received.
*/
- uint8_t CDC_Host_ReceiveByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
+ int16_t CDC_Host_ReceiveByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
/** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.
*
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
- * call will fail.
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
+ * call will fail.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
*
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum
+ * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
*/
uint8_t CDC_Host_Flush(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
- /** Creates a standard characer stream for the given CDC Device instance so that it can be used with all the regular
- * functions in the avr-libc library that accept a FILE stream as a destination (e.g. fprintf). The created
+ /** Creates a standard character stream for the given CDC Device instance so that it can be used with all the regular
+ * functions in the avr-libc \c library that accept a \c FILE stream as a destination (e.g. \c fprintf). The created
* stream is bidirectional and can be used for both input and output functions.
*
- * \note The created stream can be given as stdout if desired to direct the standard output from all functions
+ * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single
+ * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may
+ * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own
+ * line buffering.
+ *
+ * \note The created stream can be given as stdout if desired to direct the standard output from all \c functions
* to the given CDC interface.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
+ * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed.
*/
- void CDC_Host_CreateStream(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, FILE* Stream);
+ void CDC_Host_CreateStream(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
+ FILE* const Stream);
- /** Identical to CDC_Host_CreateStream(), except that reads are blocking until the calling stream function terminates
+ /** Identical to \ref CDC_Host_CreateStream(), except that reads are blocking until the calling stream function terminates
* the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
+ * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed.
*/
- void CDC_Host_CreateBlockingStream(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, FILE* Stream);
+ void CDC_Host_CreateBlockingStream(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
+ FILE* const Stream);
/** CDC class driver event for a control line state change on a CDC host interface. This event fires each time the device notifies
* the host of a control line state change (containing the virtual serial control line states, such as DCD) and may be hooked in the
* user program by declaring a handler function with the same name and parameters listed here. The new control line states
* are available in the ControlLineStates.DeviceToHost value inside the CDC host interface structure passed as a parameter, set as
- * a mask of CDC_CONTROL_LINE_IN_* masks.
+ * a mask of \c CDC_CONTROL_LINE_IN_* masks.
*
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
+ * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
*/
void EVENT_CDC_Host_ControLineStateChanged(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
- /* Macros: */
- #define CDC_CONTROL_CLASS 0x02
- #define CDC_CONTROL_SUBCLASS 0x02
- #define CDC_CONTROL_PROTOCOL 0x01
- #define CDC_DATA_CLASS 0x0A
- #define CDC_DATA_SUBCLASS 0x00
- #define CDC_DATA_PROTOCOL 0x00
-
- #define CDC_FOUND_DATAPIPE_IN (1 << 0)
- #define CDC_FOUND_DATAPIPE_OUT (1 << 1)
- #define CDC_FOUND_NOTIFICATION_IN (1 << 2)
-
/* Function Prototypes: */
- #if defined(__INCLUDE_FROM_CDC_CLASS_HOST_C)
- static int CDC_Host_putchar(char c, FILE* Stream);
- static int CDC_Host_getchar(FILE* Stream);
- static int CDC_Host_getchar_Blocking(FILE* Stream);
+ #if defined(__INCLUDE_FROM_CDC_HOST_C)
+ static int CDC_Host_putchar(char c,
+ FILE* Stream) ATTR_NON_NULL_PTR_ARG(2);
+ static int CDC_Host_getchar(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1);
+ static int CDC_Host_getchar_Blocking(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1);
- void CDC_Host_Event_Stub(void);
+ void CDC_Host_Event_Stub(void) ATTR_CONST;
void EVENT_CDC_Host_ControLineStateChanged(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Host_Event_Stub);
+
static uint8_t DCOMP_CDC_Host_NextCDCControlInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
static uint8_t DCOMP_CDC_Host_NextCDCDataInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_CDC_Host_NextCDCInterfaceEndpoint(void* const CurrentDescriptor);
- #endif
+ static uint8_t DCOMP_CDC_Host_NextCDCInterfaceEndpoint(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
+ #endif
#endif
-
+
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
@@ -334,3 +349,4 @@
#endif
/** @} */
+