X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/f89059280651a8dae6e4d46d4504dd566164af4e..1190652c0b210fe24320f8da9bfd5a0e169111d8:/LUFA/Drivers/USB/Class/Host/MassStorage.h diff --git a/LUFA/Drivers/USB/Class/Host/MassStorage.h b/LUFA/Drivers/USB/Class/Host/MassStorage.h index e64e143a7..ff2e9019e 100644 --- a/LUFA/Drivers/USB/Class/Host/MassStorage.h +++ b/LUFA/Drivers/USB/Class/Host/MassStorage.h @@ -47,7 +47,6 @@ /* Includes: */ #include "../../USB.h" #include "../Common/MassStorage.h" - #include "../Common/SCSICodes.h" /* Enable C linkage for C++ Compilers: */ #if defined(__cplusplus) @@ -74,10 +73,10 @@ */ struct { - bool Active; /**< Indicates if the current interface instance is connected to an attached device, valid - * after \ref HID_Host_ConfigurePipes() is called and the Host state machine is in the - * Configured state - */ + bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid + * after \ref HID_Host_ConfigurePipes() is called and the Host state machine is in the + * Configured state + */ uint8_t InterfaceNumber; /**< Interface index of the HID interface within the attached device */ uint16_t DataINPipeSize; /**< Size in bytes of the MS interface's IN data pipe */ @@ -164,13 +163,13 @@ } SCSI_Capacity_t; /* Enums: */ - enum + enum MSHost_EnumerationFailure_ErrorCodes_t { MS_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully */ MS_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor */ MS_ENUMERROR_NoMSInterfaceFound = 2, /**< A compatible Mass Storage interface was not found in the device's Configuration Descriptor */ MS_ENUMERROR_EndpointsNotFound = 3, /**< Compatible Mass Storage endpoints were not found in the device's interfaces */ - } MSHost_EnumerationFailure_ErrorCodes_t; + }; /* Function Prototypes: */ /** General management task for a given Mass Storage host class interface, required for the correct operation of @@ -190,6 +189,8 @@ * \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state * \param[in] ConfigDescriptorLength Length of the attached device's Configuration Descriptor * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor + * + * \return A value from the \ref MSHost_EnumerationFailure_ErrorCodes_t enum */ uint8_t MS_Host_ConfigurePipes(USB_ClassInfo_MS_Host_t* MSInterfaceInfo, uint16_t ConfigDescriptorLength, uint8_t* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1, 3); @@ -276,6 +277,7 @@ * \param[in] LUNIndex LUN index within the device the command is being issued to * \param[in] BlockAddress Starting block address within the device to read from * \param[in] Blocks Total number of blocks to read + * \param[in] BlockSize Size in bytes of each block within the device * \param[out] BlockBuffer Pointer to where the read data from the device should be stored * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready @@ -289,6 +291,7 @@ * \param[in] LUNIndex LUN index within the device the command is being issued to * \param[in] BlockAddress Starting block address within the device to write to * \param[in] Blocks Total number of blocks to read + * \param[in] BlockSize Size in bytes of each block within the device * \param[in] BlockBuffer Pointer to where the data to write should be sourced from * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready @@ -319,11 +322,12 @@ /* Function Prototypes: */ #if defined(INCLUDE_FROM_MS_CLASS_HOST_C) - static uint8_t DComp_NextMassStorageInterface(void* CurrentDescriptor); - static uint8_t DComp_NextInterfaceBulkDataEndpoint(void* CurrentDescriptor); + static uint8_t DComp_NextMSInterface(void* CurrentDescriptor); + static uint8_t DComp_NextMSInterfaceEndpoint(void* CurrentDescriptor); static uint8_t MS_Host_SendCommand(USB_ClassInfo_MS_Host_t* MSInterfaceInfo, - MS_CommandBlockWrapper_t* SCSICommandBlock); + MS_CommandBlockWrapper_t* SCSICommandBlock, + void* BufferPtr); static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* MSInterfaceInfo); static uint8_t MS_Host_SendReceiveData(USB_ClassInfo_MS_Host_t* MSInterfaceInfo, MS_CommandBlockWrapper_t* SCSICommandBlock, void* BufferPtr);