X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/f2324fc2b4a926dc2db5d3e681a019949fe23342..279e1b6ece7fbc90db6cb642f1c289b45648cf9c:/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 8760e62cb..0a2dee73b 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2010.
+     Copyright (C) Dean Camera, 2011.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -39,7 +39,7 @@
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
 
 /** Flag to indicate if the USART is currently in Tx or Rx mode. */
-volatile bool IsSending;
+bool IsSending;
 
 /** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */
 void XPROGTarget_EnableTargetPDI(void)
@@ -59,9 +59,9 @@ void XPROGTarget_EnableTargetPDI(void)
 	UCSR1B = (1 << TXEN1);
 	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
-	/* Send two BREAKs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
-	XPROGTarget_SendBreak();
-	XPROGTarget_SendBreak();
+	/* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
+	XPROGTarget_SendIdle();
+	XPROGTarget_SendIdle();
 }
 
 /** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
@@ -83,9 +83,9 @@ void XPROGTarget_EnableTargetTPI(void)
 	UCSR1B = (1 << TXEN1);
 	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
-	/* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
-	XPROGTarget_SendBreak();
-	XPROGTarget_SendBreak();
+	/* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
+	XPROGTarget_SendIdle();
+	XPROGTarget_SendIdle();
 }
 
 /** Disables the target's PDI interface, exits programming mode and starts the target's application. */
@@ -115,10 +115,10 @@ void XPROGTarget_DisableTargetTPI(void)
 	UCSR1B  = 0;
 	UCSR1C  = 0;
 
-	/* Set all USART lines as input, tristate */
+	/* Set all USART lines as inputs, tristate */
 	DDRD  &= ~((1 << 5) | (1 << 3));
 	PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
-
+	
 	/* Tristate target /RESET line */
 	AUX_LINE_DDR  &= ~AUX_LINE_MASK;
 	AUX_LINE_PORT &= ~AUX_LINE_MASK;
@@ -151,19 +151,19 @@ uint8_t XPROGTarget_ReceiveByte(void)
 	  XPROGTarget_SetRxMode();
 
 	/* Wait until a byte has been received before reading */
-	while (!(UCSR1A & (1 << RXC1)) && TimeoutTicksRemaining);
+	while (!(UCSR1A & (1 << RXC1)) && !(TimeoutExpired));
 
 	return UDR1;
 }
 
-/** Sends a BREAK via the USART to the attached target, consisting of a full frame of idle bits. */
-void XPROGTarget_SendBreak(void)
+/** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */
+void XPROGTarget_SendIdle(void)
 {
 	/* Switch to Tx mode if currently in Rx mode */
 	if (!(IsSending))
 	  XPROGTarget_SetTxMode();
-
-	/* Need to do nothing for a full frame to send a BREAK */
+	
+	/* Need to do nothing for a full frame to send an IDLE */
 	for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
 	{
 		/* Wait for a full cycle of the clock */