X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/f201f6697b7f99b63389509b42112026b8f6f76f..a032d77d0e8009a3ef7e1666f144cde6f08f800e:/Projects/XPLAINBridge/XPLAINBridge.c

diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c
index 6dc1859a9..7909cc45c 100644
--- a/Projects/XPLAINBridge/XPLAINBridge.c
+++ b/Projects/XPLAINBridge/XPLAINBridge.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -48,18 +48,24 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
 		.Config =
 			{
 				.ControlInterfaceNumber         = 0,
-
-				.DataINEndpointNumber           = CDC_TX_EPNUM,
-				.DataINEndpointSize             = CDC_TXRX_EPSIZE,
-				.DataINEndpointDoubleBank       = true,
-
-				.DataOUTEndpointNumber          = CDC_RX_EPNUM,
-				.DataOUTEndpointSize            = CDC_TXRX_EPSIZE,
-				.DataOUTEndpointDoubleBank      = true,
-
-				.NotificationEndpointNumber     = CDC_NOTIFICATION_EPNUM,
-				.NotificationEndpointSize       = CDC_NOTIFICATION_EPSIZE,
-				.NotificationEndpointDoubleBank = false,
+				.DataINEndpoint                 =
+					{
+						.Address                = CDC_TX_EPADDR,
+						.Size                   = CDC_TXRX_EPSIZE,
+						.Banks                  = 1,
+					},
+				.DataOUTEndpoint                =
+					{
+						.Address                = CDC_RX_EPADDR,
+						.Size                   = CDC_TXRX_EPSIZE,
+						.Banks                  = 1,
+					},
+				.NotificationEndpoint           =
+					{
+						.Address                = CDC_NOTIFICATION_EPADDR,
+						.Size                   = CDC_NOTIFICATION_EPSIZE,
+						.Banks                  = 1,
+					},
 			},
 	};
 
@@ -105,7 +111,7 @@ void AVRISP_Task(void)
 
 	V2Params_UpdateParamValues();
 
-	Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM);
+	Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR);
 
 	/* Check to see if a V2 Protocol command has been received */
 	if (Endpoint_IsOUTReceived())
@@ -170,11 +176,6 @@ void SetupHardware(void)
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
 
-	/* Hardware Initialization */
-	SoftUART_Init();
-	LEDs_Init();
-	USB_Init();
-
 	/* Disable JTAG debugging */
 	MCUCR |= (1 << JTD);
 	MCUCR |= (1 << JTD);
@@ -189,6 +190,16 @@ void SetupHardware(void)
 	/* Re-enable JTAG debugging */
 	MCUCR &= ~(1 << JTD);
 	MCUCR &= ~(1 << JTD);
+
+	/* Hardware Initialization */
+	SoftUART_Init();
+	LEDs_Init();
+	#if defined(RESET_TOGGLES_LIBUSB_COMPAT)
+	UpdateCurrentCompatibilityMode();
+	#endif
+	
+	/* USB Stack Initialization */	
+	USB_Init();
 }
 
 /** Event handler for the library USB Configuration Changed event. */
@@ -213,13 +224,10 @@ void EVENT_USB_Device_ConfigurationChanged(void)
 	}
 	else
 	{
-		ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
-		                                            AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE);
+		ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
 
-		#if defined(LIBUSB_DRIVER_COMPAT)
-		ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
-		                                            AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE);
-		#endif
+		if ((AVRISP_DATA_IN_EPADDR & ENDPOINT_EPNUM_MASK) != (AVRISP_DATA_OUT_EPADDR & ENDPOINT_EPNUM_MASK))
+		  ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
 
 		/* Configure the V2 protocol packet handler */
 		V2Protocol_Init();
@@ -263,20 +271,22 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
  *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
  *  USB host.
  *
- *  \param[in]  wValue  Descriptor type and index to retrieve
- *  \param[in]  wIndex  Sub-index to retrieve (such as a localized string language)
- *  \param[out] DescriptorAddress  Address of the retrieved descriptor
+ *  \param[in]  wValue                 Descriptor type and index to retrieve
+ *  \param[in]  wIndex                 Sub-index to retrieve (such as a localized string language)
+ *  \param[out] DescriptorAddress      Address of the retrieved descriptor
+ *  \param[out] DescriptorMemorySpace  Memory space that the descriptor is stored in
  *
  *  \return Length of the retrieved descriptor in bytes, or NO_DESCRIPTOR if the descriptor was not found
  */
 uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
                                     const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
+                                    const void** const DescriptorAddress,
+		                            uint8_t* const DescriptorMemorySpace)
 {
 	/* Return the correct descriptors based on the selected mode */
 	if (CurrentFirmwareMode == MODE_USART_BRIDGE)
-	  return USART_GetDescriptor(wValue, wIndex, DescriptorAddress);
+	  return USART_GetDescriptor(wValue, wIndex, DescriptorAddress, DescriptorMemorySpace);
 	else
-	  return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress);
+	  return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress, DescriptorMemorySpace);
 }