X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/f1b6ddb7107fd9534cc6a8d6ab2d46f349d9cdb7..0da99447d3e88e83f9977501bee56af5c7aa56c0:/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h

diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index b4b2b1f97..d85fddc28 100644
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -55,14 +55,14 @@
  *  \code
  *      // Initialize the ADC driver before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
- *
+ *      
  *      // Must setup the ADC channel to read beforehand
  *      ADC_SetupChannel(1);
- *
+ *      
  *      // Perform a single conversion of the ADC channel 1
  *      ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      printf("Conversion Result: %d\r\n", ADC_GetResult());
- *
+ *      
  *      // Start reading ADC channel 1 in free running (continuous conversion) mode
  *      ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      for (;;)
@@ -248,13 +248,13 @@
 				#define ADC_INT_TEMP_SENS           ((1 << 8) | (0x07 << MUX0))
 			#endif
 
-			/** MUX mask define for the internal 1.1V bandgap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
+			/** MUX mask define for the internal 1.1V band-gap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
 			#define ADC_1100MV_BANDGAP              (0x1E << MUX0)
 
 			/** Retrieves the ADC MUX mask for the given ADC channel number.
 			 *
-			 *  \note This macro will only work correctly on channel numbers that are compile-time
-			 *        constants defined by the preprocessor.
+			 *  \attention This macro will only work correctly on channel numbers that are compile-time
+			 *             constants defined by the preprocessor.
 			 *
 			 *  \param[in] Channel  Index of the ADC channel whose MUX mask is to be retrieved.
 			 */
@@ -268,9 +268,8 @@
 			 *
 			 *  \note This must only be called for ADC channels with are connected to a physical port
 			 *        pin of the AVR, denoted by its special alternative function ADCx.
-			 *        \n\n
 			 *
-			 *  \note The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
+			 *  \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
 			 *
 			 *  \param[in] ChannelIndex  ADC channel number to set up for conversions.
 			 */
@@ -311,9 +310,8 @@
 			 *
 			 *  \note This must only be called for ADC channels with are connected to a physical port
 			 *        pin of the AVR, denoted by its special alternative function ADCx.
-			 *        \n\n
 			 *
-			 *  \note The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
+			 *  \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
 			 *
 			 *  \param[in] ChannelIndex  ADC channel number to set up for conversions.
 			 */