X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/f1199200e167a737a4676378da184387e543830c..bb3879331211a19c3adc3927cac870cc7e36b775:/Demos/Host/ClassDriver/MouseHost/MouseHost.h

diff --git a/Demos/Host/ClassDriver/MouseHost/MouseHost.h b/Demos/Host/ClassDriver/MouseHost/MouseHost.h
index 7111218ba..c6b2974bd 100644
--- a/Demos/Host/ClassDriver/MouseHost/MouseHost.h
+++ b/Demos/Host/ClassDriver/MouseHost/MouseHost.h
@@ -40,57 +40,36 @@
 		#include <avr/io.h>
 		#include <avr/wdt.h>
 		#include <avr/pgmspace.h>
-		#include <avr/interrupt.h>
 		#include <avr/power.h>
 		#include <stdio.h>
 
-		#include <LUFA/Version.h>                                // Library Version Information
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>             // ANSI Terminal Escape Codes
-		#include <LUFA/Drivers/USB/USB.h>                        // USB Functionality
-		#include <LUFA/Drivers/Peripheral/SerialStream.h>        // Serial stream driver
-		#include <LUFA/Drivers/Board/LEDs.h>                     // LEDs driver
-		#include <LUFA/Scheduler/Scheduler.h>                    // Simple scheduler for task management
-		
-		#include "ConfigDescriptor.h"
+		#include <LUFA/Version.h>
+		#include <LUFA/Drivers/Misc/TerminalCodes.h>
+		#include <LUFA/Drivers/Peripheral/SerialStream.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/USB/Class/HID.h>
 		
 	/* Macros: */
-		/** Pipe number for the mouse data IN pipe */
-		#define MOUSE_DATAPIPE              1
-		
-		/** HID Class Specific request to set the report protocol mode */
-		#define REQ_SetProtocol             0x0B
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
 
-	/* Type Defines: */
-		/** Type define for a standard Boot Protocol Mouse report */
-		typedef struct
-		{
-			uint8_t Button; /**< Button mask for currently pressed buttons in the mouse */
-			int8_t  X; /**< Current delta X movement of the mouse */
-			int8_t  Y; /**< Current delta Y movement on the mouse */
-		} USB_MouseReport_Data_t;
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
 
-	/* Task Definitions: */
-		TASK(USB_Mouse_Host);
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
 
-	/* Enums: */
-		/** Enum for the possible status codes for passing to the UpdateStatus() function. */
-		enum MouseHost_StatusCodes_t
-		{
-			Status_USBNotReady      = 0, /**< USB is not ready (disconnected from a USB device) */
-			Status_USBEnumerating   = 1, /**< USB interface is enumerating */
-			Status_USBReady         = 2, /**< USB interface is connected and ready */
-			Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
-			Status_HardwareError    = 4, /**< Hardware error while enumerating the attached USB device */
-		};
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
 		
 	/* Function Prototypes: */
-		void EVENT_USB_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_DeviceAttached(void);
-		void EVENT_USB_DeviceUnattached(void);
-		void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
-		void EVENT_USB_DeviceEnumerationComplete(void);
-
-		void UpdateStatus(uint8_t CurrentStatus);
-		void ReadNextReport(void);
+		void SetupHardware(void);
+	
+		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
+		void EVENT_USB_Host_DeviceAttached(void);
+		void EVENT_USB_Host_DeviceUnattached(void);
+		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
+		void EVENT_USB_Host_DeviceEnumerationComplete(void);
 		
 #endif