X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/f1199200e167a737a4676378da184387e543830c..9d2613d90868b59ac48ccce8b652819d5cd388d5:/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h

diff --git a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h
index 6e1e5cd9e..1307a1af2 100644
--- a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h
+++ b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h
@@ -43,36 +43,39 @@
 		#include <avr/power.h>
 		#include <stdio.h>
 		#include <ctype.h>
+		#include <string.h>
 
 		#include "ConfigDescriptor.h"
 
 		#include "Lib/MassStoreCommands.h"
 
-		#include <LUFA/Version.h>                                // Library Version Information
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>             // ANSI Terminal Escape Codes
-		#include <LUFA/Drivers/USB/USB.h>                        // USB Functionality
-		#include <LUFA/Drivers/Peripheral/SerialStream.h>        // Serial stream driver
-		#include <LUFA/Drivers/Board/LEDs.h>                     // LEDs driver
-		#include <LUFA/Drivers/Board/Buttons.h>                  // Board Buttons driver
-		#include <LUFA/Scheduler/Scheduler.h>                    // Simple scheduler for task management
+		#include <LUFA/Version.h>
+		#include <LUFA/Drivers/Misc/TerminalCodes.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Peripheral/SerialStream.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
 
-	/* Enums: */
-		/** Enum for the possible status codes for passing to the UpdateStatus() function. */
-		enum MassStorageHost_StatusCodes_t
-		{
-			Status_USBNotReady      = 0, /**< USB is not ready (disconnected from a USB device) */
-			Status_USBEnumerating   = 1, /**< USB interface is enumerating */
-			Status_USBReady         = 2, /**< USB interface is connected and ready */
-			Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
-			Status_HardwareError    = 4, /**< Hardware error while enumerating the attached USB device */
-			Status_Busy             = 5, /**< Busy reading or writing to the attached Mass Storage device */
-			Status_SCSICommandError = 6, /**< Error sending or receiving a command to or from the attached SCSI device */
-		};
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
 
-	/* Task Definitions: */
-		TASK(USB_MassStore_Host);
-				
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY         (LEDS_LED2)
+		
 	/* Function Prototypes: */
+		void MassStorage_Task(void);
+		void SetupHardware(void);
+	
 		void EVENT_USB_HostError(const uint8_t ErrorCode);
 		void EVENT_USB_DeviceAttached(void);
 		void EVENT_USB_DeviceUnattached(void);
@@ -80,6 +83,5 @@
 		void EVENT_USB_DeviceEnumerationComplete(void);
 
 		void ShowDiskReadError(char* CommandString, bool FailedAtSCSILayer, uint8_t ErrorCode);
-		void UpdateStatus(uint8_t CurrentStatus);		
 
 #endif