X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/f1076ac4d6e56bff7fb6d2126746af1108211370..99abd1a8b7c096baf5ddaff84a8f8fdfb097dfc2:/LUFA/Drivers/USB/Class/Device/HID.h
diff --git a/LUFA/Drivers/USB/Class/Device/HID.h b/LUFA/Drivers/USB/Class/Device/HID.h
index 984078c3e..0c141e62c 100644
--- a/LUFA/Drivers/USB/Class/Device/HID.h
+++ b/LUFA/Drivers/USB/Class/Device/HID.h
@@ -31,6 +31,10 @@
/** \ingroup Group_USBClassHID
* @defgroup Group_USBClassHIDDevice HID Class Device Mode Driver
*
+ * \section Sec_Dependencies Module Source Dependencies
+ * The following files must be built with any user project that uses this module:
+ * - LUFA/Drivers/USB/Class/Device/HID.c
+ *
* \section Module Description
* Device Mode USB Class driver framework interface, for the HID USB Class driver.
*
@@ -64,29 +68,34 @@
uint8_t InterfaceNumber; /**< Interface number of the HID interface within the device */
uint8_t ReportINEndpointNumber; /**< Endpoint number of the HID interface's IN report endpoint */
- uint16_t ReportINEndpointSize; /**< Size in bytes of the HID interface's IN report endpoint */
+ uint16_t ReportINEndpointSize; /**< Size in bytes of the HID interface's IN report endpoint */
- uint8_t ReportINBufferSize; /**< Size of the largest possible report to send to the host, for
- * buffer allocation purposes
- */
+ void* PrevReportINBuffer; /** Pointer to a buffer where the previously created HID input report can be
+ * stored by the driver, for comparison purposes to detect report changes that
+ * must be sent immediately to the host. This should point to a buffer big enough
+ * to hold the largest HID input report sent from the HID interface.
+ */
+ uint8_t PrevReportINBufferSize; /** Size in bytes of the given input report buffer. This is used to create a
+ * second buffer of the same size within the driver so that subsequent reports
+ * can be compared.
+ */
} Config; /**< Config data for the USB class interface within the device. All elements in this section
* must be set or the interface will fail to enumerate and operate correctly.
*/
struct
{
bool UsingReportProtocol; /**< Indicates if the HID interface is set to Boot or Report protocol mode */
- uint16_t IdleCount; /**< Report idle period, in ms, set by the host */
- uint16_t IdleMSRemaining; /**< Total number of ms remaining before the idle period elapsed - this should be
- * decremented by the user application if non-zero each millisecond */
+ uint16_t IdleCount; /**< Report idle period, in mS, set by the host */
+ uint16_t IdleMSRemaining; /**< Total number of mS remaining before the idle period elapsed - this should be
+ * decremented by the user application if non-zero each millisecond */
} State; /**< State data for the USB class interface within the device. All elements in this section
- * may be set to initial values, but may also be ignored to default to sane values when
- * the interface is enumerated.
+ * are reset to their defaults when the interface is enumerated.
*/
} USB_ClassInfo_HID_Device_t;
/* Function Prototypes: */
/** Configures the endpoints of a given HID interface, ready for use. This should be linked to the library
- * \ref EVENT_USB_ConfigurationChanged() event so that the endpoints are configured when the configuration
+ * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration
* containing the given HID interface is selected.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state.
@@ -96,11 +105,11 @@
bool HID_Device_ConfigureEndpoints(USB_ClassInfo_HID_Device_t* HIDInterfaceInfo);
/** Processes incomming control requests from the host, that are directed to the given HID class interface. This should be
- * linked to the library \ref EVENT_USB_UnhandledControlPacket() event.
+ * linked to the library \ref EVENT_USB_Device_UnhandledControlRequest() event.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state.
*/
- void HID_Device_ProcessControlPacket(USB_ClassInfo_HID_Device_t* HIDInterfaceInfo);
+ void HID_Device_ProcessControlRequest(USB_ClassInfo_HID_Device_t* HIDInterfaceInfo);
/** General management task for a given HID class interface, required for the correct operation of the interface. This should
* be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
@@ -109,6 +118,13 @@
*/
void HID_Device_USBTask(USB_ClassInfo_HID_Device_t* HIDInterfaceInfo);
+ /** Indicates that a millisecond of idle time has elapsed on the given HID interface, and the interface's idle count should be
+ * decremented. This should be called once per millisecond so that hardware key-repeats function correctly.
+ *
+ * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state.
+ */
+ void HID_Device_MillisecondElapsed(USB_ClassInfo_HID_Device_t* HIDInterfaceInfo);
+
/** HID class driver callback for the user creation of a HID input report. This callback may fire in response to either
* HID class control requests from the host, or by the normal HID endpoint polling procedure. Inside this callback the
* user is responsible for the creation of the next HID input report to be sent to the host.
@@ -118,11 +134,14 @@
* be set to the report ID of the generated HID input report. If multiple reports are not sent via the
* given HID interface, this parameter should be ignored.
* \param[out] ReportData Pointer to a buffer where the generated HID report should be stored.
+ * \param[out] ReportSize Number of bytes in the generated input report, or zero if no report is to be sent
*
- * \return Number of bytes in the generated input report, or zero if no report is to be sent
+ * \return Boolean true to force the sending of the report even if it is identical to the previous report and still within
+ * the idle period (useful for devices which report relative movement), false otherwise
*/
- uint16_t CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* HIDInterfaceInfo, uint8_t* ReportID, void* ReportData);
-
+ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, uint8_t* const ReportID,
+ void* ReportData, uint16_t* ReportSize);
+
/** HID class driver callback for the user processing of a received HID input report. This callback may fire in response to
* either HID class control requests from the host, or by the normal HID endpoint polling procedure. Inside this callback
* the user is responsible for the processing of the received HID output report from the host.