X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/ed031c1df2f5b053b9cd9f48c63e66a42b7c049e..526e398986583e2fb65c0a36a2fbf2ce153446e5:/Demos/Device/DualCDC/DualCDC.c diff --git a/Demos/Device/DualCDC/DualCDC.c b/Demos/Device/DualCDC/DualCDC.c index 3c598da42..4185a76bd 100644 --- a/Demos/Device/DualCDC/DualCDC.c +++ b/Demos/Device/DualCDC/DualCDC.c @@ -36,18 +36,12 @@ #include "DualCDC.h" -/* Project Tags, for reading out using the ButtLoad project */ -BUTTLOADTAG(ProjName, "LUFA DualCDC App"); -BUTTLOADTAG(BuildTime, __TIME__); -BUTTLOADTAG(BuildDate, __DATE__); -BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING); - /* Scheduler Task List */ TASK_LIST { - { Task: USB_USBTask , TaskStatus: TASK_STOP }, - { Task: CDC1_Task , TaskStatus: TASK_STOP }, - { Task: CDC2_Task , TaskStatus: TASK_STOP }, + { .Task = USB_USBTask , .TaskStatus = TASK_STOP }, + { .Task = CDC1_Task , .TaskStatus = TASK_STOP }, + { .Task = CDC2_Task , .TaskStatus = TASK_STOP }, }; /* Globals: */ @@ -57,12 +51,12 @@ TASK_LIST * * These values are set by the host via a class-specific request, however they are not required to be used accurately. * It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical - * serial link characteristics and instead sends and recieves data in endpoint streams. + * serial link characteristics and instead sends and receives data in endpoint streams. */ -CDC_Line_Coding_t LineCoding1 = { BaudRateBPS: 9600, - CharFormat: OneStopBit, - ParityType: Parity_None, - DataBits: 8 }; +CDC_Line_Coding_t LineCoding1 = { .BaudRateBPS = 9600, + .CharFormat = OneStopBit, + .ParityType = Parity_None, + .DataBits = 8 }; /** Contains the current baud rate and other settings of the second virtual serial port. While this demo does not use * the physical USART and thus does not use these settings, they must still be retained and returned to the host @@ -70,17 +64,17 @@ CDC_Line_Coding_t LineCoding1 = { BaudRateBPS: 9600, * * These values are set by the host via a class-specific request, however they are not required to be used accurately. * It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical - * serial link characteristics and instead sends and recieves data in endpoint streams. + * serial link characteristics and instead sends and receives data in endpoint streams. */ -CDC_Line_Coding_t LineCoding2 = { BaudRateBPS: 9600, - CharFormat: OneStopBit, - ParityType: Parity_None, - DataBits: 8 }; +CDC_Line_Coding_t LineCoding2 = { .BaudRateBPS = 9600, + .CharFormat = OneStopBit, + .ParityType = Parity_None, + .DataBits = 8 }; /** String to print through the first virtual serial port when the joystick is pressed upwards. */ char JoystickUpString[] = "Joystick Up\r\n"; -/** String to print through the first virtual serial port when the joystick is pressed downwards. */ +/** String to print through the first virtual serial port when the joystick is pressed downward. */ char JoystickDownString[] = "Joystick Down\r\n"; /** String to print through the first virtual serial port when the joystick is pressed left. */ @@ -195,7 +189,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) uint8_t* LineCodingData; /* Discard the unused wValue parameter */ - Endpoint_Ignore_Word(); + Endpoint_Discard_Word(); /* wIndex indicates the interface being controlled */ uint16_t wIndex = Endpoint_Read_Word_LE(); @@ -204,45 +198,45 @@ EVENT_HANDLER(USB_UnhandledControlPacket) LineCodingData = (wIndex == 0) ? (uint8_t*)&LineCoding1 : (uint8_t*)&LineCoding2; /* Process CDC specific control requests */ - switch (bRequest) + switch (USB_ControlRequest.bRequest) { case REQ_GetLineEncoding: - if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) { /* Acknowledge the SETUP packet, ready for data transfer */ - Endpoint_ClearSetupReceived(); + Endpoint_ClearSETUP(); /* Write the line coding data to the control endpoint */ Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t)); /* Finalize the stream transfer to send the last packet or clear the host abort */ - Endpoint_ClearSetupOUT(); + Endpoint_ClearOUT(); } break; case REQ_SetLineEncoding: - if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) { /* Acknowledge the SETUP packet, ready for data transfer */ - Endpoint_ClearSetupReceived(); + Endpoint_ClearSETUP(); /* Read the line coding data in from the host into the global struct */ Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t)); /* Finalize the stream transfer to clear the last packet from the host */ - Endpoint_ClearSetupIN(); + Endpoint_ClearIN(); } break; case REQ_SetControlLineState: - if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) { /* Acknowledge the SETUP packet, ready for data transfer */ - Endpoint_ClearSetupReceived(); + Endpoint_ClearSETUP(); /* Acknowledge status stage */ - while (!(Endpoint_IsSetupINReady())); - Endpoint_ClearSetupIN(); + while (!(Endpoint_IsINReady())); + Endpoint_ClearIN(); } break; @@ -313,18 +307,24 @@ TASK(CDC1_Task) Endpoint_Write_Stream_LE(ReportString, strlen(ReportString)); /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearCurrentBank(); + Endpoint_ClearIN(); + + /* Wait until the endpoint is ready for another packet */ + while (!(Endpoint_IsINReady())); + + /* Send an empty packet to ensure that the host does not buffer data sent to it */ + Endpoint_ClearIN(); } /* Select the Serial Rx Endpoint */ Endpoint_SelectEndpoint(CDC1_RX_EPNUM); /* Throw away any received data from the host */ - if (Endpoint_ReadWriteAllowed()) - Endpoint_ClearCurrentBank(); + if (Endpoint_IsOUTReceived()) + Endpoint_ClearOUT(); } -/** Function to manage CDC data transmission and reception to and from the host for the second CDC interface, which echos back +/** Function to manage CDC data transmission and reception to and from the host for the second CDC interface, which echoes back * all data sent to it from the host. */ TASK(CDC2_Task) @@ -333,19 +333,19 @@ TASK(CDC2_Task) Endpoint_SelectEndpoint(CDC2_RX_EPNUM); /* Check to see if any data has been received */ - if (Endpoint_ReadWriteAllowed()) + if (Endpoint_IsOUTReceived()) { - /* Create a temp buffer big enough to hold the incomming endpoint packet */ + /* Create a temp buffer big enough to hold the incoming endpoint packet */ uint8_t Buffer[Endpoint_BytesInEndpoint()]; - /* Remember how large the incomming packet is */ + /* Remember how large the incoming packet is */ uint16_t DataLength = Endpoint_BytesInEndpoint(); - /* Read in the incomming packet into the buffer */ + /* Read in the incoming packet into the buffer */ Endpoint_Read_Stream_LE(&Buffer, DataLength); /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearCurrentBank(); + Endpoint_ClearOUT(); /* Select the Serial Tx Endpoint */ Endpoint_SelectEndpoint(CDC2_TX_EPNUM); @@ -354,6 +354,12 @@ TASK(CDC2_Task) Endpoint_Write_Stream_LE(&Buffer, DataLength); /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearCurrentBank(); + Endpoint_ClearIN(); + + /* Wait until the endpoint is ready for the next packet */ + while (!(Endpoint_IsINReady())); + + /* Send an empty packet to prevent host buffering */ + Endpoint_ClearIN(); } }