X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/ecd82778cf9a53e34f13d9ce6dcd7e1a4cf76b70..d03d6513d0d24cf63225c8d3dfa07675d9107f40:/Bootloaders/CDC/makefile

diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile
index 3c79cb649..f16345945 100644
--- a/Bootloaders/CDC/makefile
+++ b/Bootloaders/CDC/makefile
@@ -51,7 +51,7 @@
 MCU = at90usb1287
 
 
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
 BOARD  = USBKEY
@@ -59,28 +59,21 @@ BOARD  = USBKEY
 
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the 
-#     processor frequency. You can then use this symbol in your source code to 
+#     processor frequency in Hz. You can then use this symbol in your source code to 
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
-#     Typical values are:
-#         F_CPU =  1000000
-#         F_CPU =  1843200
-#         F_CPU =  2000000
-#         F_CPU =  3686400
-#         F_CPU =  4000000
-#         F_CPU =  7372800
-#         F_CPU =  8000000
-#         F_CPU = 11059200
-#         F_CPU = 14745600
-#         F_CPU = 16000000
-#         F_CPU = 18432000
-#         F_CPU = 20000000
+#
+#     This will be an integer division of F_CLOCK below, as it is sourced by
+#     F_CLOCK after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
 F_CPU = 8000000
 
 
 # Input clock frequency.
 #     This will define a symbol, F_CLOCK, in all source code files equal to the 
-#     input clock frequency (before any prescaling is performed). This value may
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
@@ -116,13 +109,14 @@ LUFA_PATH = ../..
 
 # LUFA library compile-time options
 LUFA_OPTS  = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D USE_NONSTANDARD_DESCRIPTOR_NAMES
 LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 LUFA_OPTS += -D USE_RAM_DESCRIPTORS
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 LUFA_OPTS += -D NO_INTERNAL_SERIAL
+LUFA_OPTS += -D NO_DEVICE_SELF_POWER
+LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
 
 
 # List C source files here. (C dependencies are automatically generated.)
@@ -319,9 +313,9 @@ EXTMEMOPTS =
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
 LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)
+LDFLAGS += -Wl,--relax 
+LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
@@ -458,7 +452,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 # Default target.
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
 
 # Change the build target to build a HEX file or a library.
 build: elf hex eep lss sym
@@ -501,14 +495,17 @@ sizeafter:
 	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 	2>/dev/null; echo; fi
 
-showeventhooks: build
-	@echo
-	@echo -------- Unhooked LUFA Events --------
-	@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
-	           cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
-			   echo "(None)"
-	@echo --------------------------------------
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:
+	@make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
 
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
+	@echo
+	@echo Checking for invalid events...
+	@$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
+	                 grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
+	@sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
+	@if test -s InvalidEvents.tmp; then exit 1; fi
+	
 showliboptions:
 	@echo
 	@echo ---- Compile Time Library Options ----
@@ -525,12 +522,12 @@ showtarget:
 	@echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
 	@echo --------------------------------------
 	
+
 # Display compiler version information.
 gccversion : 
 	@$(CC) --version
 
 
-
 # Program the device.  
 program: $(TARGET).hex $(TARGET).eep
 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
@@ -689,9 +686,9 @@ clean_list:
 	$(REMOVE) $(SRC:.c=.s)
 	$(REMOVE) $(SRC:.c=.d)
 	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVE) InvalidEvents.tmp
 	$(REMOVEDIR) .dep
 
-
 doxygen:
 	@echo Generating Project Documentation...
 	@doxygen Doxygen.conf
@@ -709,7 +706,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 
 
 # Listing of phony targets.
-.PHONY : all showeventhooks showliboptions showtarget  \
-begin finish end sizebefore sizeafter gccversion build \
-elf hex eep lss sym coff extcoff program clean debug   \
-clean_list clean_binary gdb-config doxygen
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions    \
+showtarget begin finish end sizebefore sizeafter  \
+gccversion build elf hex eep lss sym coff extcoff \
+program clean debug clean_list clean_binary       \
+gdb-config doxygen
\ No newline at end of file