X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/e572ee7ff271a3f454fcd8a5fb0d2079bbda4be2..0da99447d3e88e83f9977501bee56af5c7aa56c0:/LUFA/Drivers/USB/USB.h
diff --git a/LUFA/Drivers/USB/USB.h b/LUFA/Drivers/USB/USB.h
index fa4fcf1c3..512f7029f 100644
--- a/LUFA/Drivers/USB/USB.h
+++ b/LUFA/Drivers/USB/USB.h
@@ -1,13 +1,13 @@
/*
LUFA Library
- Copyright (C) Dean Camera, 2011.
+ Copyright (C) Dean Camera, 2012.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
- Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
@@ -41,7 +41,7 @@
*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Core/ConfigDescriptor.c (Makefile source module name: LUFA_SRC_USB)
+ * - LUFA/Drivers/USB/Core/ConfigDescriptors.c (Makefile source module name: LUFA_SRC_USB)
* - LUFA/Drivers/USB/Core/DeviceStandardReq.c (Makefile source module name: LUFA_SRC_USB)
* - LUFA/Drivers/USB/Core/Events.c (Makefile source module name: LUFA_SRC_USB)
* - LUFA/Drivers/USB/Core/HostStandardReq.c (Makefile source module name: LUFA_SRC_USB)
@@ -87,17 +87,22 @@
*
*
*
- * | USB Class |
+ * USB Class |
* Device Mode |
* Host Mode |
*
*
- * | Audio |
+ * Android Open Accessory |
+ * No |
+ * Yes |
+ *
+ *
+ * | Audio 1.0 |
* Yes |
* Yes |
*
*
- * | CDC |
+ * CDC-ACM |
* Yes |
* Yes |
*
@@ -153,9 +158,6 @@
* before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters
* for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters.
*
- * The \c State section of the \c USB_ClassInfo_* structures are designed to be controlled by the Class Drivers only for
- * maintaining the Class Driver instance's state, and should not normally be set by the user application.
- *
* The following is an example of a properly initialized instance of the Audio Class Driver structure:
*
* \code
@@ -164,9 +166,12 @@
* .Config =
* {
* .StreamingInterfaceNumber = 1,
- *
- * .DataINEndpointNumber = 1,
- * .DataINEndpointSize = 256,
+ * .DataINEndpoint =
+ * {
+ * .Address = (ENDPOINT_DIR_IN | 1),
+ * .Size = 64,
+ * .Banks = 1,
+ * },
* },
* };
* \endcode
@@ -183,10 +188,10 @@
* \code
* void EVENT_USB_Device_ConfigurationChanged(void)
* {
- * LEDs_SetAllLEDs(LEDMASK_USB_READY);
- *
- * if (!(Audio_Device_ConfigureEndpoints(&My_Audio_Interface)))
- * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ * LEDs_SetAllLEDs(LEDMASK_USB_READY);
+ *
+ * if (!(Audio_Device_ConfigureEndpoints(&My_Audio_Interface)))
+ * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
* }
* \endcode
*
@@ -200,13 +205,14 @@
* int main(void)
* {
* SetupHardware();
- *
+ *
* LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- *
+ *
* for (;;)
* {
- * Create_And_Process_Samples();
- *
+ * if (USB_DeviceState != DEVICE_STATE_Configured)
+ * Create_And_Process_Samples();
+ *
* Audio_Device_USBTask(&My_Audio_Interface);
* USB_USBTask();
* }
@@ -252,27 +258,31 @@
* before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters
* for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters.
*
- * The \c State section of the \c USB_ClassInfo_* structures are designed to be controlled by the Class Drivers only for
- * maintaining the Class Driver instance's state, and should not normally be set by the user application.
- *
- * The following is an example of a properly initialized instance of the MIDI Class Driver structure:
+ * The following is an example of a properly initialized instance of the MIDI Host Class Driver structure:
*
* \code
* USB_ClassInfo_MIDI_Host_t My_MIDI_Interface =
* {
* .Config =
* {
- * .DataINPipeNumber = 1,
- * .DataINPipeDoubleBank = false,
- *
- * .DataOUTPipeNumber = 2,
- * .DataOUTPipeDoubleBank = false,
+ * .DataINPipe =
+ * {
+ * .Address = (PIPE_DIR_IN | 1),
+ * .Size = 64,
+ * .Banks = 1,
+ * },
+ * .DataOUTPipe =
+ * {
+ * .Address = (PIPE_DIR_OUT | 2),
+ * .Size = 64,
+ * .Banks = 1,
+ * },
* },
* };
* \endcode
*
* To initialize the Class driver instance, the driver's {Class Name}_Host_ConfigurePipes() function
- * should be called in response to the host state machine entering the \ref HOST_STATE_Addressed state. This function
+ * should be called in response to the \c EVENT_USB_Host_DeviceEnumerationComplete() event firing. This function will
* will return an error code from the class driver's {Class Name}_EnumerationFailure_ErrorCodes_t enum
* to indicate if the driver successfully initialized the instance and bound it to an interface in the attached device.
* Like all the class driver functions, this function takes in the address of the specific instance you wish to initialize -
@@ -280,40 +290,48 @@
* based Host mode application may look like the following:
*
* \code
- * switch (USB_HostState)
+ * void EVENT_USB_Host_DeviceEnumerationComplete(void)
+ * {
+ * LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+ *
+ * uint16_t ConfigDescriptorSize;
+ * uint8_t ConfigDescriptorData[512];
+ *
+ * if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
+ * sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
* {
- * case HOST_STATE_Addressed:
- * LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
- *
- * uint16_t ConfigDescriptorSize;
- * uint8_t ConfigDescriptorData[512];
- *
- * if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
- * sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
- * {
- * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- * USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- * break;
- * }
- *
- * if (MIDI_Host_ConfigurePipes(&My_MIDI_Interface,
- * ConfigDescriptorSize, ConfigDescriptorData) != MIDI_ENUMERROR_NoError)
- * {
- * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- * USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- * break;
- * }
- *
- * // Other state handler code here
+ * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ * return;
+ * }
+ *
+ * if (MIDI_Host_ConfigurePipes(&Keyboard_MIDI_Interface,
+ * ConfigDescriptorSize, ConfigDescriptorData) != MIDI_ENUMERROR_NoError)
+ * {
+ * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ * return;
+ * }
+ *
+ * if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
+ * {
+ * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ * return;
+ * }
+ *
+ * LEDs_SetAllLEDs(LEDMASK_USB_READY);
+ * }
* \endcode
*
- * Note that the function also required the device's configuration descriptor so that it can determine which interface
+ * Note that the function also requires the device's configuration descriptor so that it can determine which interface
* in the device to bind to - this can be retrieved as shown in the above fragment using the
* \ref USB_Host_GetDeviceConfigDescriptor() function. If the device does not implement the interface the class driver
* is looking for, if all the matching interfaces are already bound to class driver instances or if an error occurs while
* binding to a device interface (for example, a device endpoint bank larger that the maximum supported bank size is used)
* the configuration will fail.
*
+ * To complete the device enumeration after binding the host mode Class Drivers to the attached device, a call to
+ * \c USB_Host_SetDeviceConfiguration() must be made. If the device configuration is not set within the
+ * \c EVENT_USB_Host_DeviceEnumerationComplete() event, the host still will assume the device enumeration has failed.
+ *
* Once initialized, it is important to maintain the class driver's state by repeatedly calling the Class Driver's
* {Class Name}_Host_USBTask() function in the main program loop. The exact implementation of this
* function varies between class drivers, and can be used for any internal class driver purpose to maintain each
@@ -324,16 +342,14 @@
* int main(void)
* {
* SetupHardware();
- *
+ *
* LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- *
+ *
* for (;;)
* {
- * switch (USB_HostState)
- * {
- * // Host state machine handling here
- * }
- *
+ * if (USB_HostState != HOST_STATE_Configured)
+ * Create_And_Process_Samples();
+ *
* MIDI_Host_USBTask(&My_Audio_Interface);
* USB_USBTask();
* }
@@ -366,7 +382,7 @@
#include "Core/USBTask.h"
#include "Core/Events.h"
#include "Core/StdDescriptors.h"
- #include "Core/ConfigDescriptor.h"
+ #include "Core/ConfigDescriptors.h"
#include "Core/USBController.h"
#include "Core/USBInterrupt.h"
@@ -387,15 +403,16 @@
#if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)
#include "Core/OTG.h"
#endif
-
- #include "Class/Audio.h"
- #include "Class/CDC.h"
- #include "Class/HID.h"
- #include "Class/MassStorage.h"
- #include "Class/MIDI.h"
- #include "Class/Printer.h"
- #include "Class/RNDIS.h"
- #include "Class/StillImage.h"
+
+ #include "Class/AndroidAccessoryClass.h"
+ #include "Class/AudioClass.h"
+ #include "Class/CDCClass.h"
+ #include "Class/HIDClass.h"
+ #include "Class/MassStorageClass.h"
+ #include "Class/MIDIClass.h"
+ #include "Class/PrinterClass.h"
+ #include "Class/RNDISClass.h"
+ #include "Class/StillImageClass.h"
#endif