X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/e4f3d9957efee6d2259f3b9f19a26ce0c8bee95d..b1625400998819846288e02a780b2b5ab14da143:/LUFA/ManPages/ChangeLog.txt diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt index 80e56de57..619c67716 100644 --- a/LUFA/ManPages/ChangeLog.txt +++ b/LUFA/ManPages/ChangeLog.txt @@ -9,24 +9,82 @@ * \section Sec_ChangeLogXXXXXX Version XXXXXX * New: * - Core: + * - Added USE_LUFA_CONFIG_HEADER compile time option to include a LUFAConfig.h header in the user director for LUFA configuration + * tokens as an alternative to tokens defined in the project makefile + * - Added new USB_Host_SetInterfaceAltSetting() convenience function for the selection of an interface's alternative setting + * - Added Audio class control request definitions + * - Added new CALLBACK_Audio_Device_GetSetEndpointProperty() callback to the Audio Device Class driver to allow for endpoint control manipulations + * such as data sample rates + * - Added support for the Audio class GET STATUS request in the Audio Device Class driver so that it is correctly ACKed when sent by the host + * - Added new EVENT_Audio_Device_StreamStartStop() event to the Audio Device Class driver to detect stream start/stop events + * - Added board driver support for the Busware TUL board + * - Added new Host mode Audio Class driver + * - Added new SPI_GetCurrentMode() function to the SPI peripheral driver + * - Added board hardware driver support for the EVK1100 board + * - Added board hardware driver support for the EVK1104 board + * - Library Applications: + * - Added RNDIS device mode to the Webserver project + * - Added new incomplete AndroidAccessoryHost Host LowLevel demo + * - Added new HIDReportViewer project + * - Added new MediaControl project + * - Added new AudioInputHost Host ClassDriver demo + * - Added new AudioOutputHost Host ClassDriver demo + * - Added new AudioInputHost Host LowLevel demo + * - Added new AudioOutputHost Host LowLevel demo + * - Added new "checksource" target to all library project makefiles + * + * Changed: + * - Core: + * - Altered the definition of the USB_Audio_Descriptor_Format_t descriptor so that the user is now responsible for supplying + * the supported audio sampling rates, to allow for multiple audio interfaces with different numbers of supported rates and/or + * continuous sample rates + * - Pipe_BoundEndpointNumber() has been renamed to Pipe_GetBoundEndpointAddress(), and now returns the correct endpoint direction + * as part of the endpoint address + * - Library Applications: + * - Modified the Low Level and Class Driver AudioInput and AudioOutput demos to support multiple audio sample rates + * + * Fixed: + * - Core: + * - Large number of documentation and code comment corrections (thanks to Andrey from Microsin.ru) + * - Fixed possibility of the AVR's SPI interface being pulled out of master mode if the /SS pin is a input and pulled low (thanks + * to Andrey from Microsin.ru) + * - Fixed compile error when FIXED_CONTROL_ENDPOINT_SIZE compile time option was disabled, and a USE_*_DESCRIPTORS compile time + * option was not enabled on the AVR8s + * - Fixed lack of C++ compatibility in some internal header files causing compile errors when using LUFA in C++ projects + * - Library Applications: + * - Fixed incorrect signature in the CDC and DFU class bootloaders for the ATMEGA8U2 + * - Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed + * - Fixed compile errors in the incomplete BluetoothHost demo application (thanks to Timo Lindfors) + * + * \section Sec_ChangeLog110528 Version 110528 + * New: + * - Core: * - Added new ORDERED_EP_CONFIG compile time option to restrict endpoint/pipe configuration to ascending order * in exchange for a smaller compiled program binary size * - Added a new general RingBuff.h miscellaneous ring buffer library driver header * - Added new GCC_FORCE_POINTER_ACCESS() macro to correct GCC's mishandling of struct pointer accesses + * - Added new GCC_MEMORY_BARRIER() macro to prevent instruction reordering across boundaries * - Added basic driver example use code to the library documentation - * - Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions + * - Added new Endpoint_Null_Stream() and Pipe_Null_Stream() functions * - Added new ADC_GET_CHANNEL_MASK() convenience macro * - Added new HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors - * - Added new HID_DESCRIPTOR_MOUSE, HID_DESCRIPTOR_KEYBOARD, HID_DESCRIPTOR_JOYSTICK and HID_DESCRIPTOR_VENDOR macros + * - Added new HID_DESCRIPTOR_MOUSE(), HID_DESCRIPTOR_KEYBOARD(), HID_DESCRIPTOR_JOYSTICK() and HID_DESCRIPTOR_VENDOR() macros * for easy automatic creation of basic USB HID device reports * - Added new MAX() and MIN() convenience macros * - Added new Serial_SendData() function to the Serial driver * - Added board driver support for the Sparkfun ATMEGA8U2 breakout board + * - Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus) + * - Internal restructuring for eventual multiple architecture ports + * - Added AVR32 UC3 architecture port (currently incomplete/experimental) + * - Added new architecture independent functions to enable, disable, save and restore the Global Interrupt Enable flags + * - Added new RNDIS Device Class Driver packet send and receive functions * - Library Applications: * - Added ability to write protect Mass Storage disk write operations from the host OS * - Added new MIDIToneGenerator project * - Added new KeyboardMouseMultiReport Device ClassDriver demo + * - Added new VirtualSerialMassStorage Device ClassDriver demo * - Added HID class bootloader, compatible with a modified version of the command line Teensy loader from PJRC.com + * - Added LED flashing to the CDC and DFU class bootloaders to indicate when they are running * * Changed: * - Core: @@ -51,6 +109,16 @@ * - Renamed the PRNT_Host_SendString(), CDC_Host_SendString() and CDC_Device_SendString() functions to *_SendData(), and * added new versions of the *_SendString() routines that expect a null terminated string instead * - Renamed all driver termination *_ShutDown() functions to the more logical name *_Disable() + * - Reduced latency for executing the Start-Of-Frame events (if enabled in the user application) + * - Removed Pipe_ClearErrorFlags(), pipe error flags are now automatically cleared when Pipe_ClearError() is called + * - Endpoint_ResetFIFO() renamed to Endpoint_ResetEndpoint(), to be consistent with the Pipe_ResetPipe() function name + * - Implemented on-demand PLL clock generation for the U4, U6 and U7 series USB AVRs when automatic PLL mode is specified + * - F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports + * - Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of + * a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures + * - Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of + * a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures + * - Separated out board drivers by architecture in the library internals for better organisation * - Library Applications: * - Changed the XPLAINBridge software UART to use the regular timer CTC mode instead of the alternative CTC mode * via the Input Capture register, to reduce user confusion @@ -61,6 +129,8 @@ * - Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition * - Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0 * for other uses + * - Updated the software USART code in the XPLAIN Bridge application so that the incoming bits are sampled at their mid-point + * instead of starting point, to give maximum reliability (thanks to Anton Staaf) * * Fixed: * - Core: @@ -69,12 +139,17 @@ * - Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.) * - Fixed incorrect definition of the HID_KEYBOARD_SC_RIGHT_ARROW constant in the HID class driver (thanks to Joby Taffey) * - Fixed incorrect endpoint initialisation order in the several device demos (thanks to Rick Drolet) - * - Fixed inverted Minimum board LEDs + * - Fixed inverted Minimus board LEDs * - Fixed incorrect byte ordering in the Audio_Device_WriteSample24 function (thanks to WZab) * - Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect * error code enum (thanks to Daniel Seibert) * - Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used - * - Fixed incorect BUTTONS_BUTTON1 definition for the Minimus board + * - Fixed incorrect BUTTONS_BUTTON1 definition for the Minimus board + * - Fixed Still Image Host class driver exiting the descriptor search routine prematurely if the data pipes (but not event pipe) + * is found + * - Fixed missing call to Pipe_SetInfiniteINRequests() in the Pipe_ConfigurePipe() routine + * - Fixed Remote Wakeup broken on the AVRs due to the mechanism only operating when the SUSPI bit is set (thanks to Holger Steinhaus) + * - Fixed possible invalid program execution when in host mode if corrupt descriptor lengths are supplied by the attached device * - Library Applications: * - Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy * - Fixed broken DFU bootloader, added XPLAIN support for bootloader start when XCK jumpered to ground @@ -114,7 +189,7 @@ * - Added board hardware driver support for the Minimus board (thanks to the PSGroove team) * - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management * tasks for each driver is called - * - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda) + * - Added standard keyboard HID report scan-code defines (thanks to Laszlo Monda) * - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions * - Library Applications: * - Added default test tone generation mode to the Device mode AudioInput demos @@ -618,7 +693,7 @@ * - Pipe stream functions now automatically set the correct pipe token, so that bidirectional pipes can be used * - Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling * the existing Pipe_SetFiniteINRequests() function - * - Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case + * - Changed F_USB entries in project makefiles to alias to F_CPU by default, as this is the most common case * - Host mode demos now use sane terminal escape codes, so that text is always readable and events/program output is visually distinguished * from one another using foreground colours * - Internal per-device preprocessing conditions changed to per-device series rather than per-controller group for finer-grain @@ -774,7 +849,7 @@ * - Fixed KeyboardMouse demo discarding the wIndex value in the REQ_GetReport request * - USBtoSerial demo now discards all Rx data when not connected to a USB host, rather than buffering characters for transmission * next time the device is attached to a host. - * - Added new F_CLOCK compile time constant to the library and makefiles, to give the raw input clock (used to feed the PLL before any + * - Added new F_USB compile time constant to the library and makefiles, to give the raw input clock (used to feed the PLL before any * clock prescaling is performed) frequency, so that the PLL prescale mask can be determined * - Changed stream wait timeout counter to be 16-bit, so that very long timeout periods can be set for correct communications with * badly designed hosts or devices which greatly exceed the USB specification limits @@ -958,7 +1033,7 @@ * - Library license changed from LGPLv3 to MIT license * * - * \section Sec_ChangeLog151 Version 1.5.1 - Released 31st July, 2008 + * \section Sec_ChangeLog151 Version 1.5.1 - Released 7th July, 2008 * * - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event * rather than the USB_DeviceAttached event @@ -1037,7 +1112,7 @@ * - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names * * - * \section Sec_ChangeLog141 Version 1.4.1 - Released 5 May, 2008 + * \section Sec_ChangeLog141 Version 1.4.1 - Released 19 May, 2008 * * - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo * - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly