X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/e331b531c6e6d93eb0eee42b9002074e8090ad18..071e02c6b6b4837fa9cf0b6d4c749994e02638d7:/Projects/XPLAINBridge/XPLAINBridge.c?ds=inline diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c index 5457a2283..5d7605206 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.c +++ b/Projects/XPLAINBridge/XPLAINBridge.c @@ -1,240 +1,240 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2010. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the XPLAINBridge project. This file contains the main tasks of - * the demo and is responsible for the initial application hardware configuration. - */ - -#include "XPLAINBridge.h" - -/* Current firmware mode, making the device behave as either a programmer or a USART bridge */ -bool CurrentFirmwareMode = MODE_PDI_PROGRAMMER; - -/** LUFA CDC Class driver interface configuration and state information. This structure is - * passed to all CDC Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = - { - .Config = - { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = true, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = true, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, - }, - }; - -/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */ -RingBuff_t USBtoUART_Buffer; - -/** Circular buffer to hold data from the serial port before it is sent to the host. */ -RingBuff_t UARTtoUSB_Buffer; - - -/** Main program entry point. This routine contains the overall program flow, including initial - * setup of all components and the main program loop. - */ -int main(void) -{ - SetupHardware(); - - Buffer_Initialize(&USBtoUART_Buffer); - Buffer_Initialize(&UARTtoUSB_Buffer); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - sei(); - - for (;;) - { - if (CurrentFirmwareMode == MODE_USART_BRIDGE) - USARTBridge_Task(); - else - AVRISP_Task(); - - USB_USBTask(); - } -} - -void AVRISP_Task(void) -{ - /* Must be in the configured state for the AVRISP code to process data */ - if (USB_DeviceState != DEVICE_STATE_Configured) - return; - - Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM); - - /* Check to see if a V2 Protocol command has been received */ - if (Endpoint_IsOUTReceived()) - { - LEDs_SetAllLEDs(LEDMASK_BUSY); - - /* Pass off processing of the V2 Protocol command to the V2 Protocol handler */ - V2Protocol_ProcessCommand(); - - LEDs_SetAllLEDs(LEDMASK_USB_READY); - } -} - -void USARTBridge_Task(void) -{ - /* Must be in the configured state for the USART Bridge code to process data */ - if (USB_DeviceState != DEVICE_STATE_Configured) - return; - - /* Read bytes from the USB OUT endpoint into the UART transmit buffer */ - for (uint8_t DataBytesRem = CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface); DataBytesRem != 0; DataBytesRem--) - { - if (!(BUFF_STATICSIZE - USBtoUART_Buffer.Elements)) - break; - - Buffer_StoreElement(&USBtoUART_Buffer, CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface)); - } - - /* Read bytes from the UART receive buffer into the USB IN endpoint */ - if (UARTtoUSB_Buffer.Elements) - CDC_Device_SendByte(&VirtualSerial_CDC_Interface, Buffer_GetElement(&UARTtoUSB_Buffer)); - - /* Load bytes from the UART transmit buffer into the UART */ - if ((USBtoUART_Buffer.Elements) && SoftUART_IsReady()) - SoftUART_TxByte(Buffer_GetElement(&USBtoUART_Buffer)); - - /* Load bytes from the UART into the UART receive buffer */ - if (SoftUART_IsReceived()) - Buffer_StoreElement(&UARTtoUSB_Buffer, SoftUART_RxByte()); - - CDC_Device_USBTask(&VirtualSerial_CDC_Interface); -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - /* Hardware Initialization */ - SoftUART_Init(); - LEDs_Init(); - USB_Init(); - V2Protocol_Init(); - - /* Disable JTAG debugging */ - MCUCR |= (1 << JTD); - MCUCR |= (1 << JTD); - - /* Enable pullup on the JTAG TDI pin so we can use it to select the mode */ - PORTF |= (1 << 7); - _delay_ms(10); - - /* Select the firmware mode based on the JTD pin's value */ - CurrentFirmwareMode = (PINF & (1 << 7)) ? MODE_USART_BRIDGE : MODE_PDI_PROGRAMMER; - - /* Re-enable JTAG debugging */ - MCUCR &= ~(1 << JTD); - MCUCR &= ~(1 << JTD); -} - -/** Event handler for the library USB Configuration Changed event. */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - bool EndpointConfigSuccess = true; - - /* Configure the device endpoints according to the selected mode */ - if (CurrentFirmwareMode == MODE_USART_BRIDGE) - { - EndpointConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface); - } - else - { - EndpointConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK, - ENDPOINT_DIR_OUT, AVRISP_DATA_EPSIZE, - ENDPOINT_BANK_SINGLE); - - #if defined(LIBUSB_FILTERDRV_COMPAT) - EndpointConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, - ENDPOINT_DIR_IN, AVRISP_DATA_EPSIZE, - ENDPOINT_BANK_SINGLE); - #endif - } - - if (EndpointConfigSuccess) - LEDs_SetAllLEDs(LEDMASK_USB_READY); - else - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); -} - -/** Event handler for the library USB Unhandled Control Request event. */ -void EVENT_USB_Device_UnhandledControlRequest(void) -{ - if (CurrentFirmwareMode == MODE_USART_BRIDGE) - CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); -} - -/** Event handler for the library USB Connection event. */ -void EVENT_USB_Device_Connect(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the library USB Disconnection event. */ -void EVENT_USB_Device_Disconnect(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" - * documentation) by the application code so that the address and size of a requested descriptor can be given - * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function - * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the - * USB host. - */ -uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress) -{ - /* Return the correct descriptors based on the selected mode */ - if (CurrentFirmwareMode == MODE_USART_BRIDGE) - return USART_GetDescriptor(wValue, wIndex, DescriptorAddress); - else - return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress); -} +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the XPLAINBridge project. This file contains the main tasks of + * the demo and is responsible for the initial application hardware configuration. + */ + +#include "XPLAINBridge.h" + +/* Current firmware mode, making the device behave as either a programmer or a USART bridge */ +bool CurrentFirmwareMode = MODE_PDI_PROGRAMMER; + +/** LUFA CDC Class driver interface configuration and state information. This structure is + * passed to all CDC Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. + */ +USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = + { + .Config = + { + .ControlInterfaceNumber = 0, + + .DataINEndpointNumber = CDC_TX_EPNUM, + .DataINEndpointSize = CDC_TXRX_EPSIZE, + .DataINEndpointDoubleBank = true, + + .DataOUTEndpointNumber = CDC_RX_EPNUM, + .DataOUTEndpointSize = CDC_TXRX_EPSIZE, + .DataOUTEndpointDoubleBank = true, + + .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, + .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, + .NotificationEndpointDoubleBank = false, + }, + }; + +/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */ +RingBuff_t USBtoUART_Buffer; + +/** Circular buffer to hold data from the serial port before it is sent to the host. */ +RingBuff_t UARTtoUSB_Buffer; + + +/** Main program entry point. This routine contains the overall program flow, including initial + * setup of all components and the main program loop. + */ +int main(void) +{ + SetupHardware(); + + Buffer_Initialize(&USBtoUART_Buffer); + Buffer_Initialize(&UARTtoUSB_Buffer); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + sei(); + + for (;;) + { + if (CurrentFirmwareMode == MODE_USART_BRIDGE) + USARTBridge_Task(); + else + AVRISP_Task(); + + USB_USBTask(); + } +} + +void AVRISP_Task(void) +{ + /* Must be in the configured state for the AVRISP code to process data */ + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM); + + /* Check to see if a V2 Protocol command has been received */ + if (Endpoint_IsOUTReceived()) + { + LEDs_SetAllLEDs(LEDMASK_BUSY); + + /* Pass off processing of the V2 Protocol command to the V2 Protocol handler */ + V2Protocol_ProcessCommand(); + + LEDs_SetAllLEDs(LEDMASK_USB_READY); + } +} + +void USARTBridge_Task(void) +{ + /* Must be in the configured state for the USART Bridge code to process data */ + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + /* Read bytes from the USB OUT endpoint into the UART transmit buffer */ + for (uint8_t DataBytesRem = CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface); DataBytesRem != 0; DataBytesRem--) + { + if (!(BUFF_STATICSIZE - USBtoUART_Buffer.Elements)) + break; + + Buffer_StoreElement(&USBtoUART_Buffer, CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface)); + } + + /* Read bytes from the UART receive buffer into the USB IN endpoint */ + if (UARTtoUSB_Buffer.Elements) + CDC_Device_SendByte(&VirtualSerial_CDC_Interface, Buffer_GetElement(&UARTtoUSB_Buffer)); + + /* Load bytes from the UART transmit buffer into the UART */ + if ((USBtoUART_Buffer.Elements) && SoftUART_IsReady()) + SoftUART_TxByte(Buffer_GetElement(&USBtoUART_Buffer)); + + /* Load bytes from the UART into the UART receive buffer */ + if (SoftUART_IsReceived()) + Buffer_StoreElement(&UARTtoUSB_Buffer, SoftUART_RxByte()); + + CDC_Device_USBTask(&VirtualSerial_CDC_Interface); +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + /* Hardware Initialization */ + SoftUART_Init(); + LEDs_Init(); + USB_Init(); + V2Protocol_Init(); + + /* Disable JTAG debugging */ + MCUCR |= (1 << JTD); + MCUCR |= (1 << JTD); + + /* Enable pullup on the JTAG TDI pin so we can use it to select the mode */ + PORTF |= (1 << 7); + _delay_ms(10); + + /* Select the firmware mode based on the JTD pin's value */ + CurrentFirmwareMode = (PINF & (1 << 7)) ? MODE_USART_BRIDGE : MODE_PDI_PROGRAMMER; + + /* Re-enable JTAG debugging */ + MCUCR &= ~(1 << JTD); + MCUCR &= ~(1 << JTD); +} + +/** Event handler for the library USB Configuration Changed event. */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + bool EndpointConfigSuccess = true; + + /* Configure the device endpoints according to the selected mode */ + if (CurrentFirmwareMode == MODE_USART_BRIDGE) + { + EndpointConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface); + } + else + { + EndpointConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK, + ENDPOINT_DIR_OUT, AVRISP_DATA_EPSIZE, + ENDPOINT_BANK_SINGLE); + + #if defined(LIBUSB_FILTERDRV_COMPAT) + EndpointConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, + ENDPOINT_DIR_IN, AVRISP_DATA_EPSIZE, + ENDPOINT_BANK_SINGLE); + #endif + } + + if (EndpointConfigSuccess) + LEDs_SetAllLEDs(LEDMASK_USB_READY); + else + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); +} + +/** Event handler for the library USB Unhandled Control Request event. */ +void EVENT_USB_Device_UnhandledControlRequest(void) +{ + if (CurrentFirmwareMode == MODE_USART_BRIDGE) + CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); +} + +/** Event handler for the library USB Connection event. */ +void EVENT_USB_Device_Connect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the library USB Disconnection event. */ +void EVENT_USB_Device_Disconnect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress) +{ + /* Return the correct descriptors based on the selected mode */ + if (CurrentFirmwareMode == MODE_USART_BRIDGE) + return USART_GetDescriptor(wValue, wIndex, DescriptorAddress); + else + return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress); +}