X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/e331b531c6e6d93eb0eee42b9002074e8090ad18..071e02c6b6b4837fa9cf0b6d4c749994e02638d7:/Demos/Host/LowLevel/PrinterHost/PrinterHost.c diff --git a/Demos/Host/LowLevel/PrinterHost/PrinterHost.c b/Demos/Host/LowLevel/PrinterHost/PrinterHost.c index a2c9fd863..b6f3efae3 100644 --- a/Demos/Host/LowLevel/PrinterHost/PrinterHost.c +++ b/Demos/Host/LowLevel/PrinterHost/PrinterHost.c @@ -1,251 +1,251 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2010. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the PrinterHost demo. This file contains the main tasks of - * the demo and is responsible for the initial application hardware configuration. - */ - -#include "PrinterHost.h" - -/** Main program entry point. This routine configures the hardware required by the application, then - * enters a loop to run the application tasks in sequence. - */ -int main(void) -{ - SetupHardware(); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - - puts_P(PSTR(ESC_FG_CYAN "Printer Host Demo running.\r\n" ESC_FG_WHITE)); - sei(); - - for (;;) - { - USB_Printer_Host(); - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - /* Hardware Initialization */ - SerialStream_Init(9600, false); - LEDs_Init(); - USB_Init(); -} - -/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and - * starts the library USB task to begin the enumeration and USB management process. - */ -void EVENT_USB_Host_DeviceAttached(void) -{ - puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE)); - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and - * stops the library USB task management process. - */ -void EVENT_USB_Host_DeviceUnattached(void) -{ - puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE)); - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully - * enumerated by the host and is now ready to be used by the application. - */ -void EVENT_USB_Host_DeviceEnumerationComplete(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_READY); -} - -/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ -void EVENT_USB_Host_HostError(uint8_t ErrorCode) -{ - USB_ShutDown(); - - printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n" - " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - for(;;); -} - -/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while - * enumerating an attached USB device. - */ -void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode) -{ - printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n" - " -- Error Code %d\r\n" - " -- Sub Error Code %d\r\n" - " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); -} - -/** Task to set the configuration of the attached device after it has been enumerated, and to send some test page - * data to the attached printer. - */ -void USB_Printer_Host(void) -{ - uint8_t ErrorCode; - - switch (USB_HostState) - { - case HOST_STATE_Addressed: - puts_P(PSTR("Getting Config Data.\r\n")); - - /* Select the control pipe for the request transfer */ - Pipe_SelectPipe(PIPE_CONTROLPIPE); - - /* Get and process the configuration descriptor data */ - if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) - { - if (ErrorCode == ControlError) - puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n")); - else - puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); - - printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); - - /* Indicate error via status LEDs */ - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - - /* Wait until USB device disconnected */ - USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; - } - - /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ - if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) - { - printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n" - " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - - /* Indicate error via status LEDs */ - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - - /* Wait until USB device disconnected */ - USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; - } - - /* Some printers use alternate settings to determine the communication protocol used - if so, send a SetInterface - * request to switch to the interface alternate setting with the Bidirectional protocol */ - if (PrinterAltSetting) - { - USB_ControlRequest = (USB_Request_Header_t) - { - .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE), - .bRequest = REQ_SetInterface, - .wValue = PrinterAltSetting, - .wIndex = PrinterInterfaceNumber, - .wLength = 0, - }; - - if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) - { - printf_P(PSTR(ESC_FG_RED "Control Error (Set Interface).\r\n" - " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - - /* Indicate error via status LEDs */ - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - - /* Wait until USB device disconnected */ - USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; - } - } - - puts_P(PSTR("Retrieving Device ID...\r\n")); - - char DeviceIDString[300]; - if ((ErrorCode = Printer_GetDeviceID(DeviceIDString, sizeof(DeviceIDString))) != HOST_SENDCONTROL_Successful) - { - printf_P(PSTR(ESC_FG_RED "Control Error (Get Device ID).\r\n" - " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - - /* Indicate error via status LEDs */ - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - - /* Wait until USB device disconnected */ - USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; - } - - printf_P(PSTR("Printer Device ID: %s\r\n"), DeviceIDString); - - puts_P(PSTR("Printer Enumerated.\r\n")); - - USB_HostState = HOST_STATE_Configured; - break; - case HOST_STATE_Configured: - /* Indicate device busy via the status LEDs */ - LEDs_SetAllLEDs(LEDMASK_USB_BUSY); - - char TestPageData[] = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X"; - uint16_t TestPageLength = strlen(TestPageData); - - printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength); - - if ((ErrorCode = Printer_SendData(&TestPageData, TestPageLength)) != PIPE_RWSTREAM_NoError) - { - printf_P(PSTR(ESC_FG_RED "Error Sending Test Page.\r\n" - " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - - /* Indicate error via status LEDs */ - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - - /* Wait until USB device disconnected */ - USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; - } - - puts_P(PSTR("Test Page Sent.\r\n")); - - /* Indicate device no longer busy */ - LEDs_SetAllLEDs(LEDMASK_USB_READY); - - USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; - } -} +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the PrinterHost demo. This file contains the main tasks of + * the demo and is responsible for the initial application hardware configuration. + */ + +#include "PrinterHost.h" + +/** Main program entry point. This routine configures the hardware required by the application, then + * enters a loop to run the application tasks in sequence. + */ +int main(void) +{ + SetupHardware(); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + + puts_P(PSTR(ESC_FG_CYAN "Printer Host Demo running.\r\n" ESC_FG_WHITE)); + sei(); + + for (;;) + { + USB_Printer_Host(); + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + /* Hardware Initialization */ + SerialStream_Init(9600, false); + LEDs_Init(); + USB_Init(); +} + +/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and + * starts the library USB task to begin the enumeration and USB management process. + */ +void EVENT_USB_Host_DeviceAttached(void) +{ + puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE)); + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and + * stops the library USB task management process. + */ +void EVENT_USB_Host_DeviceUnattached(void) +{ + puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE)); + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully + * enumerated by the host and is now ready to be used by the application. + */ +void EVENT_USB_Host_DeviceEnumerationComplete(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_READY); +} + +/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ +void EVENT_USB_Host_HostError(uint8_t ErrorCode) +{ + USB_ShutDown(); + + printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n" + " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + for(;;); +} + +/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while + * enumerating an attached USB device. + */ +void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode) +{ + printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n" + " -- Error Code %d\r\n" + " -- Sub Error Code %d\r\n" + " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); +} + +/** Task to set the configuration of the attached device after it has been enumerated, and to send some test page + * data to the attached printer. + */ +void USB_Printer_Host(void) +{ + uint8_t ErrorCode; + + switch (USB_HostState) + { + case HOST_STATE_Addressed: + puts_P(PSTR("Getting Config Data.\r\n")); + + /* Select the control pipe for the request transfer */ + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + /* Get and process the configuration descriptor data */ + if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) + { + if (ErrorCode == ControlError) + puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n")); + else + puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); + + printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); + + /* Indicate error via status LEDs */ + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + + /* Wait until USB device disconnected */ + USB_HostState = HOST_STATE_WaitForDeviceRemoval; + break; + } + + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ + if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) + { + printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n" + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + /* Indicate error via status LEDs */ + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + + /* Wait until USB device disconnected */ + USB_HostState = HOST_STATE_WaitForDeviceRemoval; + break; + } + + /* Some printers use alternate settings to determine the communication protocol used - if so, send a SetInterface + * request to switch to the interface alternate setting with the Bidirectional protocol */ + if (PrinterAltSetting) + { + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE), + .bRequest = REQ_SetInterface, + .wValue = PrinterAltSetting, + .wIndex = PrinterInterfaceNumber, + .wLength = 0, + }; + + if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) + { + printf_P(PSTR(ESC_FG_RED "Control Error (Set Interface).\r\n" + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + /* Indicate error via status LEDs */ + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + + /* Wait until USB device disconnected */ + USB_HostState = HOST_STATE_WaitForDeviceRemoval; + break; + } + } + + puts_P(PSTR("Retrieving Device ID...\r\n")); + + char DeviceIDString[300]; + if ((ErrorCode = Printer_GetDeviceID(DeviceIDString, sizeof(DeviceIDString))) != HOST_SENDCONTROL_Successful) + { + printf_P(PSTR(ESC_FG_RED "Control Error (Get Device ID).\r\n" + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + /* Indicate error via status LEDs */ + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + + /* Wait until USB device disconnected */ + USB_HostState = HOST_STATE_WaitForDeviceRemoval; + break; + } + + printf_P(PSTR("Printer Device ID: %s\r\n"), DeviceIDString); + + puts_P(PSTR("Printer Enumerated.\r\n")); + + USB_HostState = HOST_STATE_Configured; + break; + case HOST_STATE_Configured: + /* Indicate device busy via the status LEDs */ + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); + + char TestPageData[] = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X"; + uint16_t TestPageLength = strlen(TestPageData); + + printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength); + + if ((ErrorCode = Printer_SendData(&TestPageData, TestPageLength)) != PIPE_RWSTREAM_NoError) + { + printf_P(PSTR(ESC_FG_RED "Error Sending Test Page.\r\n" + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + /* Indicate error via status LEDs */ + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + + /* Wait until USB device disconnected */ + USB_HostState = HOST_STATE_WaitForDeviceRemoval; + break; + } + + puts_P(PSTR("Test Page Sent.\r\n")); + + /* Indicate device no longer busy */ + LEDs_SetAllLEDs(LEDMASK_USB_READY); + + USB_HostState = HOST_STATE_WaitForDeviceRemoval; + break; + } +}