X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/e071f3897a0946c6be1e1b5e1f78eda8dcbf6fc7..f7ab433c67b86723385ec05ee9c7b96dd18e6dde:/Bootloaders/TeensyHID/TeensyHID.c?ds=inline

diff --git a/Bootloaders/TeensyHID/TeensyHID.c b/Bootloaders/TeensyHID/TeensyHID.c
index eed709783..f3d86a66f 100644
--- a/Bootloaders/TeensyHID/TeensyHID.c
+++ b/Bootloaders/TeensyHID/TeensyHID.c
@@ -33,10 +33,8 @@
  *  Main source file for the TeensyHID bootloader. This file contains the complete bootloader logic.
  */
  
-#define  INCLUDE_FROM_TEENSYHID_C
 #include "TeensyHID.h"
 
-/* Global Variables: */
 /** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run
  *  via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application
  *  started via a forced watchdog reset.
@@ -54,9 +52,6 @@ int main(void)
 	
 	while (RunBootloader)
 	  USB_USBTask();
-	
-	/* Reset all configured hardware to their default states for the user app */
-	ResetHardware();
 
 	/* Wait 100ms to give the host time to register the disconnection */
 	_delay_ms(100);
@@ -85,17 +80,10 @@ void SetupHardware(void)
 	USB_Init();
 }
 
-/** Resets all configured hardware required for the bootloader back to their original states. */
-void ResetHardware(void)
-{
-	/* Shut down the USB subsystem */
-	USB_ShutDown();
-}
-
 /** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready
  *  to relay data to and from the attached USB host.
  */
-void EVENT_USB_ConfigurationChanged(void)
+void EVENT_USB_Device_ConfigurationChanged(void)
 {
 	/* Setup HID Report Endpoint */
 	Endpoint_ConfigureEndpoint(HID_EPNUM, EP_TYPE_INTERRUPT,
@@ -103,11 +91,11 @@ void EVENT_USB_ConfigurationChanged(void)
 	                           ENDPOINT_BANK_SINGLE);
 }
 
-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
+/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific
  *  control requests that are not handled internally by the USB library (including the HID commands, which are
  *  all issued via the control endpoint), so that they can be handled appropriately for the application.
  */
-void EVENT_USB_UnhandledControlPacket(void)
+void EVENT_USB_Device_UnhandledControlRequest(void)
 {
 	/* Handle HID Class specific requests */
 	switch (USB_ControlRequest.bRequest)