X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/df366e055d7c3831bd40d96efe3a91cdeb31e2dd..3642ea0b9715cdf0196b10c9fc97898940eaefa6:/Bootloaders/Printer/BootloaderPrinter.c

diff --git a/Bootloaders/Printer/BootloaderPrinter.c b/Bootloaders/Printer/BootloaderPrinter.c
index 716a23a1f..aaf3ef1cc 100644
--- a/Bootloaders/Printer/BootloaderPrinter.c
+++ b/Bootloaders/Printer/BootloaderPrinter.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2014.
+     Copyright (C) Dean Camera, 2015.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2015  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -123,11 +123,11 @@ void Application_Jump_Check(void)
 
 	#if (BOARD == BOARD_LEONARDO)
 		/* Enable pull-up on the IO13 pin so we can use it to select the mode */
-		PORTC |=  (1 << 7);
+		PORTC |= (1 << 7);
 		Delay_MS(10);
 
 		/* If IO13 is not jumpered to ground, start the user application instead */
-		JumpToApplication |= ((PINC & (1 << 7)) != 0);
+		JumpToApplication = ((PINC & (1 << 7)) != 0);
 
 		/* Disable pull-up after the check has completed */
 		PORTC &= ~(1 << 7);
@@ -140,25 +140,41 @@ void Application_Jump_Check(void)
 		Delay_MS(10);
 
 		/* If the TCK pin is not jumpered to ground, start the user application instead */
-		JumpToApplication |= ((PINF & (1 << 4)) != 0);
+		JumpToApplication = ((PINF & (1 << 4)) != 0);
 
 		/* Re-enable JTAG debugging */
 		JTAG_ENABLE();
-	#endif
+	#else
+		/* Check if the device's BOOTRST fuse is set */
+		if (boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS) & FUSE_BOOTRST)
+		{
+			/* If the reset source was not an external reset or the key is correct, clear it and jump to the application */
+			if (!(MCUSR & (1 << EXTRF)) || (MagicBootKey == MAGIC_BOOT_KEY))
+			  JumpToApplication = true;
 
-	/* If the reset source was the bootloader and the key is correct, clear it and jump to the application */
-	if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY))
-	  JumpToApplication |= true;
+			/* Clear reset source */
+			MCUSR &= ~(1 << EXTRF);
+		}
+		else
+		{
+			/* If the reset source was the bootloader and the key is correct, clear it and jump to the application;
+			 * this can happen in the HWBE fuse is set, and the HBE pin is low during the watchdog reset */
+			if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY))
+				JumpToApplication = true;
+
+			/* Clear reset source */
+			MCUSR &= ~(1 << WDRF);
+		}
+	#endif
 
 	/* Don't run the user application if the reset vector is blank (no app loaded) */
-	if (pgm_read_word_near(0) == 0xFFFF)
-	  JumpToApplication = false;
+	bool ApplicationValid = (pgm_read_word_near(0) != 0xFFFF);
 
 	/* If a request has been made to jump to the user application, honor it */
-	if (JumpToApplication)
+	if (JumpToApplication && ApplicationValid)
 	{
 		/* Turn off the watchdog */
-		MCUSR &= ~(1<<WDRF);
+		MCUSR &= ~(1 << WDRF);
 		wdt_disable();
 
 		/* Clear the boot key and jump to the user application */