X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/dc68de15b69c2064b1b14d00659aa91054cccbe1..7a1033025bbf0dcf4e4dc770fccb4edea86144a4:/Projects/Benito/Benito.txt diff --git a/Projects/Benito/Benito.txt b/Projects/Benito/Benito.txt index 128fba37c..f1a4f6acd 100644 --- a/Projects/Benito/Benito.txt +++ b/Projects/Benito/Benito.txt @@ -1,100 +1,106 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Benito Arduino Programmer Project - * - * \section SSec_Compat Demo Compatibility: - * - * The following list indicates what microcontrollers are compatible with this demo. - * - * - Series 7 USB AVRs - * - Series 6 USB AVRs - * - Series 4 USB AVRs - * - Series 2 USB AVRs - * - * \section SSec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this demo. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class StandardArduino Bootloader Specification
Usable Speeds:Full Speed Mode
- * - * \section SSec_Description Project Description: - * - * Firmware for a USB AVR powered programmer for Arduino boards using the official Arduino bootloader. This - * project acts like a regular USB to Serial bridge, except that asserting the DTR line will cause a pulse - * to appear on a given port pin, to control the target's /RESET pin. - * - * This is primarily designed to fit the Benito board from www.dorkbotpdx.org, but will suit all USB AVRs. - * - * After running this project for the first time on a new computer, you will need to supply the .INF file located - * in this project's directory as the device's driver when running under Windows. This will enable Windows to use - * its inbuilt CDC drivers, negating the need for custom drivers for the device. Other Operating Systems should - * automatically use their own inbuilt CDC-ACM drivers. - * - * \section SSec_Options Project Options - * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Define Name:Location:Description:
AVR_RESET_LINE_PORTMakefile CDEFSIndicates the PORT register of the pin used to generate the target /RESET line pulse.
AVR_RESET_LINE_DDRMakefile CDEFSIndicates the DDR register of the pin used to generate the target /RESET line pulse.
AVR_RESET_LINE_MASKMakefile CDEFSIndicates the mask of the pin used to generate the target /RESET line pulse.
AVR_RESET_PULSE_MSMakefile CDEFSPulse length in milliseconds for the target /RESET pulse.
TX_RX_LED_PULSE_MSMakefile CDEFSPulse length in milliseconds for the activity Tx/Rx LEDs.
PING_PONG_LED_PULSE_MSMakefile CDEFSPulse length in milliseconds for the enumeration LED ping-poning between toggles.
- */ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Benito Arduino Programmer Project + * + * \section Sec_Compat Project Compatibility: + * + * The following list indicates what microcontrollers are compatible with this project. + * + * - Series 7 USB AVRs (AT90USBxxx7) + * - Series 6 USB AVRs (AT90USBxxx6) + * - Series 4 USB AVRs (ATMEGAxxU4) + * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this project. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard \n + * Arduino Bootloader Specification
Usable Speeds:Full Speed Mode
+ * + * \section Sec_Description Project Description: + * + * Firmware for a USB AVR powered programmer for Arduino boards using the official Arduino bootloader. This + * project acts like a regular USB to Serial bridge, except that asserting the DTR line will cause a pulse + * to appear on a given port pin, to control the target's /RESET pin. + * + * This is primarily designed to fit the Benito board from www.dorkbotpdx.org, but will suit all USB AVRs. + * + * After running this project for the first time on a new computer, you will need to supply the .INF file located + * in this project's directory as the device's driver when running under Windows. This will enable Windows to use + * its inbuilt CDC drivers, negating the need for custom drivers for the device. Other Operating Systems should + * automatically use their own inbuilt CDC-ACM drivers. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
Define Name:Location:Description:
AVR_RESET_LINE_PORTMakefile LUFA_OPTSIndicates the PORT register of the pin used to generate the target /RESET line pulse.
AVR_RESET_LINE_DDRMakefile LUFA_OPTSIndicates the DDR register of the pin used to generate the target /RESET line pulse.
AVR_RESET_LINE_MASKMakefile LUFA_OPTSIndicates the mask of the pin used to generate the target /RESET line pulse.
AVR_RESET_PULSE_MSMakefile LUFA_OPTSPulse length in milliseconds for the target /RESET pulse.
TX_RX_LED_PULSE_MSMakefile LUFA_OPTSPulse length in milliseconds for the activity Tx/Rx LEDs.
PING_PONG_LED_PULSE_MSMakefile LUFA_OPTSPulse length in milliseconds for the enumeration LED ping-ponging between toggles.
RECEIVE_BUFFER_FLUSH_MSMakefile LUFA_OPTSPeriod between flushings of received data buffer to the attached USB host.
+ */ +