X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/dc68de15b69c2064b1b14d00659aa91054cccbe1..75d440ace31c326dc80c84c3d346a425f43f1dd6:/Demos/Device/ClassDriver/MassStorage/MassStorage.txt diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt index 6b0a32733..3489ca033 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt @@ -1,92 +1,92 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Mass Storage Device Demo - * - * \section SSec_Compat Demo Compatibility: - * - * The following list indicates what microcontrollers are compatible with this demo. - * - * - Series 7 USB AVRs - * - Series 6 USB AVRs - * - Series 4 USB AVRs - * - Series 2 USB AVRs - * - * \section SSec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this demo. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Device
USB Class:Mass Storage Device
USB Subclass:Bulk-Only Transport
Relevant Standards:USBIF Mass Storage StandardUSB Bulk-Only Transport StandardSCSI Primary Commands SpecificationSCSI Block Commands Specification
Usable Speeds:Full Speed Mode
- * - * \section SSec_Description Project Description: - * - * Dual LUN Mass Storage demonstration application. This gives a simple - * reference application for implementing a multiple LUN USB Mass Storage - * device using the basic USB UFI drivers in all modern OSes (i.e. no - * special drivers required). - * - * On start-up the system will automatically enumerate and function as an - * external mass storage device with two LUNs (separate disks) which may - * be formatted and used in the same manner as commercial USB Mass Storage - * devices. - * - * You will need to format the mass storage drives upon first run of this - * demonstration - as the device acts only as a data block transport between - * the host and the storage media, it does not matter what file system is used, - * as the data interpretation is performed by the host and not the USB device. - * - * This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS - * value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to - * 255), with each LUN being allocated an equal portion of the available - * Dataflash memory. - * - * The USB control endpoint is managed entirely by the library using endpoint - * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for - * the host to reset the Mass Storage device state during long transfers without - * the need for complicated polling logic. - * - * \section SSec_Options Project Options - * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. - * - * - * - * - * - * - * - * - * - * - * - * - *
Define Name:Location:Description:
TOTAL_LUNSMassStorage.hTotal number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive - * - this can be set to any positive non-zero amount.
- */ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Mass Storage Device Demo + * + * \section SSec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * - Series 7 USB AVRs + * - Series 6 USB AVRs + * - Series 4 USB AVRs + * - Series 2 USB AVRs + * + * \section SSec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
USB Mode:Device
USB Class:Mass Storage Device
USB Subclass:Bulk-Only Transport
Relevant Standards:USBIF Mass Storage Standard \n + * USB Bulk-Only Transport Standard \n + * SCSI Primary Commands Specification \n + * SCSI Block Commands Specification
Usable Speeds:Full Speed Mode
+ * + * \section SSec_Description Project Description: + * + * Dual LUN Mass Storage demonstration application. This gives a simple + * reference application for implementing a multiple LUN USB Mass Storage + * device using the basic USB UFI drivers in all modern OSes (i.e. no + * special drivers required). + * + * On start-up the system will automatically enumerate and function as an + * external mass storage device with two LUNs (separate disks) which may + * be formatted and used in the same manner as commercial USB Mass Storage + * devices. + * + * You will need to format the mass storage drives upon first run of this + * demonstration - as the device acts only as a data block transport between + * the host and the storage media, it does not matter what file system is used, + * as the data interpretation is performed by the host and not the USB device. + * + * This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS + * value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to + * 255), with each LUN being allocated an equal portion of the available + * Dataflash memory. + * + * The USB control endpoint is managed entirely by the library using endpoint + * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for + * the host to reset the Mass Storage device state during long transfers without + * the need for complicated polling logic. + * + * \section SSec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * + * + * + * + * + * + * + * + * + * + * + *
Define Name:Location:Description:
TOTAL_LUNSMassStorage.hTotal number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive + * - this can be set to any positive non-zero amount.
+ */